Instruction/ maintenance manual of the product V1 Nikon
Go to page of 228
DIGIT AL CAMERA Refer ence Manual En.
Thank you f or your pur chase of a Nikon digital camera. T o get the most fr om your cam era, please be su re to r ead all instruc - tions thoroughly and keep them where they will be r ead by all who use the product. Camera Settings The explanations in this manual a ssume that default settings are used.
i Getting the Most from Y our Camer a 0 ii T able of Con tents 0 iv s Introduction 0 1 z Still Image Mode 0 23 8 Smart Photo S elector Mode 0 31 y Movie Mode 0 37 9 Motion Snapshot Mode 0 45 t More on.
ii Getting the Most from Y our C amera T ake pictures or movies in any of four modes. Choose q Motion Snapshot mode ( 0 45) to recor d both photographs and brief movie vignettes, w Smart Photo Selecto.
iii Acc essories Expand your photographic horizons with a wide variet y of inter- changeable lenses, flash units, and other accessories ( 0 161). Lenses Flash units GPS units Remote cont rols Soft ware for Nikon digital cam era s (available on CD) Vi e w short movies in high definition.
iv Getting the Most from Your Camera .............. ............... ............ ii Accessories .............................................................................................. iii Table of Contents ................... .............. ...
v Movie Mode ........ .......... ............. .......... ............. .......... .... 37 HD Movies..... ............ .............. ........... ............... ........... .............. ... 37 Slow Motion ................ .............. ...........
vi Connections ...... ............. ............... ............. ............. ........ 81 Installing the Supplied Softwar e ................ .............. .............. ..8 1 System Requirements............................... .....................
vii Image Quality ........... .............. ........... ............... ........... .............. . 119 Image Size........ ............ .............. ........... .............. ............ ............ 119 Continuous ............ ........... .....
viii Face-Priority A F......... ........... .............. ............ .............. ........... .. 147 Built-in AF As sist ....... .............. ........... ............... ........... ............. 147 Flash Control .... .............. ..........
ix Technical Notes .................. ............. ............ ................ .. 161 Optional Acces sories . ........... .............. ............ .............. ........... . 161 Approved Memory Cards............................................
x T o prevent d amage to you r Nikon product or injury to yours elf or to o thers, read the following safety precautions in their entirety before using this equip- ment. Keep these safety ins tructions whe re all those who use th e product will read them.
xi A Do not remain in contact with the camera or charger for extended periods while the devices are on or in use. Parts of the device become ho t. Leaving the device in direct cont act with the skin for extended periods ma y result in low-temperature burn s.
xii A Observe proper precautions when handling the charger: • Keep dry . F ailure to obser ve this precaution could r esult in fire or electric sho ck. • Do not short the charger terminals. F ailure to observe this precaution could result in overheating and damage to the ch arger .
xiii • No par t of the manual s included with this product may be r epro- duced, transmitted, transcribed , stored in a retrieval system, or trans- lated into any language in any f orm, by any means, without Nikon ’ s prior written permission.
xiv Notice for Cust omers in the U . S. A. Power Cab le At voltages ov er AC 125 V (U.S.A. only) : Th e power cable must be rat ed for the volt- age in use, be at least A WG no. 18 ga uge, and have SVG insulation or better with a NEMA 6P-15 plug rated for A C 250 V 15 A.
xv Notice Concerning Prohibitio n of Copying or R eproduction Note tha t simpl y being in po ssessio n of material that has been digitally cop- ied or reproduced by means of a scanne r, digi tal camera, or other device may be punishable by law.
xvi A V C Patent Portfolio License T HIS PRODUCT IS LICENSED UNDER THE AV C PATENT POR TFOLIO LICENSE FOR THE PERSONAL AND NON - COMMERCIAL USE OF A CON SUMER TO ( I ) ENCODE VIDEO IN COMPLIANCE WITH .
xvii D Use Only Nikon Brand Accessories Only Nikon brand accessories c ertified by Nikon specifically fo r use with your Nikon digital camera ar e engineered and pr oven t o operate within its operational and safety requirements. T HE USE OF NON -N IKON ACCESSOR IES COUL D DAMAGE YOUR CAMERA AND MAY VOID YO UR N IKON WAR - RANTY .
xviii.
1 s s Introduc tion Confirm that the package contains the following items: Memory cards are sold separ ately . Pac k ag e Con te n ts BS-N1000 multi accessor y por t cover BF-N1000 body cap Nikon 1 V1.
2 s T ake a few moments to familiarize yourself with ca mera controls and displays. Y ou may find it helpful to bookmark this section an d refe r to it a s yo u rea d th rou gh the re st of t he man ual . The Camer a Body Par t s o f t he Came ra 4 6 3 5 7 8 9 2 1 15 10 11 13 14 18 16 17 19 20 12 1 Mounting mark .
3 s The Camera Body ( Continued) 1 2 3 4 5 18 15 16 17 14 6 7 9 11 12 8 10 19 20 13 1 Eye sensor . .............. ........... ............... ...... 6 2 Electronic viewfinde r ...... ............... ...... 6 3 Diopter adjustment cont rol .............
4 s The Monitor * Available only in deta iled display ( 0 5). 4 2 1 3 5 6 7 8 9 25 22 24 23 19 18 17 16 21 20 13 14 10 11 12 15 27 33 28 29 31 30 32 26 1 Shooting mode ......... .............. ........... ... 7 2 Exposure mode ............ ...........
5 s The $ (Display) Button ❚❚ Shooting ❚❚ Play back Press $ to c ycle through shootin g ( 0 4) and playback ( 0 69) indicators as shown below .
6 s A The Elec tronic Viewfi nder Use the viewfinder when bright ambient lighting conditions make it difficult to see the display in the monito r . The viewfinder dis- play turns on when you put your eye to the viewfinder and is identical to that shown on page 4; the monitor turns off automatically .
7 s The Mode Dial The camera offers a choice of the follow - ing shooting modes: Mode dial Motion Snapshot mode ( 0 45): Each time the shu tter is released, the cam- era records a still image and abou t a second of movie footage.
8 s The Multi Selector The multi selector and J button are used to adjust settings a nd navigate the camera menus. ❚❚ Displayi ng Shooti ng Opti ons ❚❚ Selecting Shooting Options ❚❚ Menu N.
9 s The & (F eature) Button • Shutter type (still-image mode ; 0 27 ) : Choose a mechanical ( Mechanical ) or electronic shutter ( Electron ic ), or shoot high- speed bursts with Electronic (Hi) . • Movie mode (mo vie reco rding ; 0 39 ) : Choose from h igh- d efinition ( HD movie ) and slow-motion ( Sl ow motion ) recording.
10 s The G Button Most shooting , play back, and setup options can be accessed from the camera menus. T o view the menus, press the G button. G button Ta b s Choose from t he following menus: K Playback m enu ( 0 101) B Setu p m enu ( 0 15 1) C y 1 z Shooting menu ( 0 109) Menu options Options in current menu.
