Instruction/ maintenance manual of the product WG302V2 NETGEAR
Go to page of 8
202-10146-01 May 2006 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA NETGEAR ProSafe 802.1 1g Wireless Access Point WG302v2 Reference Manual.
ii v1.0, May 2006 T echnical Support Please register to obtain technical support. Please retain your proof of purchase and warranty information. T o register your product, get product support or obtai n product information and product documentation, go to http://www .
v1.0, May 2006 iii FCC St atement FCC Requirement s for Operation in the United St ates Radio Frequency In terfe rence W arnings & Instructions NOTE: This equipment has been tested and found to comp ly with the limits for a Class B dig ital device, pursuant to Part 15 of the FCC Rules.
v1.0, May 20 06 iv Failure to follow these guidelines can resu lt in significant performance degradation or inability to wirelessly connect to the wireless access point.
v1.0, May 2006 v Europe – EU Declaration of Conformity Marking by the above symbol indicates compliance with th e Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC).
v1.0, May 20 06 vi Countries of Operation & Conditions of Use in the European Community This device is intended to be operated in all countries of the European Comm unity . Requirements for indoor vs. outdoor operation, license requirements and allowed channels of operation apply in some c ountries as described below .
v1.0, May 2006 vii Antenna St atement for the European Community Please note that the 100mW EIRP limit and regulat ions could vary in Europe from c ountry to country . Please check the regulations in your country . The antenna cable type and length must comply with Eur opean regulations.
v1.0, May 20 06 viii Bestätigung des Herstellers/Importeurs Es wird hiermit bestätigt, daß da s ProSafe 802.1 1g W ireless Access Poin t gemäß der im BMP T -AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmun gen entstört ist. Das vorschriftsmäßige Betrei ben einiger Geräte (z.
An important point after buying a device NETGEAR WG302V2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR WG302V2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR WG302V2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR WG302V2 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR WG302V2 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR WG302V2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR WG302V2.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR WG302V2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR WG302V2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
