Instruction/ maintenance manual of the product IRP6 Niles Audio
Go to page of 5
An infrared (IR) extender system enables you to control your IR remote controlled A/V equipment from a remote location. This enables you to place your A/V com- ponents out of sight (behind cabi- net doors, in the rear of a room, or in a different room) and still conve- niently control your equipment.
Installation continued STEP 1. Connect and test the power sup- ply. If it tests OK, unplug the con- nector from the power socket and proceed. 2. Connect the first Sensor/ Keypad cable to either one of the Sensor inputs. 3. Test for shorts and interference.
10) Replace the IRP6+ If you have another IRP6+, replace the one in the system and retest, if not go to Step 1 1. 11) Replace the Sensor or Keypad If you have another Sensor or Keypad, exchange it and retest the system, otherwise return the IRP6+ and the sensor/keypad(s) to your local Niles dealer for testing.
(Have someone watch the green IR LED on the IRP6+ while you aim a remote control at a remote sensor and press a button). • IR Test LED Flashes: Go to Step 1 2 • IR Test LED Off: Go to Step 25 25) Bad Connections at the IRP6+ and/ or at the Sensor/Keypad.
IR System Compatible with virtually all brands of remotes using carrier frequencies between 1 8 and 1 00 kHz. As of this publication date, the only known components using carrier frequen- cies outside this range are Bang & Olufsen components and 1 996 model year Pioneer receivers using the ISC remote control (e.
An important point after buying a device Niles Audio IRP6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Audio IRP6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Audio IRP6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Audio IRP6 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Audio IRP6 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Audio IRP6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Audio IRP6.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Audio IRP6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Audio IRP6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