11 s ❚❚ Using the Me nus T o exit the menus and return to shooting mode, press the shut- ter-release button halfway ( 0 26). Use the multi selector to navigat e the menus ( 0 8). Multi sele ctor 1 2 Select desired menu. Press 2 to place cursor in selected m enu.
12 s 1 Attach t he cam era st rap. Attach the strap securely t o the two camera eyelets . 2 Charge the battery . Inser t the AC adapter plug int o the battery charger q , then in se rt th e ba tt e ry w and plug the charger in. An exhausted battery fully charges in a bout 2 hours and 35 minutes.
13 s A The AC Wa ll Adapter If an AC wall adapter is supplied with the camera, it can be attached by inserting it into the charger inlet ( q ) and then sliding the wall adapter latch ( w ) while rotating the adapter 90° to fix it in the position shown ( e ).
14 s D The Battery and C harger Read and follow the warnings and cautions on pages x–xii and 169– 172 of this m anual . Do not use the bat tery at a mbient temperatu res below 0 °C/32 °F or abov e 40 °C/104 °F; failure to obse rve this precau- tion could damage the batter y or impair its performance.
15 s 3 Inser t the battery and a memor y card. Check to be sure the battery and card are in the correct orien- tation. Slide the battery in until the orange battery latch locks it in place and slide the memory card until it clicks into place.
16 s A Removing Ba tteri es and Memory Cards After turni ng the camera off, confirm that the access lamp is off and open the ba t- tery-chamber/memor y card slot cove r . T o remove the battery (top), first release it by pressing the orange batt ery latch in the direction shown by the arrow and then remove the ba ttery by hand.
17 s 4 Attach a lens . Be careful to prevent dust from entering the camera when the lens or body cap is removed . The lens generally used in this manual fo r illustrative pu rposes is a 1 NIKK OR VR 10– 30 mm f/3.5–5.6. See page 143 for info rmation on vibration reduc tion ( VR).
18 s 5 T u rn the camera on. Press the power s witch to turn t he camera on. The power lamp will briefly light green and the monitor will turn on. A Tur n i n g t h e C a m e r a O f f T o turn the camera off, pr ess the power switch again. The monitor will turn off.
19 s 6 Choose a langu age and set the cl ock. A language -selection d ialog will be displayed the first time the camera is turned on. Use the multi selec tor and J button ( 0 11) to choose a languag e and set the camera clock. Pho- tos can not be taken until you hav e set the time and dat e.
20 s A The Camera Clo ck The camera clock is less accurate than most watches and household clocks. Check the clock regularly ag ainst more accurate time pieces and reset as necessar y .
21 s 7 Check the batter y level and memory card capacity. Check the battery level and number of exposures remaining in the moni- tor . ❚❚ Batter y Level ❚❚ Number of Exposures Remaining The mo.
22 s.
23 z z Still Image Mode Still image mode is the mode ge nerally used for taking photos. 1 Select still image mode . T aking Photos in Still Image Mode Rotate the mode dial to C . Mode dial A Automatic Scene Selection ( h Scene auto selector) At default settings, the camera will auto- matically analyze the subject and select the appropriate scene.
24 z 2 Ready the camera. Remov e the lens cap and ho ld the camera securely w ith both hands, being careful not to obstruc t the lens, AF-assist illuminator , or microphone. Rotate the camera as shown at lower right when taking pic tures in “tall” (por trait) orientation.
25 z 3 Frame the photograph. 4 Focus . Press the shutter-re lease button half- way to focus . If the subject is poor ly lit, the AF-assist illuminator ( 0 2) may light to assist the focus operation.
26 z 5 Shoot. Smoothly press the shutter-release button the rest of the way down to release the shutter and r ecord the photogra ph. The access lamp will light and the photograph will be dis- played in the monitor f or a few sec- onds (the photo will automatically clear from the display when the shut- ter-release button is pressed halfway).
27 z ❚❚ Choosing a Shutter T ype T o choose the shut ter type for still image mode, pr ess & and use the multi selector and J button to choose from the follow- ing shutter types: mechani cal (.
28 z T o end playback and return to shoot ing mode, press the shutter- release button halfway . Vie w i n g P h o t o g r a p h s Press K to dis play your mo st recent pho- tograph full frame in the monitor (full- frame playback). K button Press 4 or 2 or rotate the multi selector to view additional pictures.
29 z Deletin g Pictur es T o delete the current picture , press O . A confirmation dialog will be display ed; press O again to delete the pic ture and return to playback, or press K to exit without deleting the picture. Note that once deleted , pictures can not be recove red .
30 z.
31 8 8 Smar t Photo Selec tor Mode Choose Smart Photo Selector mode f or photos th at capture a fleeting expr ession on the face of a portrait subject or other hard-to-time shots such as group photos in par ty s cenes.
32 8 3 Begin buffering photographs. Pr ess the shutter-release butt on half- way to focus ( 0 25). An icon wi ll be displayed as the camera begins recording images to the memory buffer .
33 8 4 Shoot. Smoothly press the shutter-release button t he res t of the w ay d own. The camera wi ll compare shots recorded to the buffer both before and after the shutter-release button w as pressed , and s ele ct fi v e t o c opy t o the me mo ry card.
34 8 Choosing the Best Shot Vie w i n g P h o t o g r a p h s Pres s K and use the multi selector to display photographs taken with the Smar t Photo Selector ( 0 28; pic tures taken with the Smar t Photo Selector are indicated by a y ic on).
35 8 Deletin g Pictur es Pres sin g O when a picture taken with the Smar t Photo Selector is selec ted displays a confirmati on dialog; press O again to delete the photographs selected by the Smar t Photo Selector , or press K to ex it without deleting the pictures.
36 8.
37 y y Movie Mode Choose movie m ode to shoot h igh- d efinition (HD) or slow- motion ( 0 40) movies using the movie-record button. Record movies with so und at an aspect ratio of 16 : 9 . 1 Select movie mode. 2 Fr ame the op ening shot . D The 0 Icon A 0 icon indicates that movies can not be recorded.
38 y 3 Star t re cording. Pr ess the movie-record butt on to begi n rec ordin g. A re cordi ng i ndi ca- tor , the time elapsed, and the time available are displa yed while r ecord- ing is in progress . 4 End re cordin g. Press t he m ovie - record butt on aga in to end recordi ng.
39 y ❚❚ T aking Phot ographs Duri ng HD Movie Recording Pres s the shutte r-relea se button all the way down to take a photograph without interrupting HD movie recording . Photo- graphs take n during movie r ecord ing have an aspect ratio of 16 : 9.
