Instruction/ maintenance manual of the product ETH-4X1 / 2X1 Network Technologies
Go to page of 10
ETH-4X1 / 2X1 (MANUAL ETHERNET SWITCH) INSTALLATION / USER GUIDE MAN023 Rev Date 6/28/2002 NT I NETWORK TECHNOLOGI ES INCORPORATE D Te l: 33 0-5 62 - 70 70 Fa x:3 30 - 562 -19 99 12 75 Da n ner Dr Auror a , OH 4 42 02 www.
1 Table of Contents Introducti on ........................................................................................................... 1 Glossary ..................................................................................................
2 Application Examples.
3 Materials Materials Supplied with this kit: • NTI ETH-4X1 / ETH-2X1 Manual Ethernet Switch • 120VAC or 240VAC -12VDC/.5A AC Adapter • This owner's manual Materials Not Supplied, BUT REQUI.
4 Features and Functions 1. Power- LED to indicate the ETH-4X1 Manual Ethernet Swit ch ha s power to operate 2. 12VDC .5A- female connection jack for the AC ad apter 3. Select Switches- (1-4)- for manual contro l of "COMMON" and user sele ctable ports (1-4) 4.
5 Installation 1. Position the ETH-4X1 Manual Ethernet Switch such that the ethe rn et cable from the COMMON , the AC adapter power cable, and the ethe rn et cables from the SELECTABLEs can reach the ETH-4X1 Man u al Ethernet Switch. 2. Connect one end of an ethernet cable to the COMMO N (See Fig.
6 Plug-in and Boot Up 1. Connect the AC adapter power connector to the 12VDC port on the ET H-4X1 Manual Ethernet Switch. Make sure the power connector is properly inserted.
7 Any terminal program can be used to control the switch, if that program support s the given parameters (example HyperTerminal in Windows, Norton Commander te rmina l in DOS).
8 Troubleshooting Each and every piece of every product produced by Network Technologies Inc is 100% tested to exactin g specifications. We make every effort to insure troubl e-free installation and operation of our pro du cts. If problems are encountered while installing thi s product, please look ov er the troubleshooting cha rt below.
9 Warranty Information The warranty period on this product (par ts and labor) is one (1) year from t he date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (33 0) 562 -7070 for information regarding repairs and/or returns.
An important point after buying a device Network Technologies ETH-4X1 / 2X1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies ETH-4X1 / 2X1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies ETH-4X1 / 2X1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies ETH-4X1 / 2X1 you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies ETH-4X1 / 2X1 will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies ETH-4X1 / 2X1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies ETH-4X1 / 2X1.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies ETH-4X1 / 2X1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies ETH-4X1 / 2X1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
