Instruction/ maintenance manual of the product D2HS Nikon
Go to page of 271
En The Nikon Guide to Digital Photography with the DIGIT AL CAMERA.
The documentation for this product includes the manuals listed below . Please be sure to r ead all instructions thoroughly to get the most fr om your cam era.
i Then read “Overview” and “Getting to Know the Camera” to acquaint your self with the con ven tions used in this man u al and the names of cam era parts, then set up the cam era as de scribed in “First Steps.” How to Read This Manual First, be aware of the warnings, cautions, and notices on pages ii–vii.
ii WA R N I N G S Do not look at the sun through the view- fi nder V iewing the sun or other strong light source thr ough the viewfi nder could cause per ma nent visual im pair ment.
iii • Do not immerse in or expose to wa ter . • Batteries are prone to leakage when fully discharged. T o avoid damage to the prod uct, be sure to remove batteries when no charge re mains. • Discontinue use immediately should you notice any changes in the batteries, such as dis col or a tion or de for ma tion.
iv Do not drop The product may malfunction if sub ject ed to strong shocks or vi bra tion. K eep dry This product is not waterpr oof, and may mal func tion if im mersed in wa ter or ex posed to high levels of hu mid i ty . Rust ing of the in ter nal mech a nism can cause ir rep a ra ble dam age.
v • Do not store the camera with naph tha or camphor moth balls, close to equip ment that pro duc es strong mag net ic fi elds, or in areas subject to extr emes of tem per a ture, for ex am ple near a space heater or in a closed ve hi cle on a hot day .
vi Notice for customers in the U.S.A. Federal Communications Commission (FCC) Radio Fr equency Interference Statement D2Hs T ested T o Comply W ith FCC Standards FOR HOME OR OFFICE USE Notices CAUTION.
vii Notice for customers in Canada CAUTION This class B digital apparatus meets all re- quirements of the Canadian Interfer ence Causing Equipment Regulations. A TTENTION Cet appareil numérique de la classe B r es- pecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
viii T able of Contents For Y our Safety ................................................................................................ ii Caring for the Camera and Battery ................................................................ iv Notices.
ix Autofocus ........................................................................................................ 74 AF-Area Mode .............................................................................................. 74 Focus Lock ........
x Menu Guide 145 The Playback Menu ......................................................................................... 146 Delete .............................................................................................................. 146 Playback Folder .
xi V oice Memo Overwrite ..................................................................................... 207 V oice Memo Button ......................................................................................... 207 Audio Output ..........
xii.
1 This chapter is divided into the following sec- tions: Overview Read this section for a description of how this man u al is organized and for an ex pla na tion of the symbols and conventions used. Getting to Know the Camera Bookmark this section and refer to it for infor - mation on the names and func tions of camera parts.
2 Introduction—Overview This icon marks settings that can be fi ne-tuned from the Custom Set- tings menu. This icon marks settings that can be adjusted using camera menus.
3 Introduction—Getting to Know the Camera T ake a few moments to familiarize yourself with camera controls and dis- plays. Y ou may fi nd it helpful to bookmark this section and r efer to it as you read thr ough the rest of the manual.
4 Introduction—Getting to Know the Camera Camera Body (continued) Ambient light sensor: 52, 57 Self-timer lamp: 120 Flash sync terminal: 114 10-pin remote terminal: 239 Audio / video (A / V) connect.
5 Introduction—Getting to Know the Camera Eyepiece shutter lever: 31, 120 Viewfi nder eyepiece: 31, 236 Delete ( ) button: 35, 136 Format ( ) button: 23 Playback ( ) button: 128 Monitor: 28, 203, 2.
6 Introduction—Getting to Know the Camera The T op Control Panel 1 2 3 4 5 6 7 14 15 16 17 8 23 21 19 9 10 11 12 13 22 18 20.
7 Introduction—Getting to Know the Camera 1 Shutter speed .......................... 83–92 Exposure compensation value ....... 95 Number of shots in bracketing sequence ...................................... 96 Number of intervals for interval timer photography .
8 Introduction—Getting to Know the Camera The Rear Control Panel 1 3 2 4 5 6 7 9 8 13 10 11 12.
9 Introduction—Getting to Know the Camera 1 Custom settings bank ................. 171 2 “Remaining” indicator .................. 28 3 Shooting menu settings bank ..... 159 4 Sensitivity (ISO) indicator ............... 50 Auto sensitivity indicator .
10 Introduction—Getting to Know the Camera The Viewfi nder Display 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 23 2 1.
11 Introduction—Getting to Know the Camera 1 8-mm (0.31˝) refer ence circle for center -weighted metering ............. 82 2 Focus brackets (focus ar eas) .......... 72 Spot metering targets ................... 82 3 Focus indicator ................
12 Introduction—Getting to Know the Camera The Command Dials The main- and sub-command dials are used alone or in combination with other controls to adjust a variety of settings.
13 Introduction—Getting to Know the Camera Exposure Choose an aperture (exposur e mode A or M ; 88, 90). Choose the exposure mode ( 83–91). Choose a shutter speed (exposure mode S or M ; 86, 90). Choose a com bi na tion of aperture and shutter speed (exposure mode P ; 85).
14 Introduction—Getting to Know the Camera The Multi Selector The multi selector is used for the following operations: • Menu navigation : Cancel and return to previous menu ( 40). • Shooting :Select focus area to left of current focus ar ea ( 72).
15 Introduction—First Steps Before using the camera for the fi rst time, complete the following steps: First Steps Getting the Camera Ready for Use Step 1 Attach the Camer a Strap .
16 Introduction—First Steps Step 2—Insert the Battery The D2Hs is powered by a r echargeable Nikon EN-EL4 Li-ion battery (provided). 2 .1 Charge the battery The EN-EL4 is not fully charged at ship ment.
17 Introduction—First Steps Step 3—Basic Setup Choose a language and set the time and date as described below . T urn camera on. 3 .1 Display menus. * 3 .2 Display SET UP menu. 3 .3 Position cursor in SET UP menu. 3 .4 Highlight Language . 3 .5 Display options.
18 Introduction—First Steps Highlight World Time . 3 .9 Display options. 3 .10 Highlight Time zone . 3 .11 Display map of world time zones. 3 .12 Select local time zone. † 3 .13 Return to WORLD TIME menu. ‡ 3 .14 † UTC fi eld shows time difference between selected time zone and Coor dinated Uni- versal Time (UTC), in hours.
19 Introduction—First Steps Edit Y ear , M onth, D ay , H our , M inute, and S econd. Press multi selector left or right to select item, up or down to change. Press button to set date and time and return to to WORLD TIME menu. 3 .17 Highlight Date format .
20 Introduction—First Steps 4 .1 T urn the camera off Tu rn the camera off befor e attaching or re mov ing lenses. 4 .2 Attach a lens Keep ing the mounting mark on the lens aligned with the mounting mark on the cam era body , position the lens in the cam- era’ s bayonet mount.
21 Introduction—First Steps 4 Protect th e C amera fr om Dir t and D ust Any dust, dirt, or other foreign matter inside your cam era could show up as specks or blotches in your pho to graphs or the viewfi nder display . When no lens is in place, keep the lens mount covered with the supplied BF-1A body cap .
22 Introduction—First Steps No Memory Card If no memory card is inserted in the camera when a charged EN-EL4 battery is inserted or the camera is pow ered by an AC adapt er , will appear in the ex po sure-count displays in the contr ol panel and view- fi nder .
23 Introduction—First Steps 5 .4 Format the mem o ry card Memory cards must be for mat ted be fore fi rst use. Formatting Memory Cards Formatting memory cards permanently deletes any data they may contain. Be sure to copy any photographs and other data you wish to keep to a com put er be fore pr oceeding ( 223–225).
24 Introduction—First Steps Memory Cards • Memory cards may be hot after use. Observe due caution when r emoving memory cards fr om the camera. • Format memory cards before fi rst use. •T ur n the pow er off before in sert ing or re mov ing mem o ry cards.