40 y Record silent movies with an aspec t ratio of 8 : 3. Movies are recorded at 400 fps and play ba ck at 30 f ps. 1 Select movie mode. 2 Select s low -mo tion mode . 3 Fr ame the op ening shot . Slow Motion Rotate the mode dial to 1 . Mode dial Press the & button and use the multi selector and J button to select Slow motion .
41 y 4 Star t record ing. 5 End re cordi ng. Press the movie-record button again to end recording. Recording will end automa tica lly when the maximum length is reached, the memory card is full , another mode is selected, the lens is removed , or the camera becomes hot ( 0 xv i ).
42 y Movies are indicated by a 1 icon in full-frame playback ( 0 28). Press J to sta r t pl ayba ck . The following operations can be performed: V iewing Mo vies 1 icon/L ength Movie playback indic ator/ Current positi on/total length Guide Volume To Use Description Pau s e Pau s e p la y b a ck .
43 y Deleti ng Mo vies T o delete the current movie, press O . A confirmation dialog will be display ed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie . Note that once deleted , movies c an not be recov ered .
44 y.
45 9 9 Motion Snapshot Mode Choose Motion Snapshot mode to record brief movie vignettes with your photogr aphs. Each t ime the shutter is r eleased, the camera records a still image and a bout a second of movie foot- age.
46 9 3 Begin buffering. 4 Shoot. Smoothly pr ess the shutt er-relea se button the r est of the way down. The camera will r ecord a photog raph, together with about a second of movie footage beginning bef ore and ending after the time the shutt er- release button was pressed.
47 9 ❚❚ Choosing a Theme T o choose the background music for the movie, press & and use the multi selector and J button to choo se from Beauty , Wav e s , Relaxation , and T enderness .
48 9 Deleting Motion Snapshots T o delete the curr ent Motion S napshot, press O . A confirmation dialog will be display ed; press O again to delete th e photo and movie and return to pla y- back, or press K to exit without deleting the file. Note that once de leted, Motion Snapshots can not be rec overed .
49 t t More on Photograph y The self-timer and optional ML-L3 r emote contr ol ( 0 163) can be used to reduce came ra shake or for self-por traits. Th e following options are available: 1 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a sta- ble, level surface.
50 t 3 Select th e de s ired option . 4 Fr ame the photograph and shoot. Self-timer mode : Pr ess the sh utter- release button halfway t o focus , and then press the button the rest of the way dow n. The self-timer lamp will star t to blink and a beep will begin to sound.
51 t Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be r e leased.
52 t Choose how the camera focuses (note that focus mode selection is not available in h Scene auto selector mode; 0 23, 111). * Shutter can only be r eleased i f camera is able to focus . Fo cu s M o de AF-A Auto-select AF : The camera aut omatically selects AF-S if the subject is stationar y , AF-C if it is moving.
53 t 1 Display f ocus mode opt ions. 2 Select the desir ed option. Pres s 3 ( % ) to displa y fo cus mode options . Use the multi selec tor to highlight the desired option and press J .
54 t A Getting Good Results with Autofocus Autofo cus does not per form well under the c onditions listed below . The shutter r elease may be disabl ed if the camera is unable t o focus under these co.
55 t Manual F ocus Manual focus can be used when autofocus do es not produce the desired results. 1 Selec t manual focus mode. 2 Displa y the manual fo cus guides . Press 3 ( % ) and select MF (manual focu s; 0 52). Press J to magnify the view at the center of the fram e and displa y man- ual focus guides.
56 t 3 Focus . Rotate the multi selector until th e sub- ject is in focus. Rotate the multi selec- tor clockwise to in crease the f ocus distance , count erclockwise to decrease; the faster you r otate the multi selector , the quicker the f ocus distance changes.
57 t Exposure compensation is used to alt er exposure from the value suggested b y the camer a, making pictures bright er or darker . Choose from values between –3 EV (underexposure) and +3 E V (over exposure) in incremen ts of 1 / 3 EV . In general, positive values make the image br ighter while negative values make it darker .
58 t A Exposure Compensation Exposure compensation is most eff ective when used with center- weighted or spot metering ( 0 124). A Optional Flash Unit s When used with optional flash units, e xposure compensation aff ects both background exposure and flash level.
59 t In still image mode, the optional SB -N5 flash unit can be us ed for additional lighting, to “fill in” (illuminate) shadows and backlit subjects, or to add catch lights to your subjects’ eyes .
60 t A Optional Flash Unit s Flash units other than the SB-N5 can not be used. Detailed instructions may be f ound in the manual provided with the flash unit.
61 t Ta k i n g P i c t u r e s The camer a supports a variety of flash mod es for p hotog raphing poorly lit or back lit subjec ts. 1 T urn the camera and flash unit on. 2 Choose a flash mode. Choose a flash mode as described on page 63. 3 Position the flash h ead.
62 t ❚❚ Bounce Lighting Light from the flash can be “bounced” (reflected) from a ceiling or wall, dispersing the light from the flash to make shadows less harsh and reduce glare from hair , skin, clothing a nd foregr ound objects. The flash head on the op tional SB-N5 flas h unit can be rotated 90 ° up and 180 ° left or right.
63 t ❚❚ Flash Mode The flash mode can b e selected usin g the Fla sh mo de item in the shooting menu ( 0 109). 1 P Programmed auto or A Aperture -priority auto exposure modes on ly . 2 S Shutter-priority auto and M Manual exposu re modes on ly . N Fill flash : Use for additional lighting or to fill in shadows.
64 t 1 Select Flas h mo de . 2 Choose a flash mode. Press the G button to display the menus. Highlight Flash m od e in the shooting menu and press 2 . Use the multi selector to highlight the desired option and press J . Press the shutter button halfway to exit the menus and return to shooting mode .
65 t D Using a Flash When using a flash, be sure the subject is at a range of at least 0.6 m (2 ft) and remove lens hoods to prev ent vignetting (shadow s created where the end of the lens obscure s the optional flash unit). Note that some lenses may block the flash or capture illuminat or at some focal lengths or shooting distances.
66 t GP-N100 GPS units (a vailable sepa rately) can be used to recor d information on y our current position when pictures are taken. This information can be viewed on a computer using ViewNX 2 (supplied) or Capture NX 2 (available separat ely; 0 163).
67 t Setup M enu Optio ns • Auto po we r off : Choose whether the di spl ays turn off auto- matically when the GP -N100 is attached. • Position : This item is only available if the GP-N10 0 is cur.
68 t A Connection S tatus Connection status is shown by the h icon in the camera display ( 0 4) and the LED on the GP-N100: h icon LED Description h (blinks) Blinks (re d) The GPS unit is searching for a sign al. Pic- tures taken while the h icon is blinking do not include GPS data.
69 I I More on Pla yback ❚❚ Simple Photo Information Photo Information Photo information is superimpos ed on images display ed in full-frame playback ( 0 28). Press the $ button to cycle through simple photo inf ormation ( 0 69), detailed photo inf ormation ( 0 70), and no photo information.
