Instruction/ maintenance manual of the product SSVC-4 Niles Audio
Go to page of 8
Niles Audio Corporation www.nilesaudio.com 12 33 1 S. W . 1 30 Street M iami, Florida 3 3 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 ® ©2004 Niles Audio Corporation. All rights reserved. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.
Introduction The SSVC series is a combination speaker selector and volume controller. It allows you to connect multiple pairs of speakers to your stereo receiver or amplifier and adjust the volume of any pair independently. Additionally, you can choose to listen to any pair of speakers, or any combination of pairs simultane- ously.
SS VC-4 SPEAKER SELECTOR/VOLUME CONTROL SYSTEM 1 2 3 4 Niles Audio Corporation Miami, Florida USA AMPLIFIER SPEAKER 4 SPEAKER 3 SPEAKER 2 SPEAKER 1 1 SPEAKER PAIRS 5/6 2 3/4 12 position volume control provides greater attenuation than conventional 10 position designs.
IMPORTANT DO NOT use the SSVC- 2/4/6 with amps or receivers rated at more than 1 00 watts per chan- nel RMS at 8 ohms. Installation Considerations Power Handling The SSVC-2, SSVC-4, and SSVC-6 are designed for use with a receiver or amplifier having a maximum power output of 100 watts per channel at 8 ohms.
Installation 1. Select a convenient location for the SSVC-2/4/6 . 2. Run all the necessary wiring to the SSVC-2/4/6 . Label the wires for future reference. See (Figure 1). 3. Locate the connector plugs (and remove them if they are plugged in). See (Figure 2) and (Figure 4).
SSVC-4/6 connector installation a. Insert each wire into the appropriate hole on the removable connector plug. b. Use a small flathead screwdriver to tighten each wire in place. c. Insert the connector plug into the socket and lock in place by tightening captive screws on each side of connector.
Balancing Speaker Volume The volume control on your receiver or amplifier serves as the “master” volume for all speaker pairs connected. The volume level of the speakers may vary from room to room. This is caused by several factors. Two lesser factors are the size of the speaker and its efficiency.
13 S PEAKER S ELECTION /V OLUME C ONTROL S YSTEM Notes Features and Benefits • Power handling: 100 watts per channel RMS; 200 watts peak • Selectable impedance magnification for 1, 2, 3/4, 5/6 pai.
An important point after buying a device Niles Audio SSVC-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Audio SSVC-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Audio SSVC-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Audio SSVC-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Audio SSVC-4 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Audio SSVC-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Audio SSVC-4.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Audio SSVC-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Audio SSVC-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
