Instruction/ maintenance manual of the product NTI UNIMUX UNIMUX-USBV-2 Network Technologies
Go to page of 16
MAN027 Rev Date 2/15/2007 UNIMUX-USBV -2 2-Port USB KVM Switch Installation and Operation Manual UNIMUX TM Series NETWORK TECHNOLOGI ES INCORPORATE D Te l:33 0-5 62 -70 70 Fax :33 0-5 6 2-1 999 1275 D an ner Dr Aurora, OH 44202 www.
MAN027 Rev Date 2/15/2007 TRADEMARK UNIMUX is a trademark of Net work Techno lo gi es Inc in the U.S. and other countries. COPYRIGHT Copyright © 2003-2007 b y Net work Technologies Inc.
MAN027 Rev Date 2/15/2007 TABLE OF CONTENTS INTRODUCTION ................................................................................................................... .......................................... 1 MATERIALS .......................
NTI UNIMUX 2-PORT USB KVM SWITC H 1 INTRODUCTION The UNIMUX-USBV-2 (formerly referred to as KEEMUX-USBV-2U) U SB KVM switch allows one user to access two USB CPUs with only one USB keyboard, USB mouse, and 1 5HD VGA monito r. Internal microprocessors allow both CPUs to boot simultaneously and error-free.
NTI UNIMUX 2-PORT USB KVM SWITC H 2 FEATURES AND FUNCTIONS 1. 5VDC - connection jack for the AC adapter 2. USB DEVICES - USB type A female receptacles- for connection of user USB device( s) 3. CPU Status/Mode LEDs - for visual indication of switch connection between the user and a specific CPU as well as mode status 4.
NTI UNIMUX 2-PORT USB KVM SWITC H 3 INST ALLA TION Connect User Devices 1. It is not necessary to turn OFF power to either of the CPUs that w ill be connected to the U NIMUX- USBV- 2 before connecting or disconnecting any cables.
NTI UNIMUX 2-PORT USB KVM SWITC H 4 Connect to a CPU 1. Using a USB-AB-x-MM cable connect the U SB type A devi ce port of a USB CPU to the USB t ype B port labeled "CPU 1" on the UNIMUX-USBV-2. 2. Using a VEXT-xx-MM connect the video port of the same U SB CP U connected in step 5 to the female 1 5HD p ort labeled 3.
NTI UNIMUX 2-PORT USB KVM SWITC H 5 P o w e r U p The UNIMUX-USBV-2 USB KVM switch can be po wered at any time. The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at po wer-ON it should be power ed after connecting to and po wering-ON the UNIMUX-USBV-2.
NTI UNIMUX 2-PORT USB KVM SWITC H 6 USING THE NTI SWITCH The NTI UNIMUX-USBV-2 can be operated by the CPU SELECT button on the side of t he s witch or by keyboard control.
NTI UNIMUX 2-PORT USB KVM SWITC H 7 Command Mode Function: Keystrok e: Increment Port Decrement Port Toggle Scan Mode ON and OFF Sets scan time-out period for each port.
NTI UNIMUX 2-PORT USB KVM SWITC H 8 Scan Mode Scan Mode is indicated by a flashing CPU p o rt LED. In Sc an Mode the switch scans back and forth between ports maki ng the CPU connected to the port with the flashing LED active. T hat connected port will remain active while in use.
NTI UNIMUX 2-PORT USB KVM SWITC H 9 KEYBOARD FEA TURES The keyboard configuration o f each CPU is saved in the NTI UNI MUX-USBV-2. For example, if the CPU attached to Port 2 had CAPS LOCK and NUM LOCK selected the last time that CPU was accessed, then they will automatic all y be set when that CPU is accessed again.
NTI UNIMUX 2-PORT USB KVM SWITC H 10 Figure 5- Keyboard configurations International Sun Keyboards The UNIMUX-USBV-2 can recognize internat ional layouts for Sun keyboards. In order to use an international Sun keyboard, follow this procedure: 1. Disconnect the CPU from the UNIMUX -USBV-2 2.
NTI UNIMUX 2-PORT USB KVM SWITC H 11 It is also possible to configur e the UNIMUX-USBV-2 to emulate a specific international S un keyb oard regardless of what actual keyboard is connected. This is recommended when the CPU needs the layo ut code (i.e. a SUN CPU) and the keyboard does n't have an explicit layout code (i.
NTI UNIMUX 2-PORT USB KVM SWITC H 12 TECHNICAL SPECIFICA TIONS USB Type B U SB Type A VGA Video Pin # Signal Pin # Signal Pin # Signal Pin # Signal 1 +VCC 1 +VCC 1 RED 9 NC 2 - DATA 2 - DATA 2 GREEN 1.
NTI UNIMUX 2-PORT USB KVM SWITC H 13 INDEX Broadcast Mode, 8 cables, 1 Command Mode, 6 country code, 11 CPUs supported, 1 devices supported, 1 hot plugged, 5 keyboard translations, 9 keyboards- intern.
An important point after buying a device Network Technologies NTI UNIMUX UNIMUX-USBV-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies NTI UNIMUX UNIMUX-USBV-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies NTI UNIMUX UNIMUX-USBV-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies NTI UNIMUX UNIMUX-USBV-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies NTI UNIMUX UNIMUX-USBV-2 will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies NTI UNIMUX UNIMUX-USBV-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies NTI UNIMUX UNIMUX-USBV-2.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies NTI UNIMUX UNIMUX-USBV-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies NTI UNIMUX UNIMUX-USBV-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
