Instruction/ maintenance manual of the product VT-1.2 NHT
Go to page of 5
Model VT -1.2 Audio / V ideo T ower Loudspeaker Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT -9993 OWNER’S MANUAL .
Thank you for your purchase of the NHT Model VT -1.2 Audio / V ideo T ower Loudspeaker . Please take a few minutes to read through this Owner ’s Manual prior to inst alling your new speakers. The information provided will help you to obtain maximum performance from your audio system.
Placement The Model VT -1.2 is a floorstanding loudspeaker that requires no stands or mounting hardware other than the included S pikeKit. The VT -1.2 is designed for indoor use only . For best results, the VT -1.2’s are best situated at least six inches from the rear wall (due to the rear vent) and at least one foot from the side walls.
screws in their holes before tightening them down. This will prevent crossthreading . Before installing the spikes, turn the speakers upright and position them. When you have found the perfect spot, careful- ly tilt the speakers and screw in the spikes with the lock nuts on them.
other . If different types of cables are placed near each other at some place in your system, separate them by the maxi- mum practical distance and cross them at right angles where they meet. Do not twist or tie AC power cords with speaker cables. Operation The Model VT -1.
An important point after buying a device NHT VT-1.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NHT VT-1.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NHT VT-1.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NHT VT-1.2 you will learn all the available features of the product, as well as information on its operation. The information that you get NHT VT-1.2 will certainly help you make a decision on the purchase.
If you already are a holder of NHT VT-1.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NHT VT-1.2.
However, one of the most important roles played by the user manual is to help in solving problems with NHT VT-1.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NHT VT-1.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
