Instruction/ maintenance manual of the product SE-DVI-2 Network Technologies
Go to page of 7
MAN068 Rev Date 5/24/2006 SE-DVI-2 2 Port DVI Video Switch Installation and Operation Manual V IDMUX ® Series NETWORK TECHNOLOGI ES INCORPORATE D Te l:33 0-5 62 -70 70 Fax :33 0-5 6 2-1 999 1275 D an ner D r Aurora, OH 44202 www.
i MAN0068 Rev Date5/24/2006 TRADEMARK VIDMUX is a registered trademark of Net work Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2006 by Net work Technologies Inc.
ii MAN0068 Rev Date5/24/2006 TABLE OF CONTENTS Introduct ion ...................................................................................................................................................................... 1 Materials ...........
NTI VIDMUX Series 2-Port DVI Video S witch 1 INTRODUCTION The VIDMUX Series SE-DVI-2 (VIDMUX) is a 2-port DVI vide o s w itch that enables two video sources such as a PC or HDTV tuner to share one DVI monitor using DVI-I or DVI-D single-link connectors.
NTI VIDMUX Series 2-Port DVI Video S witch 2 INST ALLA TION The VIDMUX is a Plug-and-Play d evice with no speci al configur ation settings and easy installati on steps: 1. Before connecting the VIDMUX to the video sources, make sure the video sources and the monitor are turned OFF.
NTI VIDMUX Series 2-Port DVI Video S witch 3 4. Plug the 5VDC AC adapter into the po wer jack on the rear panel. 5. Power up the VIDMUX first. 6. Power up the monitor.
NTI VIDMUX Series 2-Port DVI Video S witch 4 TROUBLESHOOTING If the VIDMUX is not working properly, please look for a sol ution i n the list b elo w: PROBLEM: No video at all SOLUTION: Check cable connections on each vid eo so urce, monitor and the VIDMUX.
An important point after buying a device Network Technologies SE-DVI-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies SE-DVI-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies SE-DVI-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies SE-DVI-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies SE-DVI-2 will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies SE-DVI-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies SE-DVI-2.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies SE-DVI-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies SE-DVI-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
