Instruction/ maintenance manual of the product SB 22 Nikon
Go to page of 2
E Forew or d Speedlight par ts Preparation TTL Auto Flash t Mode Checking the Correct Exposure Non-TTL Auto Flash ˙ Mode Autofocus Flash Operation in Dim Light 1 Set the SB-22s’s POWER switch to OFF, then slide down the battery chamber lid in the direction of the arrow and lift it off.
Bounce Flash Close-Up Flash Setting the Built-In Wide Flash Adapter Multiple Flash Operation Notes on Batteries In TTL Auto Flash TTL mode, when shooting subjects such as flowers or insects closer than 0.6m (2 ft), use your SB-22s off camera and utilize its built-in wide flash adapter to take close-up pictures with flash.
An important point after buying a device Nikon SB 22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nikon SB 22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nikon SB 22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nikon SB 22 you will learn all the available features of the product, as well as information on its operation. The information that you get Nikon SB 22 will certainly help you make a decision on the purchase.
If you already are a holder of Nikon SB 22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nikon SB 22.
However, one of the most important roles played by the user manual is to help in solving problems with Nikon SB 22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nikon SB 22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center