70 I ❚❚ Detailed Phot o Informa tion Still images Movies 1 23 4 7 6 5 8 12 11 13 14 10 15 9 27 17 16 18 24 25 26 22 20 23 19 21 1 22 8 4 6 13 5 12 11 26 17 3 24 25 22 20 23 19 27 21 1 Shooting mode ................ ............... ...... 7 2 Frame number/total number of images 3 Protect status .
71 I A Histograms ( 0 70) Camera histograms are intended only as a guide and may differ from those in imaging applications. Sam ple histograms are shown below: • If brightness varies evenly across the image , the distribution of tones will be rela tively even.
72 I The following operations can be performed: Thumbnail Pl ayback T o view pictures in “ contact sheets” of 4, 9, or 72 images, pr ess W down when a pic- ture is displayed full frame.
73 I The following operations can be performed: Calendar Pl ayback T o view pict ures taken on a selected date, press W down when 72 pictures are dis- play ed ( 0 72). W contr ol Ful l- fra m e playback Calendar playback Thumbnail playback To Use Description Highlight date / Use multi selector to highlight date.
74 I The following operations can be performed: Playback Zoom T o zoom in on a photogr aph, display it full frame and pres s W up. Playback zoom is not availabl e with movies or Motion Snapshots. W contr ol To Use Description Zoom in o r out W Press up to zoom in, down to zoom out.
75 I Pictures can be deleted from the memory card as described below . Note that once deleted , pictures can not be rec over ed; prote cte d ima ges, however, will n ot b e del eted.
76 I Rate pic tures or mark them as candidates for later deletion ( 0 75). The Slide show optio n in the playback menu can be used to display only pictures wi th a selected rating or ratings ( 0 77). Rating is not av ailable with protected im ages. 1 Sel ec t a p ic ture.
77 I 1 Selec t the type of image used in the show . Highlight the desired option and press J . Slide Shows T o view a slide show of the pictures on the memory card, pr ess the G button, select Slide show in the playback menu, and follow the steps below .
78 I 2 Adjust display times and choos e a background track. Adjust the following options: Frame inte r val Choose h ow long each still image is displayed. Movie playb ack time Choose how much of each movie is played back before the next slide is displa yed.
79 I 3 Select Start . The following opera tions can be performed while a slide show is in progr ess: The options s hown at right are dis- played when the show ends . Select Resume to restart o r Exit to exit to the playback menu. Highlight St ar t and press J to star t the slide show .
80 I.
81 Q Q Connec tions Install the supplied sof tware to copy pictures to your computer for viewing and editing pictures and creating short movies. Before in stalling the software, c onfirm that y our syst em meets the requirements on page 83. 1 Start the computer and insert the installer ViewNX 2/ Short Movie Creator CD .
82 Q 3 Start the instal ler . Click Install and f ollow the on-screen instructions. 4 Exit the installer . Click Ye s (W i n d o w s ) o r OK (Mac OS) when installation is com- plete. The following software is installed: • Vie wN X 2 • Short M ovie Creator • Apple QuickTime ( Windows only) 5 Remove the installer CD from the CD-ROM drive.
83 Q System R equirements The system requirements f or the Short Movie Creator are: If your system does not meet the abov e requir ements, only ViewNX 2 will be insta lled ( 0 85).
84 Q The system requirements for the V iewNX 2 are: Windows CPU • Photos/JP EG movies : I ntel Celeron, Pentium 4, or Core series, 1.6 GHz or better • H.
85 Q T ransferring Pic tures 1 Choose how pictures will be copied to the computer . Choose one of the following methods: • Direct USB connec tion : T urn the camera off and ensur e that the memory ca rd is inserted in the camera.
86 Q 3 Click Start T ransfer . At default settings, all the pictures on the memory card will be copied to th e computer . 4 T erminate the connection. If the camera is connected to the c omputer , turn the camera off and disconnec t the USB cable.
87 Q ❚❚ Retouching Photographs T o crop pi ctures and perform such tasks as adjusting shar p- ness and tone levels, click the Edit button in the toolbar .
88 Q Creating Shor t Movies Use the supplied Short Movie Creator software to create mo vies combining ph otograp hs taken in s till image or Smart Photo Selector mode with Motion Snapshots, movies, and music . 1 T ransfer pic tures. T ransf er pictures as described on page 85.
89 Q 5 Save the movie. Click Create Movie . The dia- log shown at righ t will be displayed; select on e of the follow ing options and click Create . • Sa v e f i le : Save the movie to a folder on the computer . • Save to Camera (memor y c ard) : Save the movi e to a mem- ory card so that it can later be played back on the cam- era.
90 Q Connect the camera to a television or video recorder f or play- back or recording . Standard Definition Devices Before connecting the camera, confirm that th e camera video standar d ( 0 156) matches that used in the T V . 1 Connect the A/V cable .
91 Q High-Definition Devices A type C mini-pin H igh - D efinition M ultimedia I nter fa ce (HDM I) cable (av ailable separ ately fr om third -party suppliers) can be used to connect the camera to high-definition video devices. 1 Connect the HDMI cable.
92 Q ❚❚ HDMI Device Control T o control the camera remotely fr om a device that supports HDMI-CEC ( H igh- D efinition M ultimedia I nter face– C on- sumer E lectronics C ontrol), s elect On for HD MI dev ice co ntr ol in the camera setup menu.
93 Q Selected JPEG images can be printed o n a PictBridge prin ter con ne cte d d ir ect ly t o the ca mer a. Connecting the Printer Connect the camera using the supplied USB cable. 1 T urn the camera off . 2 Connect the USB cable. T urn the printer on and connect the USB cable as shown.
94 Q Printing Pictures One at a Time 1 Sel ec t a p ic ture. Press 4 or 2 t o v i e w a d d i t i o n a l p i c - tures. P ress W up to zoom in on the current frame ( 0 74; press W down to exit zoom). T o view nine pictures at a time, press W down when a picture is displayed ful l frame.
95 Q Printing Multiple Pictures 1 Displa y the PictBridge menu. 2 Choose an opti on. Highlight one of the follow ing options and press 2 . • Sel ect im ag es fo r pr in tin g : Selec t pic- tures fo r printing. • Sel ect by da te : P rint one copy of each picture taken on selected dates .
96 Q 3 Select pic tures or choose dates. If you chose Select images for printing or Print DPOF pr int ord er in Step 2 , press 4 or 2 or rotate the multi selec- tor to highlight pictures .
97 Q 4 Adjust p rint op tions. Press J to display PictBridge print options. Press 1 or 3 to highlight page size, bor der , or time stamp items and pr ess 2 t o display the options described on page 98; note that a warning will be displ ayed if the selected page s ize is too small for an index print.