25 This chapter takes you step-by-step through the process of taking your fi rst photographs and play ing them back. Basic Photography This section describes how to use autofocus and programmed auto autoexposur e for sim ple, “point-and-shoot” pho tog ra phy that will pro- duce optimal re sults in most situations.
26 T utorial—Basic Photography Basic Photography T aking Y our First Photographs There ar e six basic steps to taking photographs: Step 1 Ready the Camera .......................................................................... 27–28 To learn how to restore settings to their default values, see: • T aking Photographs: T wo-Button Reset .
27 T utorial—Basic Photography Step 1—Ready the Camera Before taking photographs, r eady the camera as described below . 1 .1 T urn the cam era on The control panel will turn on and the dis- play in the viewfi nder will light. 1 .2 Check the battery level Check the battery level in the viewfi nder or top control panel.
28 T utorial—Basic Photography 1 .3 Check the num ber of exposures re main ing The exposure-count display in the top con- trol pan el shows the num ber of pho to graphs that can be taken at current set tings. When this number reaches zer o, the icon will fl ash in the top control panel and a fl ashing icon will appear in the viewfi nder .
29 T utorial—Basic Photography Step 2—Adjust Camera Settings This tutorial describes how to take photographs at the default settings listed in the table below , using a type G or D lens. Information on when and how to change settings from their default values is pr ovided in “T aking Photo- graphs” ( 37).
30 T utorial—Basic Photography 2 .2 Choose single-area AF ( 74) Rotate the AF-area mode se lec tor until it clicks into place point ing to (sin gle-area AF). At this setting, the user can choose from eleven focus ar eas. Pressing the shut- ter -release button halfway locks focus at the distance to the subject in the selected focus area.
31 T utorial—Basic Photography Step 3—Frame a Photograph To prevent blurr ed photographs caused by unsteady hands (camera shake), hold the camera steadily in both hands, with your elbows propped lightly against your torso for support. Hold the handgrip in your right hand and cradle the cam era body or lens with your left.
32 T utorial—Basic Photography Step 4—Focus In sin gle-servo AF , the camera focuses on the sub ject in the se lect ed focus area when the shut ter -re lease but ton is pressed halfway . After cen ter ing the fo cus brack ets on your subject, press the shut ter -re lease button halfway and check focus in the viewfi nder .
33 T utorial—Basic Photography Step 5—Check Exposure In exposure mode P (programmed auto), the cam- era automatically sets shutter speed and aperture when the shutter -release button is pressed half- way . Before shooting, check the shut ter -speed and aperture in di ca tors in the viewfi nder .
34 T utorial—Basic Photography While the photograph is being recor ded to the mem o ry card, the access lamp next to the car d slot cov er will light. Do not eject the mem o ry card, turn the camera off, or remove or dis- con nect the power source until the lamp has gone out.
35 T utorial—Basic Playback Basic Playback Viewing Photographs To play photographs back, press the button. The most r ecent pho to graph will be dis played in the mon i tor . Viewing Additional Photographs To page thr ough photographs in the order r ecorded, pr ess the multi selector down.
36.
37 “T utorial: Basic Photography” described the ba- sic order of operations for taking photographs at the most commonly-used settings. This chapter explains how and when to adjust camera set tings for differ ent shooting conditions.
38 T aking Photographs Flash Photography ................................................................... 104–114 Image Quality and Size ............................................................ 43–49 Image Adjustment .......................
39 T aking Photographs—Using Camera Menus The next four sections involve settings that can be accessed via the camera menus. T o view the menus, turn the camera on and press the button. Choosing a Menu There ar e fi ve main menus: the playback menu, the shooting menu, the Custom Settings menu, the setup menu, and Recent Settings.
40 T aking Photographs—Using Camera Menus • T o return to the previous menu without making a selection, press the multi se lec tor to the left. • The selection for some options is made from a sub-menu. Repeat steps 3 and 4 to make a selection from a sub-menu.
41 T aking Photographs—Choosing a Shooting Mode *A verage frame rate with continuous- servo AF , manual or shutter -priority auto ex po sure, a shutter speed of ½ 50 s or faster , and memory re main ing in memory buffer .
42 T aking Photographs—Choosing a Shooting Mode To choose a shooting mode, pr ess the mode dial lock release and turn the mode dial to the desired setting. The Memory Buffer The camera is equipped with a memory buffer for tem po rary storage, allowing shoot- ing to continue while photographs are being saved to the memory car d.
43 T aking Photographs—Image Quality and Size Image Quality and Size Making Effective Use of Memory T ogether , image quality and size determine how much space each pho to - graph occupies on the memory card.
44 T aking Photographs—Image Quality and Size Image quality can be set using the Image quality option in the shooting menu or by pressing the QU AL button and rotating the main command dial. Tw o options are available for controlling compr ession: Raw compression for NEF (RA W) images ( 46) and JPEG compression for JPEG images ( 45).
45 T aking Photographs—Image Quality and Size The JPEG Compression Menu The JPEG compression menu of fers the following options for JPEG images: Option Description Size priority (default) Optimal quality Optimal image quality . File size varies with scene recorded.
46 T aking Photographs—Image Quality and Size The Raw Compression Menu The following options are available for NEF (RA W) images: Option Description NEF (Raw) NEF images are not compr essed. Comp. NEF (Raw) (default) NEF images are compr essed, reducing fi le size by about 40–50% per cent with almost no effect on image quality .
47 T aking Photographs—Image Quality and Size 2 High light the de sir ed op tion and press the multi se lec tor to the right. The shooting menu will be displayed. Image size can be set using the Image size option in the shooting menu or by pressing the QU AL button and rotating the sub-command dial.
48 T aking Photographs—Image Quality and Size Memory Card Cap acit y and I mage Q ualit y/ Size The following table shows the approximate number of pictur es that can be stored on a 512 MB card at differ ent image quality and size settings. Image quality Image size File size (MB) 1 No.
49 T aking Photographs—Image Quality and Size N umber of Expo su res Rema ining The number of exposures r emaining shown in the ex po sure count dis plays in the con trol panel and viewfi nder is only an ap prox i ma tion.
50 T aking Photographs—Sensitivity (ISO Equivalency) “Sensitivity” is the digital equivalent of fi lm speed. The higher the sensitivity , the less light needed to make an exposure, allowing higher shutter speeds or smaller apertures.
51 T aking Photographs—Sensitivity (ISO Equivalency) HI -1 / H I - 2 The higher the sensitivity , the more likely pictur es are to be subject to “noise” in the form of randomly-spaced, brightly-colored pixels. Pho tos taken at HI-1 or HI-2 will likely con tain ap pre cia ble amounts of noise.
52 T aking Photographs—White Balance White Balance Keeping Colors T rue The color of light refl ected from an object varies with the color of the light source.
53 T aking Photographs—White Balance T aking Photographs—White Balance White balance can be set using the White Balance option in the shooting menu or by pressing the WB button and r otating the main command dial. The White Balance Menu 1 Highlight White Balance in the shooting menu ( 158) and press the multi selector to the right.
54 T aking Photographs—White Balance 2 Press the multi selector up or down to choose the desired value and pr ess the multi selector to the right. The shooting menu will be dis- played. Fine-T uning White Balance At settings other than ( Choose color temp.
55 T aking Photographs—White Balance T aking Photographs—White Balance Fine -T uning and Co lor T e mp erature Approximate color -temperatures for settings other than A (auto) are given below (val.
56 T aking Photographs—White Balance Choosing a Color T emperature Choose a setting of ( Choose color temp. ) to select the color temperatur e from thirty-one pr edetermined values ranging from 2,500 K to 10,000 K in increments of r oughly 10 mired (note that the desir ed results will not be ob- tained with fl ash or fl uorescent lighting).
57 T aking Photographs—White Balance T aking Photographs—White Balance Preset White Balance Preset white balance is used to r ecord and r ecall custom white balance set- tings for shooting under mixed lighting or to compensate for light sources with a strong color cast.
