Instruction/ maintenance manual of the product XAV2101 Netgear
Go to page of 25
350 East Plumeria Drive San Jose, CA 95134 USA March 2011 202-10816-01 v1.0 Powerline AV 200 Nano Adapter XAV2101 User Manual.
2 | Powerline AV 200 Nano Adapter XAV2101 ©2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc.
Contents | 3 Contents Chapter 1 Getting Started Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1. Getting Started | 4 1 1. Getting Started This chapter describes your Powerline AV 200 Nano Adapter XAV2101, and how your adapters can fit into a home network. For more information about the topics covered in this manual, visit the Support website at http://support.
Chapter 1. Getting Started | 5 Powerline AV 200 Nano Adapter XAV2101 Product Details The following figure shows the adapter in detail: Ethernet port Power LED Powerline LED Ethernet LED Reset Security Figure 2.
6 | Chapter 1. Getting Started Powerline AV 200 Nano Adapter XAV2101 Buttons Two buttons are located on the side of the adapter: • Security . After you plug in your new AV adapters, press the Security button for 2 seconds on both of the AV adapters.
Chapter 1. Getting Started | 7 Powerline AV 200 Nano Adapter XAV2101 Powerline Adapter in a Home Network You can use Powerline AV 200 Adapters to extend your Ethernet network anywhere in your home using your existing electrical power lines. Ethernet cables Here, an Ethernet cable connects the router to the Powerline network.
8 | Chapter 1. Getting Started Powerline AV 200 Nano Adapter XAV2101 To set up your Powerline network: 1. Make sure that your home router is up and running and that Ethernet wired connections are working. 2. Install the first Powerline adapter based on the installation instructions that came in the package.
Chapter 1. Getting Started | 9 Powerline AV 200 Nano Adapter XAV2101 You can use the security button to change the default encryption key and set a private encryption key instead. The default encryption key is HomePlugAV. 1. Verify that all the Powerline adapters to be configured are plugged in.
Chapter 2. Powerline Utility | 10 2 2. Powerline Utility This chapter explains how to install and use the Powerline Utility. The Powerline Utility works with many Powerline AV products. NETGEAR Powerline models XAV1004, XAV2001, and XAVN2001 are compatible and can share the same Powerline network.
Chapter 2. Powerline Utility | 11 Powerline AV 200 Nano Adapter XAV2101 Install the Powerline Utility This utility allows you to set your own unique Powerline network encryption key, and prioritize traffic passing through your Powerline network. All devices on a Powerline network can be managed from one computer.
12 | Chapter 2. Powerline Utility Powerline AV 200 Nano Adapter XAV2101 Powerline Utility Screen When launched, the Powerline Utility opens to a screen that shows all the devices in your Powerline network. • Click the image of the device that you want to manage.
Chapter 2. Powerline Utility | 13 Powerline AV 200 Nano Adapter XAV2101 Change the Name of a Powerline Device Powerline devices are identified by their model number and name. Any Powerline devices that are plugged in and connected are detected by the Powerline Utility, and are shown on the Powerline Utility main screen.
14 | Chapter 2. Powerline Utility Powerline AV 200 Nano Adapter XAV2101 Set the Powerline Encryption Key Powerline devices that share the same Powerline network have to use the same encryption key.
Chapter 2. Powerline Utility | 15 Powerline AV 200 Nano Adapter XAV2101 2. Select the check box for each device for which you want to set the encryption key. 3. In Step 2 on your screen, select the option that you want: • Create a new Encryption Key .
16 | Chapter 2. Powerline Utility Powerline AV 200 Nano Adapter XAV2101 Add a Device to a Powerline Network If you are adding a device to a Powerline network, and the network encryption key has been left at its default setting, all you need to do is plug the new device into a power outlet.
Chapter 2. Powerline Utility | 17 Powerline AV 200 Nano Adapter XAV2101 responsive to database applications, give priority to this type of application over multimedia applications.
18 | Chapter 2. Powerline Utility Powerline AV 200 Nano Adapter XAV2101 4. To set the traffic prioritization rule for the selected Powerline AV Ethernet Adapter device, click Priority and specify the priority in the QoS Setup section of the screen. 5.
Appendix | 19 3 3. Troubleshooting Basic Functioning After you plug in the Powerline adapter, the following sequence of events should occur: 1. The Power LED lights up. 2. After approximately 10 seconds, verify that: a. The Power LED is solid green. b.
20 | Appendix Powerline AV 200 Nano Adapter XAV2101 • Amber . Power saving mode occurs when the Ethernet LED is off. This can occur when: - The Ethernet cable is unplugged. - The device connected through the Ethernet cable is turned off. - The adapter is idle for 10 minutes.
Appendix A. Supplementary Information | 21 A A. Supplementary Information Technical Specifications Feature Specification Data and routing protocols IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-Tx) AC input 100-240V~, 0.2A (Max) Power consumption Normal: 4W, Power saving mode: <1W Dimensions Height: 67 mm Width: 55 mm Depth: 34 mm Weight 0.
22 | Appendix A. Supplementary Information Powerline AV 200 Nano Adapter XAV2101 Safety Information Follow these safety guidelines to ensure your own personal safety and to help protect your system from potential damage. • Do not service any product except as explained in your system documentation.
Appendix B. Notification of Compliance | 24 B B. Notification of Compliance NETGEAR Powerline Products Safety Instructions and Precautions WARNING! Use the following safety guidelines to ensure your own personal safety and to help protect your product from potential damage.
Appendix B. Notification of Compliance | 25 Powerline AV 200 Nano Adapter XAV2101 The voltage and current rating of the cable should be greater than the ratings marked on the product. • To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets.
26 | Appendix B. Notification of Compliance Powerline AV 200 Nano Adapter XAV2101 FCC Declaration Of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the Powerline AV 200 Nano Adapter XAV2101 complies with Part 15 of FCC Rules.
An important point after buying a device Netgear XAV2101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Netgear XAV2101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Netgear XAV2101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Netgear XAV2101 you will learn all the available features of the product, as well as information on its operation. The information that you get Netgear XAV2101 will certainly help you make a decision on the purchase.
If you already are a holder of Netgear XAV2101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Netgear XAV2101.
However, one of the most important roles played by the user manual is to help in solving problems with Netgear XAV2101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Netgear XAV2101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
