Instruction/ maintenance manual of the product AF-10 Nikon
Go to page of 10
- 1 - User ’ s Manual Auto Document Feeder AF-10 Contents Introduction Installing the AF-10 Using the AF-10 Loading Documents Manually T roubleshooting Specifications Paper Limitations.
- 2 - Cautions • The reproduction of all or part of this manual without our permission is prohibited. • The information contained in this manual is subject to change without notice. • We have made every effort to produce a perfect manual, but should you find any mistakes, we would be grateful if you would kindly let us know.
- 3 - Intr oduction Thank you for purchasing the Nikon Auto Document Feeder AF-10 for the full-color flatbed scanner ScanTouch 110. This manual describes the procedure for setting up the AF-10 and connecting it to the ScanTouch 110. Please read this manual thoroughly to ensure proper installation and operation of the unit.
- 4 - 3. Fit the two holes in the hinge plate of the AF-10 over the small supporting posts on the scanner. 4. Gently slide the AF-10 so that the supporting posts move into the narrow sections of the holes. 5. Attach the AF-10 with the two lockdown screws provided.
- 5 - Using the AF-10 Begin by removing any document from the document setting glass of the scanner, and then make sure that the AF-10 is closed. 1. Turn the scanner on.
- 6 - Loading Documents Manuall y You can still load documents manually, even with the AF-10 installed. 1. Open the front end of the AF-10. 2. Place the document on the document setting glass of the scanner, then lower the AF-10 and initiate the scan.
- 7 - T r oubleshooting Remo ving a Jammed Document 1. Raise the cover of the AF-10. 2. (Condition 1) If the jammed paper is at the exit of the AF-10, lift the upper tray, and slowly pull the jammed paper toward you until it is fully released from the feeder mechanism.
- 8 - Replacing the T ransparent Sheet The quality of your scans may degrade overtime. Quite often this is caused by a scratched or dirty Transparent Sheet. You can contact your dealer to purchase a replacement. To replace a worn Transparent Sheet, follow these steps: 1.
- 9 - Specifications Weight: 10.0 lbs (4.5kg) Dimensions: 12.7 (W) x 20.6 (D) x 4.1 (H) inches (322 x 524 x 104mm) Paper capacity: 6mm document stack (50 pages for 0.1t paper) Operating Environment: Temperature: 41 ° F to 95 ° F (5 ° C to 35 ° C) Humidity: 20 to 85% R.
- 10 - ERKLÄRUNG ÜBER EG-NORMENGERECHTHEIT Wir Name: Nikon UK Limited Anschrift: Nikon House, 380 Richmond Road, Kingston, Surrey KT2 5PR, UK erklären hiermit, daß das folgende Produkt Produktbezeichnung: Automatischer Vorlageneinzug AF-10 Name des Herstellers: Nikon Corporation Anschrift des Herstellers: Fuji Bldg.
An important point after buying a device Nikon AF-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nikon AF-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nikon AF-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nikon AF-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Nikon AF-10 will certainly help you make a decision on the purchase.
If you already are a holder of Nikon AF-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nikon AF-10.
However, one of the most important roles played by the user manual is to help in solving problems with Nikon AF-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nikon AF-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
