Instruction/ maintenance manual of the product XETB10GM-100NAS NETGEAR
Go to page of 26
202-10376-01 January 2008 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA XET1001 W all-Plugged Ethernet Adapter User Guide.
ii v1.0, January 2008 © 2008 by NETGEAR, Inc. All rights reserved.. T echnical Support Please refer to the support informat ion card that shipped with your prod uct. By registering your product at http://www .netgear .com/r egister , we can provide you with faster expert te chnical support and timel y notices o f product and software upgrades.
v1.0, January 2008 iii (z.B. T estsender) kann jedoch gewisse n Beschränkungen unterlieg en. Lesen Sie dazu bitt e die Anmerkungen in der Betriebsanleitung.
v1.0, January 2 008 iv.
v v1.0, January 2008 Content s XET1001 W all-Plugged Ethernet Adapter User Guide About This Manual . ............. ................ ............. ................ ................ ............. ................ ..... 1 Conventions, Formats, and Scope .
vi v1.0, January 2008.
1 v1.0, January 2008 About This Manual The XET1001 W all-Plugged Ethern et Adapter User Guide describes how to install, configure, and troubleshoot the NETGEAR ® XET1001 W all-Plugged Ethernet Ad apter. The information in this manual is intended for readers with intermediate computer and Internet skills.
XET1001 Wall-Plugged Ethern et Adapter User Guide 2 v1.0, January 2008 • Scope. This manual is written for the XET1001 W a ll-Plugged Ethernet Ad apter according to these specifications. Product updates are available on the NETGEAR website at http://www .
XET1001 Wall-Plugged Etherne t Adapter User Guide 3 v1.0, January 2008 Package Content s The product package should contain the following it ems: • One or two XET10 01 85 Mbps W all-Plugged Et hernet Ad apters, depending on whether you purchased a single unit or a bundle.
XET1001 Wall-Plugged Ethern et Adapter User Guide 4 v1.0, January 2008 Front Panel S t atus Light s The front panel of the XET1001 con t ains status lights. Y ou can use them to verify co nnections. The table below desc ribes the lights on the front panel.
XET1001 Wall-Plugged Etherne t Adapter User Guide 5 v1.0, January 2008 How the PowerLine Adapter Fit s in Y our Network Y ou can use the XET1001 W all-Plugged Ethernet Ad apter to implement or extend .
XET1001 Wall-Plugged Ethern et Adapter User Guide 6 v1.0, January 2008 Connect an XET1001 to the Router 1. First, connect an XET1001 W all-P lugged Etherne t Adapter to a LA N port on the router so that the PowerLine network can access the Internet.
XET1001 Wall-Plugged Etherne t Adapter User Guide 7 v1.0, January 2008 a. Plug the blue Ethernet cable that came in the box into a LAN port on your router o r switch in your network. b. Plug the PowerLine adapter into an electrical outlet near the router .
XET1001 Wall-Plugged Ethern et Adapter User Guide 8 v1.0, January 2008 Connect other Ethernet PowerLine Adapters 1. Before plugging in your other PowerLine devi ces, take a note of the device password printed on the label on the back of each device. Y ou will need this password later if you want to change the PowerLine network password.
XET1001 Wall-Plugged Etherne t Adapter User Guide 9 v1.0, January 2008 T o install the PowerLine Encryption Utility , follow these steps: 1. Insert the Resour ce CD into a CD drive on the computer that is connecte d to your ro uter 1 . The CD starts automatically .
XET1001 Wall-Plugged Ethern et Adapter User Guide 10 v1.0, January 2008 2. Click Install Software, and the W elcome screen appears. 3. Click Next and follow the instructions on the scree n. 4. Enter your user name and organization and then click Next.
XET1001 Wall-Plugged Etherne t Adapter User Guide 11 v1.0, January 2008 5. Specify where the files will be saved on your computer: • Change. Choose the location. T ype a new folder name or select another location using the folder options and then click OK.
XET1001 Wall-Plugged Ethern et Adapter User Guide 12 v1.0, January 2008 Set Y our Network Password The fastest and most reliable way to set the network password is to set the password for a ll devices at once. T o do this, you need the device passwor d on the back label of each PowerLine device.
XET1001 Wall-Plugged Etherne t Adapter User Guide 13 v1.0, January 2008 e. Click Enter Password. f. Enter the password recorded from the label on the back of the selected PowerLine device. g. Click OK. h. Repeat this step for all devices that you want attached to you r netw ork.
XET1001 Wall-Plugged Ethern et Adapter User Guide 14 v1.0, January 2008 Add a Device to an Exis ting PowerLine Network T o add a device to a PowerLine network with the de fault network pas sword, all you need to do is plug the new device into a power outlet.
XET1001 Wall-Plugged Etherne t Adapter User Guide 15 v1.0, January 2008 T roubleshooting This chapter gives information abo ut troubleshooting your XET1 00 1 85 Mbps W all-Plugged Ethernet Adapter. After each problem description, instructions are provided to help you diagnose and solve the problem.
XET1001 Wall-Plugged Ethern et Adapter User Guide 16 v1.0, January 2008 If the Power LED sti ll does not come on, an d yo u have confirmed the power outlet is live, you have a hardware problem and should contact technical support.
XET1001 Wall-Plugged Etherne t Adapter User Guide 17 v1.0, January 2008 T echnical Specifications This section provides default settin gs and technical specifications for the XET1001 85 Mbps W all- Plugged Ethernet Adapter. Default Configuration Settings T echnical S pecifications T able 2-1.
XET1001 Wall-Plugged Ethern et Adapter User Guide 18 v1.0, January 2008 HomePlug Security DES (56 bit) Electromagnetic emmissions FCC Part 15 Class B; CE-EMC Class B Power and Safety UL Listed (UL 195.
v1.0, January 2008 1 Images/NetgearLogo.jpg @ 96 dpi i images/HDXB101_images_13April06.jpg @ 300 dpi i images/icon_pointer.gif @ 96 dpi 1 images/icon_warning.gif @ 200 dpi 1 images/icon_danger.gif @ 200 dpi 1 images/Fig2-1Front.jpg @ 96 dpi 4 images/Power_ai11_091304.
v1.0, January 2 008 2.
An important point after buying a device NETGEAR XETB10GM-100NAS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR XETB10GM-100NAS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR XETB10GM-100NAS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR XETB10GM-100NAS you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR XETB10GM-100NAS will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR XETB10GM-100NAS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR XETB10GM-100NAS.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR XETB10GM-100NAS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR XETB10GM-100NAS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