58 T aking Photographs—White Balance Measuring a V alue for White Balance White balance can be measured with r eference to a neutral gray object or by measuring the color of the light source. The new value for white balance is automatically stored in pr eset d-0.
59 T aking Photographs—White Balance T aking Photographs—White Balance 2 Release the WB button briefl y and then press the button until the icon in the rear control panel and viewfi nder sidebar start to fl ash. A blinking will also appear in the top control panel and viewfi nder frame-count displays.
60 T aking Photographs—White Balance 4 If the camera was able to measure a value for white balance, will fl ash for about thr ee seconds in the control panels, while the viewfi nder will show a fl ashing .
61 T aking Photographs—White Balance T aking Photographs—White Balance Selecting a White Balance Preset To set white balance to a pr eset value: 1 Highlight White bal. preset in the white bal- ance menu ( 52) and press the multi selector to the right.
62 T aking Photographs—White Balance 5 Press the multi selector to the right to set white balance to the value stored in the selected preset and r eturn to the shooting menu.
63 T aking Photographs—White Balance T aking Photographs—White Balance Copying White Balance from a Photograph (d-1 – d-4 Only) To copy a value for white balance from a photo- graph on the memor.
64 T aking Photographs—White Balance Copying White Balance from d-0 to Presets d-1 – d-4 To copy a measured value for white balance from d-0 to any of the other pr esets (d-1 – d-4), highlight the destination preset in the thumbnail display and press the center of the multi selector as described in steps 1–3 on page 61.
65 T aking Photographs—Image Adjustment T aking Photographs—Image Adjustment Image Adjustment Shooting Menu Settings This section describes settings that can only be adjusted from the shooting menu ( 158).
66 T aking Photographs—Image Adjustment Adjusting Contrast: To ne Compensation As photographs are saved to the memory car d, they are pr ocessed to adjust the distribution of tones in the image, en hanc ing con trast.
67 T aking Photographs—Image Adjustment T aking Photographs—Image Adjustment Suiting Colors to a Workfl ow: Color Mode Color mode determines the gamut of colors available for color repr oduction. Choose a color mode according to how pho to graphs will be pro cessed on leaving the cam era.
68 T aking Photographs—Image Adjustment Color Mode Modes I and III are r ecommended when taking photographs that will be printed with- out modifi cation or viewed in applications that do not suppor.
69 T aking Photographs—Image Adjustment T aking Photographs—Image Adjustment Controlling Color: Hue Adjustment Hue can be adjusted in the range about –9 ° to +9 ° in in cre ments of 3 °.
70 T aking Photographs—Focus Focus Controlling How the Camera Focuses This section describes the options that control how your camera focuses: fo cus mode, focus-area selection, and AF-ar ea mode. Focus Mode Focus mode is controlled by the focus mode se lec tor on the front of the camera.
71 T aking Photographs—Focus Predic tiv e Focus T racking If the camera autofocus system detects that the subject is moving when the shutter - r elease button is pr essed halfway , it will au to mat i cal ly ini tiate pre dic tive focus track ing.
72 T aking Photographs—Focus Focus Area Selection The D2Hs offers a choice of eleven focus ar eas that together cover a wide area of the frame. The focus ar ea can be selected manually , allowing ph.
73 T aking Photographs—Focus Focus Area Selec tio n for Por tra it (Tall) O rien tati on Phot ograp hs If the shutter -release button for vertical shooting is un- locked, the focus area can also be selected by pr essing the AF-ON button for vertical shooting and rotating the sub-command dial for vertical shooting.
74 T aking Photographs—Focus Autofocus When the focus mode selector is set to S (single-servo autofocus) or C (con- tin u ous-servo auto fo cus), the cam era fo cus es au to mat i cal ly when the shut- ter -re lease but ton is pressed half way .
75 T aking Photographs—Focus Description Mode User selects focus area manually , but camera uses information from multiple focus ar eas to de ter mine focus. If sub ject leaves selected focus area even briefl y , cam era will focus based on in for ma tion from oth er focus areas (focus area selected in view- fi nd er does not change).
76 T aking Photographs—Focus Focus-ar ea selection AF-area mode Contr ol-panel display Summar y of Autofocu s Opt ions Focus mode Manual Single-area AF AF-S Manual Dynamic-area AF Manual (camera foc.
77 T aking Photographs—Focus Camera focuses on subject in selected focus frame. Focus will remain locked while shutter -release button is pressed half way . Use with static sub jects when time is avail able to com pose pho to. Camera focuses on subject in selected focus frame.
78 T aking Photographs—Focus Focus Lock Focus lock can be used to change the com po si tion after focusing, making it possible to focus on a subject that will not be in a focus area in the fi nal composition. It can also be used when the autofocus system is unable to focus ( 80).
79 T aking Photographs—Focus 3 Re com pose the pho to graph and shoot. In single-ser vo AF , focus will remain locked be tween shots as long as the shutter -re lease button is kept pressed half way , al low ing sev er al pho to graphs in suc ces sion to be taken at the same focus setting.
80 T aking Photographs—Focus Getting Good Results with Autofocus Autofocus does not perform well under the conditions listed below . If the camera is unable to focus using autofocus, use manual focus 81) or use focus lock ( 78) to focus on another subject at the same distance and then recompose the photograph.
81 T aking Photographs—Focus Manual Focus Manual focus is available for lenses that do not sup port autofocus (non-AF Nikkor lens es) or when the autofocus does not produce the desir ed re sults ( 80).
82 T aking Photographs—Exposure Metering The metering method determines how the cam era sets exposure: Exposure Controlling How the Camera Sets Exposure b6 — C ent er W eight ( 18 3) This option controls the size of the ar ea assigned the greatest weight in center - weighted metering.
83 T aking Photographs—Exposure Exposure Mode Exposure mode determines how the camera sets shutter speed and apertur e when adjusting exposure. Four modes ar e available: programmed auto ( P ), shutter -priority auto ( S ), aperture-priority auto ( A ), and manual ( M ).
84 T aking Photographs—Exposure P: Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture ac cord ing to a built-in program (see below) for optimal exposure in most sit u a tions.
85 T aking Photographs—Exposure Flexib le Program In programmed auto, dif ferent com bi na tions of shutter speed and ap er ture can be selected by rotating the main com mand dial (“fl exible program”). All combinations pro duce the same ex po sure.
86 T aking Photographs—Exposure S: Shutter -Priority Auto In shutter -priority auto, you choose the shutter speed while the camera au to mat i cal ly selects the aperture that will pr oduce the optimal exposure. Shutter speed can be set to values between 30 s and 1 / 8,000 s.
87 T aking Photographs—Exposure Non - CPU Lenses Exposure mode A (apertur e-priority auto) is automatically selected when a non-CPU lens is attached. The exposure mode indicator ( S ) in the top contr ol panel will blink and A will be displayed in the viewfi nder .
88 T aking Photographs—Exposure A: Aperture-Priority Auto In aperture-priority auto, you choose the apertur e while the camera au to - mat i cal ly selects the shut ter speed that will produce the optimal exposure. Small apertures (high f/-numbers) incr ease depth of fi eld, bringing both the main subject and back ground into focus.
89 T aking Photographs—Exposure Non - CPU Lenses If the maximum aperture of the lens has been specifi ed using the Non-CPU lens data item in shooting menu ( 126) when a non-CPU lens is attached, the current f/-number will be displayed in the viewfi nder and top control panel, r ounded to the nearest full stop.
90 T aking Photographs—Exposure M: Manual In manual exposure mode, you contr ol both shutter speed and aperture. Shut ter speed can be set to values between 30 s and 1 / 8,000 s, or the shutter can be held open indefi nitely for a long time-exposure ( ).
91 T aking Photographs—Exposure Non - CPU Lenses If the maximum aperture of the lens has been speci- fi ed using the Non-CPU lens data item in shooting menu ( 121) when a non-CPU lens is attached, the current f/-number will be displayed in the view- fi nder and top control panel, rounded to the near - est full stop.
