Instruction/ maintenance manual of the product fet 80R (i) Neumann.Berlin
Go to page of 4
Neumann-Information 1841 NOV. I 984 Operation of NEUMANN fet 80R(i) microphones in conjunction with unba- lanced or Center tap grounded inputs The microphones of the fet 80 R (i) series are Phantom powered from 48 Vdt according to IEC 268-15A/DIN 45, 596.
2. Microphone and power supply may be converted to unbalanced Operation in the field through a minor alteration. This Change is recommebded if the microphone is to be used exclusively with unbalanced inputs such as semi-professional or home equipment.
Far microphones equipped with connectors per DIN 41524 (Binder, Mini- Tuchel), the following changes are necessary: 1. Wire heretofore soldered to pin 3 (-1 is to be resoldered to pin. 2 without removing the wire already connected there. 2. Wire heretofore connected to pin 1 (+> is to bt-: resoldered to pin 3.
Audio Modulation cable to the amplifier, tape recorder etc. equipped with unbalanced input: i DIN‘L152L 1 Switchcraft w Modulation Schirm Shield Fig.
An important point after buying a device Neumann.Berlin fet 80R (i) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Neumann.Berlin fet 80R (i) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Neumann.Berlin fet 80R (i) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Neumann.Berlin fet 80R (i) you will learn all the available features of the product, as well as information on its operation. The information that you get Neumann.Berlin fet 80R (i) will certainly help you make a decision on the purchase.
If you already are a holder of Neumann.Berlin fet 80R (i), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Neumann.Berlin fet 80R (i).
However, one of the most important roles played by the user manual is to help in solving problems with Neumann.Berlin fet 80R (i). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Neumann.Berlin fet 80R (i) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