98 Q A PictBridge Print Op tions Page size Highlight a page size (only si zes suppor ted by the current printer ar e listed) and pr ess J to s e l e c t a n d e x i t t o t h e p r e v i o u s menu (to print at the default pa ge size for the current printer , select Use printer settings ).
99 Q Creating a DPOF Print Order: Print Set The DPOF print order option is used to creat e digital “ print orders ” fo r Pict- Bridge -compatible printers and devices that support DPOF .
100 Q.
101 o o The Pla yback Menu T o display the playback menu, press G and selec t the play- back menu ta b ( K ). The playback menu contains the following options: G button Delete Delete multi ple images ( 0 75). Slid e sh ow View movies and photos in a slide show ( 0 77).
102 s z 8 y 9 t I Q o i g n Selecting Multiple Images Choosing the optio ns listed belo w dis- plays an image selection dialog . Press 4 or 2 or rotate the multi selector to high- light pictures (only pi ctures to which the operation applies are available for selec- tion).
103 o Choose whether to rotate “tal l” (por trait- orientation) pictures for display during playback . Note that because the camera itself is already in the appropriate orientation during shooting, images are not rotat ed automatically during image review .
104 s z 8 y 9 t I Q o i g n App li ed to se le cte d i ma ge s, D- Li gh ti ng cr ea t es c opie s t ha t h av e been processed to bright en shadows. Use to retouch dark or backlit p hotographs. Pres s 4 or 2 or rotate the multi selec tor to highlight an image ( 0 102 ) and press J to display the options shown at right.
105 o Creat e small copies of selected photo- graphs. Selec t Choose size and choo se a size from 1.1 M (1,280 × 856 pixels), 0.6 M (960 × 640 pixels), and 0.3 M (640 × 424 pixels), and then choose Select images . Press 4 or 2 or rotate the multi selector to highlight pictures ( 0 102) and press 1 or 3 to select or deselec t.
106 s z 8 y 9 t I Q o i g n Creat e a cr opped c opy o f selected photo - graph s. Press 4 or 2 or rotate the multi selector to highlight a picture ( 0 102) and press J to disp lay the image with the defaul t crop shown in yellow. Use t he controls below to choose a crop and save the copy .
107 o T rim footage fr om movies to creat e edited copies . 1 Select Choose start point or Choose end point . Choose from the following options: • Choose start point : T r im the opening foo tag e. • Choose end point : T rim the closing foot- age.
108 s z 8 y 9 t I Q o i g n D T rimming Movies Movies must be at least two seconds long . I f a copy can not be creat ed at the current pla yback position, th e curr ent position will be display ed in red in Step 4 an d no co py will be c reated. The co py wil l not be saved if there is insufficient space a vailable on the memory card.
109 i i The Shooting Menu T o display the shooting menu, press G and select the shoot- ing men u tab ( C , y , 1 , or z ). The sho otin g men u cont ai ns the following options: G button Reset shooting options Reset shooting options to default values ( 0 110).
110 i Select Ye s to reset the options in the shooting menu and other shooting settings to default values ( 0 177). Custom Picture Control Create custom Pi cture Contro ls ( 0 136). Color space Choose a color space for new pictures ( 0 138). Acti ve D-Lighting Avoid loss of detail in highlights and shadows ( 0 139).
111 i The options in the exposure mode menu offer varying degrees of control o ver shutter speed and aperture. Exposure Mode h Scene auto selector An automatic, “ point-and-shoot” mode in which the camera not only chooses shutter speed and aper ture but adjusts other settings to suit the subject ( 0 23).
112 i A Shutter Speed and Aperture The same exposure can be achieved with differ ent combinations of shutter speed and aperture. F ast shutt er speeds and large apertures freeze moving ob jects and soften background details, while s low shut- ter speeds and small apertures blur moving objects and bring out background details.
113 i P Programme d auto In this mode, the camera automatically adjusts shutter speed and aper ture for optimal exposure in most situations . This mode is rec ommended f or snapshots an d other situations in which you want to leav e the camer a in charge of shutter speed and aperture .
114 i S Shutter-priority auto In shutter-priori ty auto, you choose the shutter speed while the camera automa tically selects the aperture that will pr oduce the optimal exposure. Use slow shutter speeds to suggest motion b y blurring moving subjec ts, fast sh utter speeds to “freeze” motion.
115 i AA p e r t u r e - p r i o r i t y a u t o In aper ture-priority auto, you choose the aperture whi le the camera automatically selec ts the shutter speed that will produce the optimal exposure. Large aper tures (low f-numbers) reduce depth of field, blurring object s behind and in front of the main subject.
116 i MM a n u a l In manual expos ure mode, you control both shutter speed and aper ture. 1 Choose shutter speed and apert ure. Adjust shutter speed and aperture with refer ence to the ex posure indica- tor (see below).
117 i ❚❚ Long Time-Exposures (Manual Exposure Mode On ly) Select the following shutter speeds for long time- exposures of moving lights, the stars, night scenery , or firew orks. • Bulb : The shutter r emains open while the shutter-release button is held down.
118 i 2 Choose a shutter speed. Press W down until “Bulb ” is selected for shutter speed. For a shutter speed of “ Time” , select a remote control mode ( 0 49) after choosing the shut- ter speed. 3 Ope n th e sh u tt er . Bulb : After focusing , press the shutter-release button all the way down.
119 i Choose a file format and compression ratio for photographs taken in still image and Smart Photo S elector modes. Choose the siz e of photogr aphs taken in still image and Smart Phot o Selector mode s. * Print size in inches equals image size in pixels divided by printer resolution in d ots p er i nch (dpi; 1 inch = approximately 2.
120 i A NEF (RAW )/NEF (RAW ) + JPE G The option selected fo r image size does not affect the size of NEF (RA W ) images. NEF (RA W ) images can be viewed on the camera or using soft- ware such as Capture NX 2 (available separately ; 0 163) or ViewNX 2 (supplied).
121 i Choose whether th e camera takes one photograph each ti me the shutter-release button is pressed ( Single frame ) or reco rds photos at up to 5 fra mes per second (fps) while the shutter- release button is held down ( Continuous ).
122 i Choose the type of shutter used in still image mode ( 0 27). ❚❚ Electronic (Hi) Selecting Electronic ( Hi) displays the options shown at right, where you can choose t he frame a dvance rate used when Electronic (Hi) i s s e l e c t e d a s t h e shut ter t ype.
123 i Choose a frame size and frame rate for HD movies ( 0 37). * Sensor output is about 60 fps. Movie Settings Option Frame si ze (pixels) Recording rate Bit rate (approx.) Maximum length t 1080/60i 1,920 × 1,080 59.94 fields/s * 24 Mbps 20 minutes r 1080/30p 1,920 × 1,080 29.