92 T aking Photographs—Exposure Shutter -Speed and Aperture Lock The button can be used to lock shutter speed at the value selected in shut- ter -priority auto or manual exposure mode, or to lock aperture at the value selected in aperture-priority auto and manual exposur e modes.
93 T aking Photographs—Exposure Autoexposure Lock When center -weighted metering is used, an area in the center of the frame is assigned the greatest weight when determining exposur e. Similarly , when spot metering is used, exposure is based upon lighting conditions in the se- lected focus area.
94 T aking Photographs—Exposure 3 Keeping the AE-L/AF-L but ton pressed, re com pose the pho to graph and shoot. Metere d Ar ea In spot metering, exposure will be locked at the value meter ed in a 3-mm (0.12˝) circle centered on the selected focus ar ea.
95 T aking Photographs—Exposure Exposure Compensation To obtain the desired results with certain subject compositions, it may be nec es sary to use ex po sure compensation to alter exposure fr om the val ue sug gest ed by the cam era.
96 T aking Photographs—Exposure Bracketing The D2Hs offers thr ee types of bracketing: ex po sure bracketing, fl ash brack- et ing, and white bal ance bracketing.
97 T aking Photographs—Exposure 3 Press ing the button, rotate the sub-com mand dial to choose the exposure incr ement ( 98–100). 4 Com pose a photograph, focus, and shoot. The cam era will vary ex- po sure and/or fl ash level shot-by-shot according to the brack et ing pro- gram se lect ed.
98 T aking Photographs—Exposure The bracketing programs available depend on the option selected for Cus- tom Setting b3 ( EV step ; 181). 1/3 Step Selected for EV Step No . of shots Control panel display Exposure increment 3 + 1 / 3 EV +0.3, 0, +0.7 3 + 2 / 3 EV +0.
99 T aking Photographs—Exposure 3 +½ EV +0.5, 0, +1.0 3 –½ EV –0.5, –1.0, 0 2 +½ EV 0, +0.5 2 –½ EV 0, –0.5 3 ±½ EV 0, –0.5, +0.5 5 ±½ EV 0, –1.0, –0.5, +0.5, +1.0 9 ±½ EV 0, –2.0, –1.5, –1.0, –0.5, +0.5, +1.0, +1.5, +2.
100 T aking Photographs—Exposure Re sum ing Exposur e or Fl ash Bra cketi ng If the mem o ry card fi lls before all shots in the sequence have been taken, shooting can be resumed fr om the next shot in the sequence after the memory card has been re placed or shots have been deleted to make room on the memory card.
101 T aking Photographs—Exposure White Balance Bracketing 1 Choose WB bracketing for Cus tom Set ting e5 ( Auto BKT set ; 192). 2 Press ing the button, rotate the main com mand dial to choose the number of shots in the bracketing sequence ( 103). At settings other than zero, a icon and bracketing indicator will appear in the top control panel.
102 T aking Photographs—Exposure 4 Com pose a photograph, focus, and shoot. Each shot will be pro cessed to create the num ber of cop ies spec i fi ed in the brack et ing program, and each copy will have a dif fer ent white bal ance.
103 T aking Photographs—Exposure The number of shots, white balance (WB) increment, and bracketing or der for each of the possible white-balance bracketing programs is shown below .
104 T aking Photographs—Flash Photography The D2Hs supports fl ash photography when an optional Speedlight is mounted on the camera’ s accessory shoe. A fl ash can be used not only when natural lighting is inadequate, but also to fi ll in shadows, illuminate back-lit subjects, and even to add a catch light to the eyes of a portrait subject.
105 T aking Photographs—Flash Photography TTL Flash Control TTL fl ash control is available only with optional SB-series 800, 600, 80DX, 28DX, and 50DX Speedlights.
106 T aking Photographs—Flash Photography SB-80DX, SB-28DX, SB-50DX: D-TTL Flash Control The type of fl ash control used with the SB-80DX, SB-28DX, and SB-50DX depends on the lens attached: Descrip.
107 T aking Photographs—Flash Photography Compatible Speedlights The following Speedlights support TTL fl ash control: 1 Functions as remote fl ash only . 2 Standard i-TTL for Digital SLR is used with spot meter- ing or when selected with Speedlight.
108 T aking Photographs—Flash Photography The following Speedlights can be used in non-TTL auto and manual modes. If they are set to TTL, the camera shutter -release button will lock and no pho to graphs can be taken.
109 T aking Photographs—Flash Photography Notes on Op tiona l Spe edlig hts Refer to the Speedlight manual for detailed instructions. If the Speedlight supports i-TTL or D-TTL fl ash control, refer to the entry for cameras that support the Cr eative Lighting System (CLS) or for digital SLR cameras in the table of camera types.
110 T aking Photographs—Flash Photography Flash Sync Modes The D2Hs supports the following fl ash sync modes: Description Flash sync mode This mode is recommended for most situations.
111 T aking Photographs—Flash Photography To choose the fl ash sync mode, press the but- ton and ro tate the main com mand dial until the de sired fl ash sync mode is se lect ed in the top con trol panel: 1A vailable only in ex po sure modes P and A .
112 T aking Photographs—Flash Photography 2 Mount an SB-800 or SB-600 Speedlight on the camera accessory shoe. 3 Tu rn the Speedlight on and set the fl ash mode to TTL or AA (see the Speedlight instruction manual for details). 4 Position the subject in the center of the frame and press the shutter -release button halfway to focus.
113 T aking Photographs—Flash Photography 7 Press the camera FUNC. button to r elease FV lock and confi rm that the FV lock icons ( and ) ar e no longer displayed in the control panel and viewfi nder . 6 Recompose the photograph and press the shutter -release button the rest of the way down to shoot.
114 T aking Photographs—Flash Photography Flash Contacts and Indicators The D2Hs is equipped with an accessory shoe for attaching Speedlights direct- ly to the camera and a sync terminal that allows Speedlights to be connected via a sync cable.
115 T aking Photographs—Interval Timer Photography The D2Hs is equipped to take photographs automatically at preset intervals. 1 Highlight Intvl timer shooting in the shoot- ing menu ( 158) and press the multi selector to the right.
116 T aking Photographs—Interval Timer Photography 3 Highlight Start at the bottom of the interval timer menu and press the multi selector up or down to select On , then press the button. The fi rst series of shots will be taken at the specifi ed starting time.
117 T aking Photographs—Interval Timer Photography During Shooting During interval timer photography , the icon in the top control panel will blink. Imme- diately before the next shooting interval b.
118 T aking Photographs—Interval Timer Photography No Ph otograph Photographs will not be taken if the self-timer is in operation or the previous photo- graph has yet to be taken, the memory buffer or memory car d is full, or the camera is unable to focus in single-servo AF (note that the camera focuses again before each shot).
119 T aking Photographs—Interval Timer Photography Shooting Mode Regardless of the shooting mode selected, the camera will take the specifi ed number of shots at each interval. In C H (continuous high speed) mode, photographs will be taken at a rate of eight shots per second.
120 T aking Photographs—Self-Timer Mode The self-timer can be used to reduce camera shake or for self-portraits. T o use the self-timer: 1 Mount the camera on a tripod (recommended) or place the camera on a stable, level sur face. 2 Press the shoot ing mode dial lock release and ro tate the shoot ing mode dial to select (self-tim er mode).
121 T aking Photographs—Non-CPU Lenses By specifying lens data (lens focal length and maximum aperture), the user can gain access to a variety of CPU lens functions when using a non-CPU lens.
122 T aking Photographs—Non-CPU Lenses 2 Highlight Focal length and press the multi selector to the right. 3 Select the group to which the lens belongs from 6 - 45 , 50 - 180 , 200 - 4000 and press the multi selector to the right. 4 Select the lens focal length (in mm) and press the multi selector to the right.
123 T aking Photographs—Non-CPU Lenses Specifying Maximum Aperture Lens maximum aperture can be specifi ed using the Non-CPU lens data op- tion in the shooting menu or by pressing the FUNC. button and r otating the sub-command dial. The following f/-numbers are available: • 1.
