Instruction/ maintenance manual of the product NX1000 Nexus 21
Go to page of 25
Installation and Operation Manual English Installation and Operation Manual English NX1000 - Handheld VHF Radio -.
VHF NX1000 1.
VHF NX1000 2 IN CASE OF EMERGENCY If your vessel requires assistance, c ontact other vessels or the Coast Guard by sending a distress call on Channel 16. USE CHANNEL 16! EMERGENCY CALL PROCEDURE 1. MAYDAY MAYDAY MAYDAY. 2. THIS IS “Name of vessel”, followed by: 3.
VHF NX1000 3 • Large LCD, easy-to-read With dimensions of 32(H) × 39(W) mm, the NX1000’s function display is easy to read and show s operating c onditions at a glance. Backlight can be adjusted to suit your preference. • Easy-to-use 8 large buttons on the front panel provide convenient operation.
VHF NX1000 4 Contents RECOMMENDATION ................................................................................ 2 IMPORTAN T .............................................................................................. 2 FEAT URES .............
VHF NX1000 5 1 OPERATION RULES 1.1 Priorities • Read all rules and regulations pertaining to priorities and keep an up- to-date copy handy. Safety and distress calls take priority over all others. • You must monitor Channel 16 when you are not operating on another channel.
VHF NX1000 6 2 INSTALLATION AND ATTACHMENTS 2.1 Installation Follow the picture below to install a complete transceiver: 2.2 Accessories Number Supplied accessories Qty.
VHF NX1000 7 2.3 Attachments 2.3.1 Flexible antenna Connect the supplied flexible antenna to the antenna connector. • NEVER HOLD by the antenna w hen carrying the transceiver.
VHF NX1000 8 3 PANEL DESCRIPTION 3.1 Front, top and side panels 1. External audio jack 2. LCD display 3. POWER SWITCH/CANCEL button. Press and hold to turn pow er ON and OFF. Cancel current task with a short press on this button. 4. UP button select an operation channel.
VHF NX1000 9 11. . MENU button . Press MENU to access more functions and the preference settings. Display shows D/WA TCH , Use UP or DOWN button to select a preference function. Press to confirm you selection. To exit current menu mode, press the CANCEL button or press CH16 button.
VHF NX1000 10 4 FUNCTION DISPLAY 1. TEXT AREA All the menus or settings are displayed when it is under the menu. Also show the status of this transceiver.
VHF NX1000 11 5 BASIC OPERATION 5.1 Channel selection 5.1.1 Channel 16 Channel 16 (the distress and hailing c hannel) is used for establishing initial contact with other stati ons and for emergency communications. Channel 16 is automatically moni tored during both dual-w atch.
VHF NX1000 12 Weather channels for USA Weather channels for Canada 5.2 Normal channel selection Press / to select the operating channel. Each press on selects the next higher channel number. Each presses on selects the next lower channel number. When the key is held down, the channel changes at the rate of 12 channels per second.
VHF NX1000 13 5.4 Receiving and transmitting Turn on the radio and set the VO LUME and SQUELCH at suitable levels. 5.4.1 Receiving When radio is receiving signals, “BUSY” appears at the top of the LCD.
VHF NX1000 14 IMPORTA NT: To maximize the readability of your transmitted signal, pause a few seconds after pushing [PTT], hold the microphone 5 to 10 cm from your mouth and speak in to the microphone at a normal voice level. NOTE: The transceiver has a power save function to conserve the battery pow er.
VHF NX1000 15 Locked How to unlock Unlocked 6.3 Automatic backlight function If backlight is set to ON, a press on any key , will activate the backlight for 5 seconds. To turn the backlight continuously OFF, press to access MENU, and select LIGHT by pressing / .
VHF NX1000 16 7 TROUBLE SHOOTING Problem Possible Cause Solution The transceiver does not turn ON. 1. The battery is exhausted. 1. exchange the batteries. No sound from speaker. 1. Squelch level is too deep. 2. Volume level is too low. 3. Speaker has been exposed to water.
VHF NX1000 17 • Modulation system: Variable reactance frequency modulation • Adjacent channel power: 70 dB • Spurious emissions: Less than 0.25 μ W • Frequency Deviation: 5 KHz max peak • Audio Frequency Response: +1/ -3dB of +6dB/octave Pre- emphasis 300-3000Hz 8.
VHF NX1000 18 9 DECLARATION OF CONFORMITY.
VHF NX1000 19.
VHF NX1000 20 10 WARRANTY.
VHF NX1000 21.
VHF NX1000 22 This equipment is intended for use in: AUT √ EST √ HUN √ LUX √ SLA √ BEL √ FIN √ IRL √ MAL √ SLE √ CZR √ FRA √ ITA √ NET √ SPN √ CYS √ GER √ LAT √ POL.
VHF NX1000 23.
VHF NX1000 24 Copyright ©: Nexus Marine AB Kuskvägen 4, 191 62 Sollentuna, Sweden Tel: +46 -(0) 8 – 506 939 00. Fax: +46 -(0) 8 -506 939 01 www.n e xu s m ar i n e.
An important point after buying a device Nexus 21 NX1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nexus 21 NX1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nexus 21 NX1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nexus 21 NX1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Nexus 21 NX1000 will certainly help you make a decision on the purchase.
If you already are a holder of Nexus 21 NX1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nexus 21 NX1000.
However, one of the most important roles played by the user manual is to help in solving problems with Nexus 21 NX1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nexus 21 NX1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