124 i Choose how the camera s ets exposure. Regardless o f the option selected, metering is aut omatically adjusted to suit the sc ene when h Scene auto selec tor is selected for Exposure mode .
125 i Autoexposure L ock Exposure lock is used to recompose photographs after metering exposure. It is most effective when used with center-w eighted or spot metering ( 0 124) to fram e off-center subjects that are much brighter or darker than their surroundings or to optimize exposure for an object other than your main subject.
126 i White balance ensures that colors are unaff ected by the color of the light source . Auto white balance is rec ommended for most light sources, but other values can be selec ted if necessar y according to the type of source.
127 i Fine- T uning White Balance Options ot her than P reset manual can be fine-tuned as follows: 1 Displa y fine-tuning options. Highlight an option other than Preset manual and press 2 to display the fine -tuning options shown at right. 2 Fine-tune white balance.
128 i Preset Manual Preset manual is used to r ecord and recall custom white balance settings for shooting under mix ed lighting or to compensa te for light sources with a strong color cast. 1 Light a ref erence object. Place a neutral gray o r white objec t under the l ighting that will be used in the final pho togra ph.
129 i 3 Measur e whit e balanc e. When the camera is ready to measur e white balance , a flashing L will be displayed. Bef ore the indicator stops flashing, frame the ref erence object so that it fills the display and press the shutter-release button all the way down.
130 i D Auto Pow er Off White balance measur ement will end without a new value being acquired if no operations are pe rformed for the time selec ted for Auto powe r off in the setup menu ( 0 155; the default is 30 s).
131 i “ISO sensitivity ” is the digi tal equivalent of film speed. The higher the sensitivity, the less light needed to make an exposure, allowing faster shutter speeds or smaller aper tures, but the more likely the image is to be affected by “noise ” in the form of ran- domly-spaced bright pixels, fog, or lines.
132 i Choose how the camera processes photographs. Regardless of the option selected, the camera automatically chooses Picture Controls t o suit the scene when h Scene aut o selector is selected for Exposure mode .
133 i 2 Adjus t set tin gs. Pres s 1 or 3 to highlight the desire d setting and press 4 or 2 t o c h o o s e a value. Repeat this step until all set- tings have been adjusted , or select Quick adjust to choose a pr eset combination of settin gs. Default settings can be restored by pressing the O button.
134 i ❚❚ Picture Control Setti ngs * Not available if Active D-Lighting ( 0 139) is on; reset if Act ive D-Lighting is activated after value is changed. Quic k a dju st Choose from options between –2 and +2 t o r ed u c e o r exaggerate the effect of the selected P icture Con trol (note that this resets all manual adjustments).
135 i D “ A” (Auto) Results for auto sharpening, contrast, and saturation vary with expo- sure and the position of the subject in the frame. A The Picture Control Grid Press ing W up in St ep 2 di.
136 i The Picture Controls supplied with the camera can be modified and saved as custom Picture Controls. Edit/S ave T o create a custom Picture Control , select Edit/save and f ollow the steps below .
137 i Load from/Save to C ard Custom Picture C ontrols cr eated using the Picture Co ntrol Utility available with ViewNX 2 or optio nal soft ware such as C a p t u r e N X 2 c a n b e c o p i e d t o .
138 i The color space determines the gamut of colors available for color reproduction. Choose sRGB for photos that will be use d “ as is, ” with no fur ther modification, Adob e R GB for photos that will be extensi vely processed or retouched after leaving the camera.
139 i Active D-Ligh ting preserves details in highligh ts and shado ws for natural contrast. Use with hi gh contrast scenes such as a brightly lit outdoor view framed in a door or wi ndow or a sub- jects in the shade on a sunny day . I t is most effective when used with Matrix met ering ( 0 124).
140 i Photographs taken at slow shutter speeds are automatically pro- cessed to reduce “ noise” (bright spots , randomly-spaced bright pixels, or f og), slightly increasing record ing times.
141 i Adjust movie sound reco rding settings for the built-in micro - phone and optional ME-1 external microphones. ❚❚ Micropho ne Sele ct Microphone off to disable sound recor ding. Selec ting any other option enables recording and sets the microphone to the selected sensitivity.
142 i T ake photographs automatic ally at preset intervals. 1 Select Interval / Number of shots . Highlig ht Interval / Number of shots and press 2 to display interval timer options.
143 i This option is av ailable with lens es that supports vibration reduction ( VR). The options available var y with the type of l ens: Normal / Ac ti ve / Off for lenses that support active vibration reduct ion and On / Off f or other VR lenses.
144 i Choose how th e focus area f or autof ocus is sel ected. AF-Ar ea Mode e Auto- area The camera automatically detects the subject and selec ts the focus area.
145 i Focus L ock Focus lock can be used to change the composition after focusing on the subject in the center of the frame, allowing y ou to focus on a subject that will not be in the center of the final composi- tion.
146 i 2 Lock focus. With the shutter-r elease button pressed halfway, pr ess 1 ( A ) to lock both focus and exposure (an AE-L indi- cator will be displ ayed; 0 125). F ocus will remain locked while 1 ( A ) is pressed, ev en if you later remov e your finger from the shutter -release but- ton.
147 i Choose On to enable fac e-priorit y AF ( 0 25). If On is selected, the built-in AF-assist illu- minator will light to illuminate poorl y-lit subjects in still image, Smart Photo Selec- tor , or .
148 i Choose a flash control mode for optional flash units. Flash Control 1 TTL F lash out put is ad juste d automa tical ly in r esponse to shoot- ing conditions ( T TL flash control). 2 Manual Choose a flash level between Ful l and 1/32 ( 1 / 32 o f f u l l p o w e r ; f o r information on flash guide num- bers at full po wer , see page 162).
149 i Flash compensation alters flash output from the le vel suggested by the camera, changing the brightness of the main subject rel- ative to th e backgro und. Choose from values betwee n –3 EV (darker) and +1 EV (brigh ter) i n increments of 1 / 3 EV; in genera l, positive values make the subject brighter while negative values make it darker .
150 i.
151 g g The Setup Menu T o display the setup menu, press G and select the setup menu tab ( B ). The setup menu contains the following options: G button Reset setup options Reset setup menu options to default values ( 0 152). Forma t memory card Format the memory card ( 0 153).
152 g Sele ct Ye s to reset all setup menu options other than Vi d e o mode , Flicker reduction , Ti m e zo n e a nd d a te , and Language to default va lues ( 0 179).
153 g Select Ye s to format the memory card. Note that this permanently deletes all data on the card , including protected images ; b efo re proceeding, be sure t o copy important pic tures and other data to a computer ( 0 85). T o exit without formatting the memor y card, highlight No and press J .
154 g If On is selec ted, the message a t right will be displayed whenever the camer a is turned on. Highli ght Moni tor brightn ess or Vie w - finder brightness and pr ess 2 to display brightness option s for the selected dis- play .
