Instruction/ maintenance manual of the product Door Lock Assa Abloy
Go to page of 11
Copyright, 2001, all rights reserved • Securitron Magnalock Corp., 550 Vista Blvd., Sparks NV 89434, USA Tel: (775) 355-5625 • (800) MAGLOCK • Fax: (775) 355-5636 • Website: www.securitron.com An ASSA ABLOY Group company PN# 500-18800 Page 1 Rev.
Rev. A.1, 8/01 Page- 2 2.2 HOLLOW METAL (STEEL) FRAME MOUNTING Remove the existing ANSI 4 7/8” strike plate (it will be discarded) and experimentally try to fit the Mortise UnLatch in the resulting cavity.
Rev. A.1, 8/01 Page- 3 lines and knowledge of the gap between the sp ringlatch and deadlatch pin are used to determine the vertical position of the springlatch plunger. When this gap is greater than ¼”, best reliability is obtained when the springlatch pl unger position is centered on the springlatch.
Rev. A.1, 8/01 Page- 4 FIG. 3: ADJUSTING SPRINGLATCH POSITION 2.5 FINAL ADJUSTMENT WITH SPACERS For reliable operation, the door needs to close so that the latch eas ily enters and is retained by the Mortise UnLatch. The door should not hav e to be pushed to engage as can be the case with a poorly fitting or poorly closing door.
Rev. A.1, 8/01 Page- 5 If the amount of slack or ratt ling is less than 1/16-1/8”, you have a “tight” door and the ability of the door to close and latch reli ably is in question. To adjust for this, first check to see if the stop has “ silencers ” on it.
Rev. A.1, 8/01 Page- 6 FIG 5: MORTISE UNLATCH SIDE VI EW IN REST (SECURE) POSITION DEADLATCH PIN SPRINGLATCH DEADLATCH FINGE RS SPRINGLATCH PLUNG ER IN THE REST (SECURE) P OSITION, THE SPRINGLA TCH IS A LLOWED TO COME OUT BY T HE SPRINGLATCH PLUNGER THEREBY SE CURING THE DOOR.
Rev. A.1, 8/01 Page- 7 Note that if the door is heavily pre-loaded (by someone trying to pull it open before the Mortise UnLatch has released it for example), the Mo rtise UnLatch may not possess enough power to release the door. This is termed a stall condition for the motor.
Rev. A.1, 8/01 Page- 8 UnLatches, the extra current capability will always be there as each unit will operate at different times so each can draw extra current from the power supply when needed.
Rev. A.1, 8/01 Page- 9 MAGNACARE LIMITED LIFETIME WARRANTY SECURITRON MAGNALOCK CORPORATION wa rrants that it will replace at cu stomer’s request, at any time for any reason, products manufac tured and branded by SECURITRON.
Rev. A.1, 8/01 Page- i APPENDIX A: TROUBLESHOOTING PROBLEM -- Unit w ill not operate w hen trigger wire is connected to +V. On a new installation, make sure that DC power (12 or 24 volts depending on the model) is connected to the red and black wires with correct polarity.
Rev. A.1, 8/01 Page- ii TEMPLATE FOR CHISELING OUT A WOOD FRAME DOTTED LINE SHOW S AREA TO CHISEL OUT 1 7/8" DEEP FO R INSTALLA TION IN WOOD FRAME 4 7/8" 1 1/4" 4 1/8" CENTER LINE.
An important point after buying a device Assa Abloy Door Lock (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Assa Abloy Door Lock yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Assa Abloy Door Lock - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Assa Abloy Door Lock you will learn all the available features of the product, as well as information on its operation. The information that you get Assa Abloy Door Lock will certainly help you make a decision on the purchase.
If you already are a holder of Assa Abloy Door Lock, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Assa Abloy Door Lock.
However, one of the most important roles played by the user manual is to help in solving problems with Assa Abloy Door Lock. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Assa Abloy Door Lock along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
