Instruction/ maintenance manual of the product AT8700 Niles
Go to page of 28
MODEL S AT 8500 AT 8700 B LENDING H IGH F IDELITY AND A RCHITECTURE ® INST ALLA TION & OPERA TION GUIDE MODEL S AT 8500 AT 8700 AD V ANCED TECHNOL OG Y ® IN-W ALL L OUDSPEAKERS DS00222A/AT8500-8.
Congr at ulations! Thank you for choosing Advanced T echnology In-W all Loudspeakers from Niles. W ith proper installation and operation, you'll enjoy years of trouble-free use. Niles manufactures the industry's most complete line of custom installation components and accessories for audio/video systems.
Intr oduction The A T or Advanced T echnology group of In-W all Loudspeakers are designed to deliver truly stunning performance with optimum installation flexibility .
Computer Optimized Crossover with Acoustical Configuration Controls The second order Linkwitz-Riley crossover is computer optimized and constructed of premium components for unparalleled sonic performance. The baffle-mounted T one Controls provide installers with Bass, Midrange and T reble adjustment in four increments (-2dB, Flat, +2dB, +4dB).
New Construction Wings Bracket Frame Speaker Baffle Grille Recommended Amplifier Power For satisfactory performance, we recom- mend an amplifier with a power rating of twenty to two hundred watts for the A T8500 and A T8700 speakers. Curiously , most speakers are not damaged by large amplifiers but by small amplifiers.
are connected in line with the speaker , so you must connect the wire from the ampli- fier to the volume control and then from the volume control to the speaker . Speaker Wire Use 2-conductor speaker wire when con- necting A T speakers to your receiver or amplifier .
appreciate the tighter bass and extended frequency response into the lower octaves that the use of a backbox (or blocking off the wall cavity) will provide. A hole cutting template is provided with the A T8000 Series Bracket Kit. The cutout for the speak- er must measure 9 - 3/4” x 1 7- 1/4”.
clarity , detail and the textures of the individ- ual instruments, you are a critical listener . In a home theater , the intelligibility of dialog and action reproduced by the front speakers is paramount! The position of the speakers plays a very important role in how clear the sound is and how a stereo image is created.
speakers in an array around the listening area, so that the music is always surround- ing you, regardless of the direction you face. The rule of thumb is to add one pair of speakers for every 100 to 200 square feet of listening area.
the wall or even down low at power outlet height, in the ceiling, near corners, or directed at reflective objects and walls. The more reflected sound there is in the room the stronger the ambient effect at low vol- umes.
lation of an array of speakers. If you place them near a hard reflecting surface you can make one pair of speakers sound like sever- al. Create as many reflections as possible by mounting the speakers.
Inst allation F undament als Running the Speaker Wire in New Construction If you have doubts about whether you are capable of installing Niles A T Series speak- ers in your walls, consult a Niles dealer or professional installer . They have special tools, techniques, and experience to make the impossible possible.
Pulling the Cable Pull the cable in sections (from the stereo to the volume control, from the volume control to the speaker). Start with the longest sections and use left over wire to complete the short sections.
stereo system itself (See Figure 9) . The other very common route is through the bottom plate of the wall into an unfinished basement or crawl space. Identify where all of your electrical, phone, and TV wiring is likely to be and plan to route around it all.
Sometimes, an under -the-carpet run is possible (there are special flat speaker wires made for under -the-rug wire runs). As a last resort, heating and air condi- tioning vents can be used as wire race- ways for plenum rated wire (check your local building codes, some municipalities require conduit).
Inst allation o f Br acke ts, F r ames and Grilles in Ne w Constr uction Stage One: Before Drywall is Hung Insulating the W all Cavity . If feasible, fill the wall cavity with insula- tion at this point. Attach the wings to the bracket by snapping them into the sides of the bracket.
Screw one side of the assembled bracket with wings to the stud using one of the sup- plied screws. Level the bracket. Screw the other side of the bracket to the stud. T wo or three screws (depending upon the size of the model) on each side makes for a very secure installation.
Inst allation o f Br acke ts, F r ames and Grilles in Existing W alls Important: Before you cut into any wall, review the sections on running wire and speaker placement.
7. Attach the frame to the bracket by screw- ing the frame to the bracket using the supplied screws. Do not overtighten the screws, this will distort the frame and the grilles will not fit (this is not permanent, just loosen the screws and the grille will pop in).
Installing the Speaker If the grille is already installed, remove it by using a bent paper clip or the tip of a corkscrew and pulling it away from the frame (See Figure 1 8) . 1. Separate the speaker wire so that at least two inches of each conductor are free.
In-W all at Ear Level The A T8500 and A T8700 speakers will per- form their best when installed at ear level and spaced within the “good placement zone for music” (See “Speaker Placement” on page 5) .
When utilizing A T8500 or A T8700 speakers to reproduce rear channel information in a home theater , the goal is to create as many reflections as possible by mounting the speakers up high in the wall or in the ceiling and aim the Midrange/T weeter Array into the corners or at an adjoining wall to diffuse the sound (See Figures 5 and 6 on page 8) .
Specifications Model A T8500 Driver Compliment WOOFER — 8” aluminum/urethane cone with a cast aluminum frame, vented pole piece, high temperature aluminum voice coil former , an inverted dust cap,.
Specifications 22 Specifications Model A T8700 Driver Compliment WOOFER — 8” aluminum/titanium/urethane cone with a cast aluminum frame, bi-filer voice coil winding, a vented pole piece, an extrem.
DET ACH HERE AND RETURN TO: Niles Audio Corporation Warranty Registration Dept. P .O. Box 160818 Miami, Florida 33 1 16- 0818 Model Purchased __________________ ____________ _____ ________________ ___.
PLEASE FILL OUT THE W ARRANTY REGISTRA TION CARD ON THE REVERSE SIDE, DET ACH, AND MAIL T O: Niles Audio Corporation W arranty Registration Dept. P .O.
Limit ed W arr anty 25 L imited W arr anty Niles Audio Corporation ("NILES") warrants its loudspeaker products to the original pur chaser to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase.
Niles Audio Corporation 1 233 1 S. W . 1 30 Str eet Miami, Florida 3 3 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 www .nilesaudio.com Printed in T aiwan © 1 999 Niles Audio Corporation DS00 222.
An important point after buying a device Niles Niles AT8700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Niles AT8700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Niles AT8700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Niles AT8700 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Niles AT8700 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Niles AT8700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Niles AT8700.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Niles AT8700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Niles AT8700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
