Instruction/ maintenance manual of the product HPS-4/HPS-6 Niles Audio
Go to page of 8
Niles Audio Corporation www.nilesaudio.com 12 33 1 S. W . 1 30 Street M iami, Florida 3 3 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 ©2004 Niles Audio Corporation. All rights reserved. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.
Introduction The HPS series allows you to connect multiple pairs of speak- ers to your stereo receiver or amplifier and play any one pair, any combination of pairs, or all pairs at once.
Installation Considerations Power Handling The HPS series is designed for use with a receiver or amplifier having a maximum power output of 250 watts per channel at 8 ohms. Damage caused by the use of a higher-power receiv- er or amplifier will void the warranty.
Using the HPS Series with Tube-Type Amplifiers Virtually all tube amplifiers must have a load connected at all times. If the amplifier to be connected to the HPS-4/HPS-6 is a tube amplifier, be sure to always have at least one pair of speak- ers switched on at all times.
8 H IGH P OWER S PEAKER S ELECTION S YSTEM HPS-4 HIGH POWER SPEAKER SELECTION SYSTEM 1 234 PROTECTION AMPLIFIER SPEAKER 4 SPEAKER 3 SPEAKER 2 SPEAKER 1 Niles Audio Corporation Miami, Florida USA ON OFF CONSTANT PROTECTION Recessed areas for custom room labels.
9 H IGH P OWER S PEAKER S ELECTION S YSTEM TUNER 94.9 15 AMPLIFIER AMPLIF IER SPEAKER 4 SPEAKER 4 SPEAKER 3 SPEAKE R 3 SPEAKER 2 SPEAKER 2 SPEAKER 1 SPEAKE R 1 Niles Audio Corporation Miami, Florida U.
11 H IGH P OWER S PEAKER S ELECTION S YSTEM Playing Two or More Speaker Pairs Simultaneously 1. Make sure the amplifier or receiver power is OFF and set the volume to minimum. 2. On the right side of the HPS-4/HPS-6’s front panel is a but- ton labeled PROTECTION.
6. To turn off one or more speaker pairs, simply press the corresponding on/off button(s) on the speaker selector. Refer to the protection chart for the correct setting of the Protection button.
An important point after buying a device Niles Audio HPS-4/HPS-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Niles Audio HPS-4/HPS-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Niles Audio HPS-4/HPS-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Niles Audio HPS-4/HPS-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Niles Audio HPS-4/HPS-6 will certainly help you make a decision on the purchase.
If you already are a holder of Niles Audio HPS-4/HPS-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Niles Audio HPS-4/HPS-6.
However, one of the most important roles played by the user manual is to help in solving problems with Niles Audio HPS-4/HPS-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Niles Audio HPS-4/HPS-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