155 g Highlight items and press 2 to selec t or deselect. I f Autof ocus/self-timer is selected, a beep will sound when the camera focuses and during self-timer and remote control photography; to mute the beep, r emove the check fr om this item.
156 g Choose how long the camera will remain active while waiting for a signal fr om the remote control ( 0 49). Choose shorter delays to reduce the drain on the batter y.
157 g Reduce flicker and banding in the displays and in movies while shooting under fluorescent or mercury-vapor lighting. Choose a frequency which matches that of the local AC power supply . When a photograph is taken or a movie is recorded, the camera names the file by adding one to the number of the previ- ous file ( 0 120).
158 g Change time zones, set the camera clock , choose the date display order , or turn daylight sa ving time on or off ( 0 19). Choose a language for camera messages and displays. Ti me Zone and Date Time zone Choose a time zone. The cam era clock is automatically set to the time in the new time zone.
159 g Photographs taken while On is selected contain information on camera orientation, a llowing th em to be rotated automatic ally during playback or when viewe d in ViewNX 2 or Captur e NX 2 (available separately; 0 163). The following orientations ar e recorded: Camera orientation is not rec orded when Off is selected.
160 g View inf ormation on the batter y currently inserted in the camera. View the curren t firmware version. Battery Info Charge remaining The current battery level, expre ssed as a percentage of a full charge. Battery age A five-level display showing b attery age.
161 n n Te c h n i c a l N o t e s Read this chapter for informat ion on compatible accessories, cleaning and storing the camera, and what to do if a n error mes- sag e is d isp layed or you e ncou nter p robl ems u sin g the came ra. At the time of writing, the following accessories were available for yo ur ca mera .
162 n Flash units SB-N5 ( 0 59): The SB-N5 has a Guide Number of 8.5/27.9 (m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO 200 i s 12/ 39.4). When mounted on the Nikon 1 V1, it suppor ts i- T TL and manual flash control ( 0 148). A Guide Number T o calculate the rang e of the flash at full po wer , divide the Guide Number by the aperture .
163 n Remote controls Wireless Remote Control ML -L3 ( 0 49 ): The ML -L3 uses a 3 V CR2025 bat tery . Pressing the battery- chamber latch to the right ( q ), insert a fingernail into the gap and open the batter y chamber ( w ). Ensure that the battery is in the correct orientation ( r ).
164 n Tri p o d adapters Trip od Adapter T A-N100 : Preve nts large lenses fr om coming into contact with the tripod head when the camera is mounted on a tripod.
165 n Approv ed Mem ory Card s The following car ds hav e been tested and approv ed for use in the camera. Cards with class 6 or faster write speeds ar e recom- mended for movie r ecording . Recording ma y end unexpectedly when cards with slower write speeds are used.
166 n Attaching a Pow er Connector and A C Adapter T urn the camera off before attaching an option al power connec- tor and AC adapter . 1 Ready the camera. Open the batt ery- chamber ( q ) and power connector ( w ) c overs . 2 Inser t the EP-5B power c onnector .
167 n 4 Connect the AC adapter . Connect the AC adapter power cable to the A C socket on AC adapter ( e ) and the EP-5B po wer cable to the DC socket ( r ). A P icon is displayed in the monitor when the camera is powered by the AC adapter and po wer connector .
168 n Stora ge If the camera will not be used for an extended pe riod, r emov e the battery and store it in a c ool, dry area with the terminal co ver in place.
169 n Do not drop : The product may malfunction if subjec ted to strong shocks or vibr ation. Keep dry : This product is no t waterpr oof , and may malfunction if immersed in wate r or exposed to hig h levels of humidity. Rusting of the internal mechanism can cause irrepar able damage.
170 n Cleaning : When cleaning the c amera body , use a bl ower t o gently remo ve dust and lint, then wipe gently with a soft, dr y cloth. Af ter using the cam- era at the beach or seasid e, wipe o ff any sand or salt usin g a cloth ligh tly dampened in pure water and then dry the camera thoroughly .
171 n Moiré : Moiré is an interference pattern created by the interaction of an image containing a regular , repeating grid, such as the pattern of weav e in cloth or windows in a building, with the camera image sensor g rid. In so m e c a s es , i t ma y a p p ea r in t he fo r m o f li n es .
172 n • A marked drop in the time a full y charged batter y retains it s charge when used at room temper ature indi cates that it requir es replac ement. Purchase a new EN-EL15 battery . • Charge the ba ttery before use . When taking photographs on impor- tant occasions, ready a spare EN-EL1 5 battery and keep it fully charged.
173 n The following table lists the setting s that can be adjusted in each mode . ❚❚ Still Image Mode/S mart Photo S elec tor Mode A vai lable Settings Still Image Mode Smart Photo Selector Mode E.
174 n 1 P Programmed auto is selected automatically when Electronic (Hi) is selected for Shutter type . 2 Not available when Elec tronic (Hi) is selected for Shutter type . 3 VR lenses only. 4 Not available if a frame rate of 10 f ps is chosen when Electronic (Hi ) is selected for Shutter type .
175 n ❚❚ Movie Mode/M otion Snapshot M ode Movie Mode Motion Snapshot Mode Exposure mode h P S A M h P S A M Shooting menu I m a g e q u a l i t y —————————— I m a g e s i z e .
176 n 1 HD movie selected in movie mod e. 2 Slow motion selected in movie mode. 3 VR lenses only. 4 Available only when an optional flash unit is used.
177 n Default settings are listed below . Shooting menu and other shooting options ar e reset with Reset shooting options ( 0 110), setup menu settings with Reset setup options ( 0 152).
178 n 1 V aries with lens. 2 The camer a focuses on th e subject in the cent er of the frame when 10 fps is selected for Electronic (Hi) or Slow motion is selec ted as the movie type. 3 F ace detection is not available when 10 fps is selected for Electronic (Hi) or Slow motion is sele cted as the movie type.
179 n ❚❚ Other S hooting Op tions * Not displayed when Auto -are a is selec ted for AF-a rea mode . ❚❚ Setup Me nu Defaults Opti on Default Foc u s a re a ( 0 14 4) Center * Flex ibl e p rog ram ( 0 113) O ff Autoex pos ure l ock ( 0 125) Off Fo cus lock ( 0 145) Off Self- time r ( 0 49) Off Foc u s m o d e ( 0 52) See page 52.
180 n The following table shows the number of pictures or amount of movie footage tha t can be stored on a 16 GB T oshiba R95 W80MB/s UHS-I SDHC card at different image quality, size , or movie settings. All figures are approximate; file size varies with the scene record ed.
181 n ❚❚ Slow Moti on Movies * Up to five secon ds of slow motion foot age can be recorded in a single clip. Playback length is about 13.2 ( 400 fps ) or 40 ( 1200 fps ) times the recorded length. ❚❚ Still Images (Smart Photo Selector Mode) 1 T otal si ze of all five images recorded with each shot.
