Instruction/ maintenance manual of the product KEEMUX-P2 Network Technologies
Go to page of 12
KEEMUX-P2 (2-Port PS/2 KVM Switch) INSTALLATION / USER GUIDE MAN049 Rev Date 4/8/2004 KEEMUX ® Series.
WARRANTY INFORMATION The warranty period on this product (parts and labor) is t wo (2 ) years from the date of purc hase. Please contact Network Technologies Inc at (800) 7 42-8324 (800-RGB-TECH) in the US an d Canada or (330) 562-7070 ( worldwide) or at our website at http://www.
1 TABLE OF CONTENTS INTRO DUCTION ............................................................................................................................................................................... 1 MATERIALS .............................
2 FEATURES AND FUNCTIONS 1. CPU Status LEDs- for visual indication of connection b etween the user and a specific CPU. Also used for visual indication of switch mode status 2. CPU Select Switches- push to manually switch to a specific CPU 3. Remote- (optional) for connecti on of RMT-2-ST remote cont rol 4.
3 INSTALLATION 1. Turn OFF power to all CPUs that will be connected to t he NTI S witch before connecting or disconnecting any cables. WARNING! Damage to the CPU may result if power is not turned OF F before connecting or disconnecting cab les. 2. Connect PS/2 keyboard to “USER KEYBD” port on the rear panel of the switch.
4 Units with audio support (optional) Connect the 3.5mm plug from speakers to the 3.5mm jack labe led "AUD OUT". Attach SA-xx-MM audio cables (purchased separately) betwee n the audio port on each CP U and the 3. 5mm audio jacks marked "AUD 1" on the KEEMUX s witch.
5 Keyboard Control In order to control the switch with the keyboard, COMMAND Mode must be enabl ed. To enter/exit COMMAND Mode from the keyboard: Press COMMAND Mode When the COMMAND Mode is ON, all 3 .
6 Keyboard Features The keyboard configuration o f each CPU is saved in the NTI Swit ch. For example, if the CPU attached to Port 2 had CAPS LOCK and NUM LOCK selected the last time that CPU was accessed, t hen they will automaticall y be set when that CPU is accessed again.
7 ON OFF 1 2 3 4 5 6 7 8 Dipswitches The dipswitches located next to the RS232 c onnection (Fig. 8) are used to configure the baud rate and address of the KEEMUX. The default baud rate is 9600. The default address is 1. Use the charts below to change the baud rate and address a s needed.
8 RS232 Interface Test Program RS232 communication is configur ed using the RMTEST program, locate d on the supplied floppy disk. This soft ware allows a user to test the functions of an NTI KEEMUX or Multi-user/Multi-platform switch RS232 interface. The RMTEST program generates a main menu with the 3 selections described below: MAIN OPTIONS 1.
9 RS232 Port (DB-9 MALE) PIN SIGNA L FUNCTION 1 - No connection 2 RXD Receive dat a 3 TXD Transmit data 4 DTR Data terminal ready 5 GND Signal ground 6 DSR Data set ready 7 RTS Request to send 8 CTS C.
10 SERIAL NO.: DATE: INSPECTED BY: KEEMUX-P2 KEEMUX-P2-RMT KEEMUX-P2-AUD KEEMUX-P2-DV Man049 Rev. 4/8/04.
An important point after buying a device Network Technologies KEEMUX-P2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies KEEMUX-P2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies KEEMUX-P2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies KEEMUX-P2 you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies KEEMUX-P2 will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies KEEMUX-P2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies KEEMUX-P2.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies KEEMUX-P2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies KEEMUX-P2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
