Instruction/ maintenance manual of the product 9090 Associated Equipment
Go to page of 6
1 A SSOCIA TED BATTERY CHARGER OPERATOR'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS. This manual contains important safety and oper ating instructions for models 9006, 9010, 9014, 9050, 9060, 9070 & 9090. You may need to refer to these instructions at a later date.
2 15. CHARGER LOCATION a. Locate charger as far away from battery as dc cables permit. b. Never place charger directly above battery being charged; gases from battery w ill corrode and damage charger. c. Never allow battery acid to drip on charger when reading gravity or filling battery, d.
3 20. OPERATING INSTRUCTIONS Before using review all safety and connection directions before using charger. Failure to do so can damage battery and cause serious injury or death.
4 FEAT URES: All automatic chargers come with an Automatic On-off circ uit (12V settings only and a State of charge / Amp-meter. 9014 — SELECT SETTING switch with the following select ions; OFF, 10A.
5 3. ! Battery "eye" does not indicate a full charge even though charge complete indicator light is on. The battery is fully charged when the charge complete indicator light is on. Stratifi cation of the electrolyte may prevent the battery ey e from immediately indicating a full charge.
6.
An important point after buying a device Associated Equipment 9090 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Associated Equipment 9090 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Associated Equipment 9090 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Associated Equipment 9090 you will learn all the available features of the product, as well as information on its operation. The information that you get Associated Equipment 9090 will certainly help you make a decision on the purchase.
If you already are a holder of Associated Equipment 9090, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Associated Equipment 9090.
However, one of the most important roles played by the user manual is to help in solving problems with Associated Equipment 9090. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Associated Equipment 9090 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