124 T aking Photographs—Non-CPU Lenses 2 Press the FUNC. button and r otate the sub- command dial. Maximum aperture is dis- played in the top control panel: The FUNC.
125 T aking Photographs—Using a GPS Unit Garmin and Magellan GPS units that conform to version 2.01 of the National Marine Electronics Association NMEA0183 pr otocol can be connected to the camera.
126 T aking Photographs—T wo-Button Reset The camera settings listed below can be re stored to default values by holding the WB and ISO but- tons down together for more than two seconds (these but tons are marked by a green dot). The control panels turn off briefl y while settings are reset.
127 This section details the operations that can be per formed during playback, including thumbnail play back, playback zoom, and photo information dis play .
128 More About Playback Using th e Multi S ele ctor The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is of f.
129 More About Playback Photo Information Photo in for ma tion is su per im posed on images displayed in single-im age play back. There ar e up to eight pag es of in for ma tion for each pho to.
130 More About Playback Page 4 (Shooting Data 2) * 100-1 ISO WHI WHI WHI W W ITE BAL. BAL. IT BAL B E WH HIT TE BAL. H E T L A B L. L. B HIT T L + + / / / – – – TO ONE E O O E SH HARPNESS PNESS .
131 More About Playback Page 7 (Highlights) * 100-1 RGB R G B Highlight 5 4 1 2 3 1 V oice memo icon ................................................ 139 2 Protect status .
132 More About Playback Vi ewing Multiple Images: Thumbnail Playback To display images in “con tact sheets” of four or nine images, press the button and rotate the main com mand dial.
133 More About Playback Press and / or rotate To Description Display menus Press button to display camera menus ( 39). Change protect status of highlighted photo Images marked by icon can not be de let ed using button or Delete op tion in playback menu (note that protected im ag es will be delet- ed when memory card is for mat ted).
134 More About Playback Ta king a Closer Look: Playback Zoom Press the button to zoom in on the im age displayed in single-image play- back or on the im age currently highlighted in thumbnail playback.
135 More About Playback Protecting Photographs fr om Deletion In full-frame, zoom, and thumbnail playback, the button can be used to protect pho to graphs from ac ci den tal deletion.
136 More About Playback Deleting Individual Photographs To delete a photograph displayed in single-image or zoom playback, or the pho to graph highlighted in thumbnail playback, press the button. Once de let ed, photographs can not be recover ed. 1 Display the image or highlight it in the thumbnail list.
137 The D2Hs is equipped with a built-in microphone, allowing voice memos to be added to photo- graphs. V oice memos can be played back over the camera’ s built-in speaker .
138 V oice Memos Recording V oice Memos V oice memos up to sixty seconds long can be added to photographs using the built-in microphone. In shooting mode, a voice memo can be added to the most recent photograph. In playback mode, voice memos can be added to photographs displayed in single-image playback or selected in the thumbnail list.
139 V oice Memos Interruptin g Recording Recording will end automatically if: • The button is pressed to display the menus • The button is pressed • The shutter-r elease button is pressed halfwa.
140 V oice Memos Vo ice Memo Recording Options Three setup menu options contr ol voice memo recor ding: V oice memo , V oice memo overwrite , and V oice memo button . V oice Memo To choose a voice memo option for shooting mode, highlight Vo ice memo in the setup menu ( 201) and press the multi selector to the right.
141 V oice Memos V oice Memo Overwrite This option controls whether the voice memo for the most recent photograph can be overwritten in shooting mode. Highlight V oice memo over - write in the setup menu ( 201) and press the multi selector to the right.
142 V oice Memos Playing V oice Memos V oice memos can be played back over the cam- era’ s built-in speaker when the associated image is viewed in single-frame playback or highlighted in the thumbnail list. The presence of a voice memo is indicated by an icon.
143 V oice Memos Vo ice Memo Playback Options The Audio output option in the setup menu controls whether voice memos ar e played back over the camera’ s built-in speaker or by a device to which the camera is connected via the EG-D2 audio / video cable.
144.
145 Changes to a variety of camera settings are made with the help of menus that appear in the camera monitor . This chapter covers: The Playback Menu The playback menu contains options for manag- ing the images stored on memory car ds, and for play ing pictures back in automated slide shows.
146 Menu Guide—The Playback Menu The playback menu contains the following options: The Playback Menu Managing Images Option Delete 146–147 Playback folder 148 Slide show 149–150 Hide image 151.
147 Menu Guide—The Playback Menu Highlight image. (T o view highlight- ed image full screen, press . Press again to return to thumbnail list.) 1 Confi rmation dialog displayed.
148 Menu Guide—The Playback Menu Playback Folder To display the playback folder menu, highlight Playback folder in the playback menu ( 146) and press the multi selector to the right. Pr ess the multi selector up or down to highlight an option, then press to the right to make a selection.
149 Menu Guide—The Playback Menu Slide Show To play images back one after the other in an automated “slide show ,” highlight Slide show in the playback menu ( 146) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.
150 Menu Guide—The Playback Menu The dialog shown at right is displayed when the show ends or when the button is pressed to pause playback. Press the multi selector up or down to highlight an option, then press to the right to make a selection. • Restart : Resume slide show .
151 Menu Guide—The Playback Menu Hide Image The Hide image option is used to hide or r eveal selected photographs. Hid- den images are visible only in the Hide image menu, and can only be deleted by formatting the memory card. Highlight Hide image in the playback menu ( 146) and press the multi selector to the right.
152 Menu Guide—The Playback Menu Revealing All Photographs: Deselect All Choosing Deselect all? displays the confi rmation dialog shown at right. Press the multi selector up or down to highlight an option, then press the button to make a selection.
153 Menu Guide—The Playback Menu Print Set Print set is used to create a digital “print or der” that lists the photographs to be printed, the number of copies, and the information to be included on each print. This information is stored on the memory car d in D igital P rint O rder F ormat (DPOF).
154 Menu Guide—The Playback Menu Modifying the Print Order: Select / Set Choosing Select / set displays the photographs in the fold er or folders se- lected in the Playback folder menu ( 148) as small thumb nail images.
155 Menu Guide—The Playback Menu Removing All Images from the Print Or der: Deselect All Choosing Deselect all? displays the confi rmation dialog shown at right. Press the multi selector up or down to highlight an option, then press the button to make a selection.
156 Menu Guide—The Playback Menu Display Mode To choose the information listed in the photo- information display ( 129), highlight Display mode in the playback menu ( 146) and press the multi selector to the right. Press the multi se- lector up or down to highlight options, then press to the right to make a selection.
157 Menu Guide—The Playback Menu After Delete To choose whether the following or previous pic- ture is displayed after an image is deleted, high- light After delete in the playback menu ( 146) and press the multi selector to the right. Pr ess the multi selector up or down to highlight an option, then press to the right to make a selection.
158 Menu Guide—The Shooting Menu The shooting menu contains three pages of options: The Shooting Menu Shooting Options Using th e Multi S ele ctor The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is of f.
159 Menu Guide—The Shooting Menu Shooting Menu Bank All shooting menu options except interval timer settings are stor ed in one of four banks. Changes to settings in one bank have no effect on the others. To store a particular combination of fr equently-used settings, select one of the four banks and set the camera to these settings.
160 Menu Guide—The Shooting Menu Renaming Shooting Menu Banks 1 Highlight Rename and press the multi selector to the right. 2 A list of shooting menu banks will be dis- played. Highlight the desired bank and pr ess the multi selector to the right. 3 The following dialog will be displayed.
161 Menu Guide—The Shooting Menu Reset Shooting Menu To r estore default settings for the curr ent shooting menu bank ( 159), highlight Reset shooting menu in the shooting menu ( 158) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.
162 Menu Guide—The Shooting Menu Active Folder To select the folder in which subsequent im- ages will be stored, highlight Active folder in the shooting menu ( 158) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection.
