Instruction/ maintenance manual of the product RS5 Niles Audio
Go to page of 24
B LENDING H IGH F IDELITY AND A R CHITE CTURE ® INST ALLA TION & OPERA TION GUIDE ® MODEL S R S 5 RS 5 RS 5 W eatherproof Roc k Loudspeaker GRANITE SANDS T ONE CORAL DS00366ACN_RS5Rock Speakers.
CONGRA TULA TIONS Thank you for choosing a Rock Loudspeaker from Niles. With proper installation and operation, you’ll enjoy years of trouble free use. Niles’ manufacturers the industry’s most complete line of custom installation components and accessories for audio/video systems.
INTRODUCTION The RS5 series of weatherproof rock loudspeakers are designed to provide unparalleled listening satisfaction and GeoRealistic™ styling. The extraordinary sonic performance of the RS5 was achieved by harmonizing Niles' unique and proprietary technology with advances in cabinet assembly techniques.
FEA TURES & BENEFITS GeoRealistic™ Styling Traditionally, rock speakers have looked like ornaments and not like rocks. Each RS5 style has unique textures and colors that are fashioned after natural rocks. Shaped grilles match the features on the front of the rock, making them blend into the cabinet.
Precision Crossover A customized electronic dividing network inside the cabinet precisely distributes the music to the woofer and the tweeter. The three-pole two-way design of the RS5 crossover provides excellent stereo imaging, low distortion and superior sonic performance.
INST ALLA TION CONSIDERA TIONS Tools and Materials Required • A wire stripper • 1/2" PVC conduit (optional) • PVC conduit glue and cleaner (optional) • PVC cutting tool • Trench digger .
Figure 1 shows how this would work for a square area of 28 feet by 20 feet and using stereo signals. Using our spacing rules as shown in Table 1 , leads to the need for four speakers. The loudspeaker coverage pattern is shown in the diagram. Figure 2 shows the same area as Figure 1 , however the number of speakers has increased by 2.
Figure 3 shows the difference in coverage area using the spacing rules for mono signals. Using the same four speakers as we did in Figure 1, we can increase our coverage area from 560 square feet (52 sq. meters) to 960 square feet (88.3 sq. meters), simply by using a mono source.
• You will need 2-conductor speaker cable that clearly identifies each conductor in the cable. If burying your cable in the ground is required, use cable rated for direct burial or run cable through PVC pipe.
Volume controls provide flexibility and customization to make the system reliable and easy to use. Consult your local Niles’ dealer for more information about using volume controls. Recommended Amplifier Power We recommend an amplifier with a power rating of ten to one hundred watts per channel for optimum performance.
INST ALLA TION Run the speaker cable Determine the location of the amplifier that will power the loudspeakers. The amplifier should be located in an area that protects it from the weather. Refer to the amplifier installation instructions to ensure that the amplifier is not located in an area that does not meet its recommended operating environment.
4. Connect one stripped end of the speaker cable coming from the amplifier to the RS5 connection cable’s red wire. To connect the two wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire.
1. Point the speakers at each other, rather than at the area you want to cover. 2. Play some music with the amplifier or receiver set to Mono. 3. Stand so you are the same distance from each speaker and listen to the richness of the bass and the loudness of the sound.
Installing the Security Bracket and Cable 1. With the loudspeaker in the proper location per the layout, turn the loudspeaker over so the bottom of the loudspeaker is facing you, as shown in Figure 7 . 2. Take the nylon security cable, supplied with the loudspeaker and fold it in half.
4. Pull the ends of the security cable with the loops as tight as you can until the knot around the security eyelet is tightened as shown in Figure 11 . 5. Feed the Security Stake through the loops at the end of the security cable and insure that they are inserted into the cable holder provided at the top of the stake, as shown in Figure 12 .
surface of the ground, as shown in Figure 13 . 7. Pull on the security cable and verify that the stake is securely held in the ground. Upgraded Security Attachment Method (Optional) To perform this attachment method you will need the following items: 1.
8. Loop this end of the aircraft cable around the eyelet and back to the aircraft cable. Secure this end of the cable to the main aircraft cable with the wire rope clamp.
OPERA TION Listening at Higher Volumes Outdoors there are no walls to reflect and contain the sound and typically the ambient noise level is louder. This causes the system to require more power to achieve a reasonable listening level than it does when you are listening indoors.
SPECIFIC A TIONS 1 8 SPECIFIC A TIONS Recommended Amplifier Power 10 to 100 Watts Nominal Impedance 8 Ohms Frequency Response 70 Hz to 20 kHz Sensitivity 90 decibels for 2.
NOTES _______________________________________________________________________ _______________________________________________________________________ __________________________________________________.
PLEASE FILL OUT THE W ARRANTY REGISTRA TION C ARD ON THE REVERSE SIDE, DET A CH, AND MAIL T O: Niles Audio Corpor ation W arr anty Registr ation Dept. P .
DETACH HERE AND RETURN TO: Niles Audio Corporation Warranty Registration Dept. P .O. Box 160818 Miami, Florida 3 31 16 - 0818 M o d e l P u r c h a s e d ______________________ ____________ _____ ____.
DETACH HERE AND RETURN TO: Niles Audio Corporation Warranty Registration Dept. P .O. Box 160818 Miami, Florida 3 31 16 - 0818 5 YEAR LIMITED W ARRANTY Niles Audio Corporation ("NILES") warra.
Niles Audio Corporation 1 23 3 1 S . W . 1 30 Street Miami, Florida 33 1 86 T el: (305) 238-43 73 Fax: (305) 238- 018 5 © 2004 Niles Audio Corporation.
An important point after buying a device Niles Audio RS5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Audio RS5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Audio RS5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Audio RS5 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Audio RS5 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Audio RS5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Audio RS5.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Audio RS5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Audio RS5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