182 n If the camera fails to function as expec ted, check this list of com- mon probl ems befo re consulti ng your r etailer or Nikon r epre- sentativ e. Display Tr o u b l e s h o o t i n g The display s are off : • The camera is off ( 0 18) or the battery is exhausted ( 0 12, 21).
183 n Shooting (All Exposure Modes) The camera takes t ime to turn on : Delete files or format the memor y card. The shutter-release is disabled : • The batter y is exhausted ( 0 12, 2 1). • The memory card is locked ( 0 15) or full ( 0 15, 21). • The camera is not in focus ( 0 25).
184 n Shooting (P , S, A, and M Modes) Movies Flicker or banding appears in movies or in the displays : Choose a Fl icke r re du c- tion setting that match es the local AC powe r supply ( 0 157).
185 n Playback Miscellaneous NEF (RAW) images are not displayed : The camera displays only the JPEG copi es of NEF (RA W ) + JPEG fine images ( 0 119). “ T all ” (portrait ) orientation photos are displayed in “ wide” (landscape) orientation : • Select On for Rotate tall ( 0 103).
186 n This section lists the error messages that appear in th e display . Error Messages Message Sol utio n 0 Rotate the zoom ring to extend the lens. A lens with a retr actable lens barr el button is attached with the lens barrel retracted. Press the retractable lens barrel button and rotate the zoom ring to exte nd th e lens.
187 n Memory card is fu ll. • Y ou may be able to record additional images if you reduce image quality or size. 119 • Delete unwan ted images. 75 • Inser t another memory card. 15, 165 This memory card cannot be used. Card may be damaged; insert a different card .
188 n Hi • Low er ISO sensitivity. 131 • Choose a faster shutter speed or smaller aper ture (high er f-number). 114, 115, 116 Lo • Raise ISO sensitivit y . 131 • Use an optional flash unit. 59 • Choose a slower shutter speed or larger aperture (low er f-number).
189 n * See the printer manual for more information. An error has occurred in the internal circuitry. Contact a Nikon -au thor iz ed service center . Contact a Nikon-authorized ser vice repres entative. — The ca mera’ s inte rnal temperature is high.
190 n Nik on 1 V1 Digital C amer a Specifications Typ e Typ e Digital camera with interchangeable lenses Lens mount Nikon 1 mo unt Effecti ve angle of view Ap prox. 2.7× lens focal length (Nikon CX format) Effective pixels 10.1 million Image sensor Image sensor 13.
191 n Elec tronic v iewfinde r Electronic viewfinder 0.47-in., approx. 1440k-dot color TFT LCD view- finder with diopter control and brightness adjust - ment Fram e cove rage Appr ox.
192 n Exposure Metering T TL metering using ima ge sensor Metering method • Matr ix • Center-we ighted: Met ers 4 .5 mm c ir cl e i n ce nt er of frame • Spot : Meter s 2 mm circle centered on s.
193 n Foc u s Foc u s ar e a • Single -point AF : 135 focus areas • Auto-area AF : 41 focus areas Foc u s lo c k F ocus can be locked by pr essing shutter -release button halfway (single AF) or by.
194 n Movie Frame size (pix els)/ record ing rat e HD movies • 1,920 × 1, 080/60i (59.94 fields/s * ) • 1,920 × 1, 080/30p (29.97 fps) • 1,280 × 72 0/60p (59.94 fps) Slo w-m otio n m ovi es • 640 × 240/400 fps (plays at 30p/29.97 fps) • 320 × 120/1,200 fps (plays at 30p/29.
195 n • Unless other wise stated, all figures are for a camera with a fully- charged bat- tery operating at an ambient temperature of 20 ° C (68 °F). • Nikon rese rves the righ t to chan ge the speci ficatio ns of the h ardwa re and software described in this manual at any time and without prior notice.
196 n MH-25 batt ery charger Rated input AC 100 – 240 V , 50/60 Hz, 0.12 – 0.23 A Rated output DC 8.4 V/1.2 A Supported batteries Nikon EN-EL15 rechargeable Li-ion batteries Charging time Appro x.
197 n Specifica tions subj ect to change withou t notic e. Nikon will not be hel d liable for damages that may result from any mistakes that this manual may contain. 1 NIKKOR VR 10 – 30 mm f/3.5 – 5.6 Typ e 1 mount lens Focal length 10 – 30 mm Maximum aperture f/3.
198 n ❚❚ The 1 NIKK OR VR 10 – 30 mm f/3.5 – 5.6 1 NIKKOR lenses ar e exclusiv ely for Nikon 1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7 × longer . They sup- port nor mal and active vibration reducti on and vibration reduc- tion off ( 0 143).
199 n A Lens Care • When using an optional lens hood, do not pick up or hold the lens or camera using only the hood. • Keep the CPU contacts clean.
200 n ❚❚ Suppor ted St andards • DCF Versi on 2.0 : The Desi gn Rule f or Camera F ile Systems (DC F) is a standar d widely us ed in the digi tal camera indu stry to ensure compatibility among different makes of camera.
201 n Battery Life The number of shots that can be taken with fully- charged batter- ies varies with the condition of the battery, t emperature, such factors as the use of GPS devices or oth er accessories, the inter- val between shots, and the length of time menus are displayed .
202 n Symbols C (Still image mode) ................... .... 23 y (Smart Photo Selector mode ) . 31 1 (Movie mode) ............................ .... 37 z (Motion Snapshot mode) .......... 45 h (Scene auto selector) .......23, 111 c (Portrait) .........
203 n Body cap ................................... 1, 2, 163 Border ............. ................................. ...... 98 Bounce lighting ................................. 62 Brightness ................... ...................... 1 34 Buffering ...
204 n Focu s ............................... ..............52, 144 Focu s area ........................... ........25, 144 Focu s lock ........................................ ..145 Focu s mode ........................ ................. 52 Focu sing the viewfinder .
205 n PictBridge ............. ...................... 93, 200 Picture Control ....................... 132, 136 Playback ................ ......................... 28, 69 Playback menu ................................ 101 Playback zoom ................
206 n Thumbnail playback ....... ................. 72 Time ............................. 19, 49, 117, 158 Time stamp .......................................... 98 Time zone . ................................. ........158 Time zone and date ...........
.
No reproduction in any form of this manual, in whole or in part (except for brief quotati on in critical articles or reviews), may be made withou t written author ization from NIKON CORPORATION.
An important point after buying a device Nikon V1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nikon V1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nikon V1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nikon V1 you will learn all the available features of the product, as well as information on its operation. The information that you get Nikon V1 will certainly help you make a decision on the purchase.
If you already are a holder of Nikon V1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nikon V1.
However, one of the most important roles played by the user manual is to help in solving problems with Nikon V1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nikon V1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