163 Menu Guide—The Shooting Menu File Naming Photographs are saved using fi le names consisting of “DSC_” or “_DSC” followed by a four -digit fi le number and a three-letter extension (e.g., “DSC_ 0001.JPG”). The File Naming option is used to change the “DSC” portion of the fi le name.
164 Menu Guide—The Shooting Menu Raw Compression Choose whether to compress NEF (RA W) images created at image-quality settings of RA W + JPEG (Fine) , RA W + JPEG (Normal) , RA W + JPEG (Ba- sic) , and NEF (Raw) . See “T aking Photographs: Image Quality and Size” ( 46).
165 Menu Guide—The Shooting Menu Long Exp. NR Photographs taken at shutter speeds of 1 s or slower can be processed to r educe “noise” in the form of randomly-spaced, brightly-col ored pix els. Highlight Long exp. NR in the shooting menu ( 158) and press the multi selector to the right.
166 Menu Guide—The Shooting Menu ISO Sensitivity (ISO equivalency) can be increased fr om the default value (200). Settings of HI-1 and HI-2 are only available when Custom Setting b1 ( ISO auto ) is off. See “T aking Photographs: Sensitivity (ISO Equivalency)” ( 50).
167 Menu Guide—The Shooting Menu Hue Adjustment Hue can be set to values between approximately –9 ° and +9 ° in seven increments of r oughly 3 °. See “T aking Photographs: Image Adjustment” ( 69). Interval Timer Shooting T ake photographs automatically at pre-selected intervals.
168 Menu Guide—Custom Settings Custom settings are used to fi ne-tune a variety of camera settings to suit the user’ s pref er enc es, creating combinations of settings that differ fr om the fac- tory defaults in effect at the time your cam era was purchased.
169 Menu Guide—Custom Settings Options Bank select Custom setting bank Menu reset Reset CSM menu C R 171 172–173 Timers/AE&AF Lock c AE-L/AF-L Assignment of AE-L/AF-L button c2 184 Monitor off.
170 Menu Guide—Custom Settings Options Shooting/Display d Maximum shots Max No . of shots taken in continuous shooting d2 186 Shooting speed CL-Mode shooting speed d1 186 Exp . delay mode Exposure delay mode d3 187 Illumination LCD Illumination d6 189 Cntrl panel/fi nder Control panel/viewfi nder display d5 188–189 File No .
171 Menu Guide—Custom Settings Custom Setting C: Custom Setting Bank Custom Settings are stor ed in one of four banks. Changes to settings in one bank have no effect on the others. T o store a particular combination of frequently-used settings, select one of the four banks and set the camera to these settings.
172 Menu Guide—Custom Settings Tw o - B u t t o n R e s e t Custom Settings are not r eset when a two-button reset is performed ( 126). Cus tom Settings Bank If settings in the current bank have been modifi ed fr om default values, the rear contr ol panel display will show CUSTOM and the letter of the bank.
173 Menu Guide—Custom Settings Default settings are listed below . Option AF-S mode priority a2 Fo cu s V ertical AF-ON a8 AF-ON+F ocus area Focus ar ea a7 No wrap AF activation a5 Shutter/AF-ON AF-C mode priority a1 FPS rate Group dynamic AF a3 P attern 1 / Center area ISO step value b2 1/3 step Center weight b6 φ 8 mm Exposure comp .
174 Menu Guide—Custom Settings Custom Setting a1: AF-C Priority Selection This option controls whether photographs can be taken whenever the shutter -release button is pressed ( release priority ) or only when the camera is in focus ( focus priority ) in continuous-servo AF .
175 Menu Guide—Custom Settings Custom Setting a3: Pattern Selection in Group Dynamic AF This option controls how focus ar eas are gr ouped in group dynamic-AF ( 75) and whether the camera gives priority to the subject in the center focus area of the selected gr oup.
176 Menu Guide—Custom Settings * The center focus-area gr oup is selected by pressing the center of the multi selector once to activate the current center focus-ar ea group and then pr essing the center of the multi selector to toggle between “center 1” and “center 2.
177 Menu Guide—Custom Settings Custom Setting a4: Focus T racking with Lock-On This option controls how autofocus adjusts to sudden large changes in the distance to the sub- ject. Highlight a4 Lock-On in the second level of the CSM menu ( 169) and press the multi selector to the right.
178 Menu Guide—Custom Settings Custom Setting a6: Focus Area Illumination The options in this menu control when the focus areas ar e illuminated and for how long. Highlight a6 Focus area illum in the second level of the CSM menu ( 169) and press the multi selector to the right.
179 Menu Guide—Custom Settings Custom Setting a8: Ve rtical AF-ON Button Function This option determines what functions are as- signed to the AF-ON button for vertical shooting. Highlight a8 V ertical AF-ON in the second level of the CSM menu ( 169) and press the multi selector to the right.
180 Menu Guide—Custom Settings When On is selected, the r ear control-panel dis- play shows ISO-AUTO and ISO-A appears in the viewfi nder sidebar . These indicators fl ash when sensitivity is altered fr om the value selected by the user .
181 Menu Guide—Custom Settings Custom Setting b2: ISO Step V alue This option determines whether adjustments to sensitivity (ISO equivalency) are made in incr e- ments equivalent to 1 / 3 EV ( 1/3 step , the default option), ½ EV ( 1/2 step ), or 1 EV ( 1 step ).
182 Menu Guide—Custom Settings Option Description Off (default) On Exposure compensation set by r otating command dial only . Dial used de- pends on option selected for Custom Setting f5 > Change Main / Sub .
183 Menu Guide—Custom Settings Custom Setting b6: Center Weight Area When calculating exposure, center -weighted me- tering assigns the greatest weight to a cir cle in the center of the frame.
184 Menu Guide—Custom Settings Custom Setting c2: Assignment of AE-L/AF-L Button This option controls the behavior of the AE-L/AF-L button. Highlight c2 AE-L/AF-L in the second level of the CSM menu ( 169) and press the multi selector to the right.
185 Menu Guide—Custom Settings Custom Setting c3: Auto Meter-of f Delay This option controls how long the camera con- tinues to meter exposure when no operations ar e performed: 4 s, 6 s (the default option), 8 s, or 16 s or until the camera is turned off ( No limit ).
186 Menu Guide—Custom Settings Highlight d2 Maximum shots in the second level of the CSM menu ( 170) and press the multi selector to the right. Press the multi selector up or down to choose the number of shots, then press to the right to make a selection.
187 Menu Guide—Custom Settings Custom Setting d3: Exposure Delay Mode Shutter release can be delayed until about 0.4 s after the shutter -release button is pressed, r educ- ing camera shake in situations in which the least camera movement could result in blurr ed photo- graphs (for example, microscope photography).
188 Menu Guide—Custom Settings Custom Setting d4: File Number Sequence When a photograph is taken, the camera names the fi le new by adding one to the last fi le number used.
189 Menu Guide—Custom Settings Option Description Rear control panel Controls whether r ear control panel shows sen- sitivity (ISO equivalency) or number of exposures r emaining. Pr ess multi selector up or down to highlight option, press to right to select: • ISO (default): Rear panel shows sensitivity .
190 Menu Guide—Custom Settings Custom Setting e1: Flash Sync Speed Setting This option controls fl ash sync speed. Options range from ½ 50 s ( 1/250 , the default setting) and 1 / 60 s ( 1/60 ).
191 Menu Guide—Custom Settings Custom Setting e3: AA Flash Mode This option controls whether fl ash level is auto- matically adjusted for aperture when an external exposure meter is used with an SB.
192 Menu Guide—Custom Settings Custom Setting e5: Auto Bracketing Set This option controls what settings ar e affected when auto bracketing is in effect. Highlight e5 Auto BKT set in the second level of the CSM menu ( 170) and press the multi selector to the right.
193 Menu Guide—Custom Settings Custom Setting e6: Auto Bracketing in M Exposure Mode This option controls what settings ar e affected when AE & fl ash or AE only is selected for Custom Setting e5 in manual exposure mode. Highlight e6 Manual mode bkting in the sec- ond level of the CSM menu ( 170) and press the multi selector to the right.
