Instruction/ maintenance manual of the product CM-RK17 Network Technologies
Go to page of 20
MAN058 Rev Date 12/5/2008 CM-RK17 CM-WL17 CM-DT17 TFT/LCD MONITOR Installation and Operation Manual CRYSTALMON TM Series NETWORK TECHNOLOGI ES INCORPORATED Te l:33 0-5 62 -70 70 Fax : 33 0-5 6 2- 1 99 9 1275 D an ner Dr Au ro ra, OH 44 20 2 ww w.ne twor ktechi nc.
i MAN058 Rev Date 12/5/2008 TRADEMARK CRYSTALMON is a trademark of Network Techno logies Inc in the U.S. and other co untries. COPYRIGHT Copyright © 2005, 2008 by Net work Technologies Inc.
ii MAN058 Rev Date 12/5/2008 TABLE OF CONTENTS Introduction................................................................................................................... ................................................. 1 Overview ...............
iii MAN058 Rev Date 12/5/2008 TABLE OF FIGURES Figure 1- Mount CM -RK17 to a rack .............................................................................................. ................................. 6 Figure 2- Mount CM-WL17 to an arm or bracket .
NTI CRYSTALMON TFT/LCD M ONITOR 1 INTRODUCTION Overview The CRYSTALMON series TFT/LCD mo nitors provide the i ndustrial or commercial user with superi or picture quality, multiple video formats, and a stur dy industrial enclosure. It also offers several mounting options, as well a s the ability to integrate with existing NTI products.
NTI CRYSTALMON TFT/LCD M ONITOR 2 MA TERIALS Materials supplied with this kit: 9 NTI CRYSTALMON TFT/LCD Monitor 9 120 or 240VAC at 50 or 60Hz-12VDC/5 A via AC Adapter 9 Power Supply Holder 9 2- Cable clamps 9 4- #4-40 x 3/16” black Phillips-pan head screws 9 6 foot VGA cable-VEXT-6-MM (15HD male-mal e connectors) 9 6.
NTI CRYSTALMON TFT/LCD M ONITOR 3 PRECAUTIONS • Do not apply pressure to the display portion of t he CRYSTALMON because the LCD panel and backlight ca n be easily damaged. • Do not cover or block the vent hole s in the case. • Be sure to turn OFF the power supply before connect ing and disconnecting vide o source cable(s).
NTI CRYSTALMON TFT/LCD M ONITOR 4 FEA TURES AND FUNCTIONS Main Controls 1. Power Button - to turn the LCD and backlight ON and OFF. 2. Power LED - to indicate the power status of the monitor Green= Power On, Video Input OK Red= Suspend/Standby, or Input Out of Range 3.
NTI CRYSTALMON TFT/LCD M ONITOR 5 7. 12VDC Power Jack - for connection of AC adapter 8. DVI Video Port - DVI-D female- for connecting DVI type video source 9.
NTI CRYSTALMON TFT/LCD M ONITOR 6 INST ALLA TION Mounting Mount the CRYSTALMON as intended for the application. Rack Mount Secure the CRYSTALMON (model CM-RK1 7) to a rack usi ng appropriate hardware throug h the holes provided (see Fig. 1). Mount using at least two screws on ea ch side.
NTI CRYSTALMON TFT/LCD M ONITOR 7 Figure 2- Mount CM-WL17 to an arm or bracket Wall Mount- Direct-To-Wall If it is desired to mount the CRYSTALMON directly to the wall (model CM-WL17 ), two keyhole slots have been provided on the back of the CRYSTALMON for thi s purpose (see Fig.
NTI CRYSTALMON TFT/LCD M ONITOR 8 Power Suppl y Bracket A power supply bracket has bee n supplied for the convenient moun ting of the power supply for the CRYSTALMON. This bracket can be directly mounted to the CRYSTA LMON. Two possible mounting location s are shown in Fig.
NTI CRYSTALMON TFT/LCD M ONITOR 9 Power Up 1. Connect the AC adapter to the power jack on the CR YSTALMON. Make sure the power connector is fully inserted. 2. Plug the AC adapter into a power source and pres s the power button to power u p the CRYSTALMON.
NTI CRYSTALMON TFT/LCD M ONITOR 10 DISPLA Y FUNCTIONS The CRYSTALMON 17” monitor supp orts resolutions up to SXGA (1280x1 024) with a refresh rate at between 55 and 76Hz. The quality of the image on the LCD monitor is adjustable using an On Scre en Display (OSD) menu usi ng the control buttons on the CRYSTALM ON.
NTI CRYSTALMON TFT/LCD M ONITOR 11 OSD Control Menu The OSD (On Screen Displ ay) Menu enables the use r to sele ct the desired characteristics of the LCD displa y.
NTI CRYSTALMON TFT/LCD M ONITOR 12 Setup Menu Selecting the Setup menu will bring up a screen in which the user can adjust OSD POSITION-the position of the OSD m enus on the LCD di splay (position.
NTI CRYSTALMON TFT/LCD M ONITOR 13 SPEC IFICA TIONS LCD Display area………………………… ……..337.92mm (W)x270.336 (H) (17 in ch diagonal) Panel Type………………………………… TFT Active Number of Pixels .....................
NTI CRYSTALMON TFT/LCD M ONITOR 14 DIMENSIONS 16.5" 12.2" 3.7" FRONT VIEW SIDE VIEW CM-WL17 (ALSO APPLIES TO CM- DT17 WITHOUT DESKTOP S TAND SHOWN).
NTI CRYSTALMON TFT/LCD M ONITOR 15 TROUBLESHOOTING Problem Solution Power LED is OFF Check to see if AC adapter is fully inserte d Power LED is red Chec k connections of video source ca bles Make sure video sources are switched ON Power LED is green, but there's no pictu re Check to see if Horizontal Sync is out of range.
NTI CRYSTALMON TFT/LCD M ONITOR 16 W ARRANTY INFORMA TION The warranty period on this product (parts and labor) is t wo (2 ) years from the date of purc hase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562- 7070 or visit our website at http://www.
An important point after buying a device Network Technologies CM-RK17 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Network Technologies CM-RK17 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Network Technologies CM-RK17 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Network Technologies CM-RK17 you will learn all the available features of the product, as well as information on its operation. The information that you get Network Technologies CM-RK17 will certainly help you make a decision on the purchase.
If you already are a holder of Network Technologies CM-RK17, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Network Technologies CM-RK17.
However, one of the most important roles played by the user manual is to help in solving problems with Network Technologies CM-RK17. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Network Technologies CM-RK17 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