194 Menu Guide—Custom Settings Custom Setting e8: Auto Bracketing Selection Method This option controls how the bracketing pr ogram is selected. Highlight e8 Auto BKT selection in the second level of the CSM menu ( 170) and press the multi selector to the right.
195 Menu Guide—Custom Settings Press the multi selector up or down to highlight an option, then pr ess to the right to make a selection. Option Description Center AF area (default) Pressing center of multi selector selects center focus ar ea or center focus-area gr oup (group dynamic-AF).
196 Menu Guide—Custom Settings Custom Setting f2: When Multi Selector Is Pressed If desired, the multi selector can be used to ac- tivate the exposure meters or initiate autofocus. Highlight f2 Multi selector in the second level of the CSM menu ( 170) and press the multi selector to the right.
197 Menu Guide—Custom Settings Custom Setting f4: Assign FUNC. Button This option controls the function performed by the FUNC. button. Highlight f4 FUNC.
198 Menu Guide—Custom Settings Custom Setting f5: Customize Command Dials This option controls the operation of the main and sub-command dials. Highlight f5 Command dials in the second level of the CSM menu ( 170) and press the multi selector to the right.
199 Menu Guide—Custom Settings Option Description Menus and Playback Controls functions performed by command dials during playback or when menus are displayed.
200 Menu Guide—Custom Settings Custom Setting f7: Disable Shutter If No CF Card This option can be used to enable the shutter re lease when no memory card is inserted in the cam era.
201 Menu Guide—The Setup Menu The setup menu contains three pages of options: The Setup Menu Camera Setup Using th e Multi S ele ctor The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is of f.
202 Menu Guide—The Setup Menu Format Memory cards must be formatted befor e fi rst use. For mat ting mem o ry cards is also an ef fec tive way of de let ing all pic tures on the card. T o for mat a memory card, highlight Format in the setup menu ( 201) and press the multi selector to the right.
203 Menu Guide—The Setup Menu LCD Brightness To adjust monitor brightness, highlight LCD brightness in the setup menu ( 201) and press the multi selector to the right. The menu shown at right will be displayed. Press the multi selector up to increase brightness, down to decr ease.
204 Menu Guide—The Setup Menu Vid eo Mode Before connecting your camera to a video device such as a television or VCR ( 222), choose a vid- eo mode setting that matches the video standard used in the device. Highlight V ideo mode in the setup menu ( 201) and press the multi selector to the right.
205 Menu Guide—The Setup Menu To move the cursor in the comment area, pr ess the button and use the multi selector . T o enter a new letter at the curr ent cursor position, use the multi selector to highlight the desired character in the keyboar d area and press the center of the multi selector .
206 Menu Guide—The Setup Menu Auto Image Rotation The D2Hs is equipped with a built-in sensor that detects camera orientation. Information from this sensor can be embedded in photographs as they ar .
207 Menu Guide—The Setup Menu Audio Output This menu contains output options for voice memos. See “V oice Memos” ( 143). Vo i ce Memo V oice memo contains options for recording voice memos in shooting mode.
208 Menu Guide—The Setup Menu USB Before connecting the camera to a com put er via USB ( 223), select the appropriate USB option as determined by the computer operating system and whether the camera is being controlled fr om Nikon Capture 4 version 4.
209 Menu Guide—The Setup Menu Dust Off Ref Photo This option is used to acquire r eference data for the Image Dust Of f function in Nikon Capture 4 version 4.2.1 or later (available via download to pur chas- ers of Nikon Capture 4; for mor e information, see the Nikon Capture 4 User’ s Manual ).
210 Menu Guide—The Setup Menu Image Dus t Of f Refe renc e Data Image Dust Off r eference data ar e recorded to the memory card at an image quality of JPEG Fine and an image size of Large. When the resulting image is played back on the camera, a grid pattern is displayed and voice memos can not be recor ded.
211 Menu Guide—The Setup Menu Battery Info To view information on the EN-EL4 rechargeable Li-ion battery currently inserted in the camera, highlight Battery Info in the setup menu ( 201) and press the multi selector to the right. Option Description Battery meter Current battery level expressed as a per centage ( 27).
212 Menu Guide—The Setup Menu Wireless LAN Options for the WT -2 / 2A Settings for the WT -2 / 2A differ depending on whether the transmitter is be- ing used to send data to an ftp server or to connect to a computer running Nikon Capture 4 Camera Contr ol (available separately; Nikon Capture 4 ver - sion 4.
213 Menu Guide—The Setup Menu Wireless LAN system Tu rn the WT -2 / 2A on or off. Press the multi se- lector up or down to highlight an option and then press the multi selector to the right. Option Description Off (default) On WT -2 / 2A off; wireless link available.
214 Menu Guide—The Setup Menu Network settings : Adjust settings for connection to a wireless network. Pr ess the multi selector up or down to highlight an option and then press the multi selector to the right. Option Description Load settings fi le? Load Wireless , TCP/IP , and FTP settings from camera memory card.
215 Menu Guide—The Setup Menu Option Description Edit connection list Edit list of computers with which camera is paired. Computers can be deleted from list or pairing can be suspended by selecting Disable (remember to enable pairing befor e reconnecting).
216 Menu Guide—The Setup Menu Send fi le as : When sending images taken at set- tings of NEF + JPEG Fine , NEF + JPEG Normal , or NEF + JPEG Basic , choose whether to send both NEF and JPEG fi les or only the JPEG fi les. Press the multi selector up or down to highlight an option and then press the multi selector to the right.
217 Menu Guide—The Setup Menu Wireless LAN Options for the WT -1 / 1A The following options are available when the WT -1 / 1A is connected. T ransceiver Tu rn the WT -1 / 1A transceiver on or off. Press the multi selector up or down to highlight an option and then press the multi selector to the right.
218 Menu Guide—The Setup Menu Send Folder Entire folders can be selected for transmission to the server . See “Send folder” ( 216). Deselect All? Remove “send,” “sending,” and “sent” marking from all images on the memory car d. See “Dese- lect all” ( 216).
219 Menu Guide—The Setup Menu Network Settings Adjust network settings for connection to the server . Press the multi selector up or down to highlight an option and then press the multi se- lector to the right. Option Description Load settings fi le? Load Wireless , TCP/IP , and FTP set- tings from camera memory car d.
220.
221 Photographs and camera menus can be displayed on a tele vi sion screen or recorded to video tape. If the supplied software is installed, the cam era can be connected to a com put er and pho to - graphs copied to disk for ed it ing, viewing, print- ing, or long-term stor age.
222 Connections—T elevision Playback T elevision Playback Connecting the Camera to a Video Device Use an AC Adapter Use of an EH-6 AC adapter (available separately) is recommended for extended play- back.
223 Connections—Connecting to a Computer Connecting to a Computer Data T ransfer and Camera Control The supplied UC-E4 USB cable can be used to connect the camera to a com- puter . Once the camera is connected, PictureProject can be used to copy photographs to the computer , where they can be browsed, viewed, and r etouched.
224 Connections—Connecting to a Computer Connecting the USB Cable 1 Tu rn the computer on and wait for it to start up. 2 Tu rn the camera of f. 3 Connect the UC-E4 USB cable as shown. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.
225 Connections—Connecting to a Computer Macintosh Drag the camera volume (“NIKON D2HS”) into the T rash. Disconnecting the Camera If PTP is selected for USB ( 208), the camera can be tur ned of f and the USB cable disconnected once transfer is complete.
226 Connections—Connecting to a PictBridge Printer When the camera is connected to a PictBridge-compatible printer via the supplied UC-E4 USB cable, selected JPEG images can be printed directly from the camera. Befor e connecting the printer , confi rm that it supports PictBridge.
227 Connections—Connecting to a PictBridge Printer 5 Tu rn the camera on. A welcome screen will be displayed in the monitor , followed by a PictBridge menu. 6 Press the multi selector up or down to high- light Setup and press the multi selector to the right.
228 Connections—Connecting to a PictBridge Printer Printing Selected Photographs To print selected photos, highlight Print in the PictBridge menu and press the multi selector to the right. The menu shown in Step 1 will be displayed. Highlight Print select .
229 Connections—Connecting to a PictBridge Printer 7 Scroll through photos. Current photo shown at bottom of display . Repeat steps 7 and 8 to select additional pictures. T o deselect picture, highlight and press center of multi selector . T o exit to PictBridge menu without printing, press button.
230 Connections—Connecting to a PictBridge Printer Printing the Current Print Or der To print the current print order , highlight Print (DPOF) in the PictBridge menu and press the multi selector to the right. This option is only available if a print order is pr esent on the memory card.
231 This chapter covers the following topics: Optional Accessories A list of the lenses and other accessories available for the D2Hs. Caring for the Camera Information on storage and maintenance. T roubleshooting A list of the error messages displayed by your cam era and how to deal with them.
232 T echnical Notes—Optional Accessories Optional Accessories Lenses and Other Accessories Lenses for the D2Hs The D2Hs is compatible with a variety of AF Nikkor lenses for 35-mm fi lm cam er as, including wide-angle, telephoto, zoom, micro, defocus image con- trol (DC), and r egular lenses with focal lengths of 14–600 mm ( 234).
233 T echnical Notes—Optional Accessories f/2.8S, AF 35–70 mm f/2.8S, new AF 28–85 mm f/3.5–4.5S, or AF 28–85 mm f/3.5–4.5S lens at maximum zoom, in-focus indicator may be displayed when image on matte screen in viewfi nder is not in focus.
234 T echnical Notes—Optional Accessories CPU lenses can be iden ti fi ed by the pr esence of CPU contacts. T ype G lenses are marked with a “G” on the lens barr el, type D lenses with a “D.” T ype G lenses are not equipped with a lens apertur e ring.
235 T echnical Notes—Optional Accessories Other Accessories At the time of writing, the following accessories were available for the D2Hs. Contact your retailer or local Nikon r epresentative for details.
236 T echnical Notes—Optional Accessories Viewfi nder eyepiece accessories ♦ F ocusing Scr eens : The following focusing screens are available for the D2Hs: T ype E III The type E clear -matte III focusing screen is etched with a grid, making it suitable for copying and architec- tural photography .
237 T echnical Notes—Optional Accessories Optional Speedlights ♦ SB-800 : This high-performance Speedlight has a Guide Number of 53/174 (m/ft, 35-mm zoom head position, ISO 200; GN at ISO 100 is 38/125) and supports i-TTL, TTL, auto aperture (AA), non-TTL auto (A), manual, and repeating fl ash control.
238 T echnical Notes—Optional Accessories Optional Speedlights (continued) ♦ SB-600 : This high performance Speedlight has a Guide Number of 42/138 (m/ft, 35-mm zoom head position, ISO 200; GN at ISO 100 is 30/98) and supports i-TTL, TTL, and manual fl ash control.
239 T echnical Notes—Optional Accessories Remote terminal accessories The D2Hs is equipped with a ten-pin remote terminal for remote contr ol and automatic photography . The terminal is provided with a cap, which protects the contacts when the terminal is not in use.
240 T echnical Notes—Optional Accessories Approved Memory Car ds The following cards have been tested and appr oved for use in the D2Hs: SanDisk SDCFB 128 MB, 160 MB, 192 MB, 256 MB, 384 MB, 512 MB,.
241 T echnical Notes—Caring for the Camera Caring for the Camera Storage and Maintenance Storage When the camera will not be used for an extended period, replace the mon- i tor cover , remove the battery , and stor e the battery in a cool, dry area with the terminal cover in place.
242 T echnical Notes—Caring for the Camera Replacing the Focusing Screen A type B BriteView III focusing screen is inserted in the camera at shipment. To insert an optional type E clear -matte III focusing screen ( 236): 1 Tu rn the camera of f and remove the lens.
243 T echnical Notes—Caring for the Camera Replacing the Clock Battery The camera clock is powered by a CR1616 lithium battery with a life of about four years. If the icon is displayed in the top control panel while the exposure meters ar e on, the battery is running low and needs to be replaced.
244 T echnical Notes—Caring for the Camera The Low-Pass Filter The image sensor that acts as the cam era’ s picture element is fi tted with a low-pass fi lter to prevent moiré.
245 T echnical Notes—Caring for the Camera 6 Holding the camera so that light falls on the low-pass fi lter , ex am ine the fi lter for dust or lint. If there ar e for eign ob jects on the fi lter , the fi lter r equires cleaning. See the fol low ing sec tion.
246 T echnical Notes—T roubleshooting Tr oubleshooting Understanding Error Messages and Displays This section lists the indicators and error messages that appear in the view- fi nder , contr ol panel, and monitor when there is a pr oblem with the camera.
247 T echnical Notes—T roubleshooting Indicator Control panel View- fi nder Solution 108 Speedlight that does not sup port D-TTL fl ash contr ol at tached and set to TTL. (blinks) Change fl ash mode setting on optional Speedlight. 114 If indicator blinks for 3 s after fl ash fi res, photo may be un- der ex posed.
248 T echnical Notes—T roubleshooting Indicator Control panel Solution Problem Monitor 22, 148 No images on memory card or folder(s) selected for play back contain no images. FOLDER CONT AINS NO IMAGES Select folder containing im- ages from Playback folder menu or insert differ ent memory card.
249 T echnical Notes—Specifi cations T ype Single-lens refl ex digital camera with interchangeable lenses Effective pixels 4.1 million Lens mount Nikon F mount (with AF coupling and AF contacts) Picture angle Equivalent in 35-mm format is approximately 1.
250 T echnical Notes—Specifi cations Autofocus Detection range (ISO 100 at 20 °C / 68 °F) –1 – +19 EV (0– +19EV for focus areas at left and right edges of frame) AF-area mode Single-ar ea A.
251 T echnical Notes—Specifi cations Flash Sync contact X-contact only; fl ash synchronization at up to ½ 50 s Sync modes Front curtain sync (normal), slow sync, rear -curtain sync, red- eye redu.
252 T echnical Notes—Specifi cations Video output Can be selected from NTSC and P AL External interface USB 2.0 T ripod socket ¼˝ (ISO) Supported languages Chinese (Simplifi ed), Dutch, English, French, German, Italian, Japanese, Korean, Spanish, Swedish Firmware User upgradeable Dimensions (W × H × D) Appr oximately 157.
253 T echnical Notes—Specifi cations Battery Life The number of shots that can be taken with an EN-EL4 battery varies with the con- di tion of the battery , temperature, and how the camera is used.
254 Index Menus PLA YBA CK MENU , 146–157 Delete , 146–147 Playback folder , 148 Slide show , 149–150 Hide image , 151–152 Print set , 153–155 Display mode , 156 Image review , 156 After del.
255 Index Blur , reducing, 33, 50–51, 86. See also Exposure delay mode; Mirror -up mode Bulb. See Long time exposur es Bracketing, 96–103. See also Ex po sure bracketing; White bal ance, bracketing Brightness. See Monitor , bright- ness of C C. See Autofocus, continu- ous-servo C H .
256 Index Metering, 82 3D color matrix, 82 center -weighted, 82 color matrix, 82 spot, 82 Microdrive. See memory car d Mirror up. See Shooting mode Monitor , 5, 241 auto off, 185 brightness of, 203 cover , 28 Monitor pre-fl ashes, 105, 106, 112 Multi Sensor Balanced Fill- Flash for Digital SLR, 106 M- UP .
Printed in Japan SB5E00200201(11) 6MBA3511-- No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORA TION.
An important point after buying a device Nikon D2HS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nikon D2HS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nikon D2HS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nikon D2HS you will learn all the available features of the product, as well as information on its operation. The information that you get Nikon D2HS will certainly help you make a decision on the purchase.
If you already are a holder of Nikon D2HS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nikon D2HS.
However, one of the most important roles played by the user manual is to help in solving problems with Nikon D2HS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nikon D2HS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
