Instruction/ maintenance manual of the product RT338 RT338 RT338 NETGEAR
Go to page of 11
.
Model RT338 ISDN Router Installation Guide Congratulations on your purchase of a NETGEAR ™ Model R T338 ISDN Router . This document provides instructions to get you connected to an ISDN Internet service line using the NETGEAR Model R T338 router and your personal computer .
Model RT338 ISDN Router Installation Guide Rear P anel Refer to this diagram to identify all the ports on the router when you attempt to make an y connections. Refer to the follo wing illustration and steps when connecting the router . T o connect your router: 1.
Model RT338 ISDN Router Installation Guide 2. Connect the analog devices to the phone ports (Phone 1 and Phone 2, respecti vely). 3. Connect the ISDN line from the r outer to the ISDN wall connection. Use the black cable that is pro vided. 4. Connect a network manager workstation to the RS-232 port.
Model RT338 ISDN Router Installation Guide All PCs must also hav e other IP con fi guration information, including a subnet mask, a domain name server (DNS) address, and a def ault gate way address. This information is also assigned automatically by the Model R T338 router whene v er a PC reboots.
Model RT338 ISDN Router Installation Guide Configuring Windows 95 or Windo ws 98 f or IP Networking All PCs must hav e an Ethernet adapter card installed and TCP/IP as their protocol.
Model RT338 ISDN Router Installation Guide V erifying TCP/IP Properties After your PC has been con fi gured and rebooted, check the TCP/IP con fi guration using the W indows 95 and W indows 98 utility winipcfg.e xe . For W indows NT systems, use ipconfig.
Model RT338 ISDN Router Installation Guide 10. W ait f or the ISDN test to complete. If the ISDN test fails, recheck your ISDN setup information and the physical connection. Refer to “ T roubleshooting Information ” below . 11. Enter y our ISP account information.
Model RT338 ISDN Router Installation Guide ISDN connection test fails: • Check that you entered the directory numbers in a correct format. Do not enter the area code unless it is required. • Recheck your directory numbers, SPIDs, and switch type (North America only).
Model RT338 ISDN Router Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. T rademarks NETGEAR ™ is a trademark of NETGEAR, Inc. W indows ® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of their respecti ve holders.
NETGEAR, Inc. 4500 Great America Parkwa y Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: suppor t@NETGEAR.com http://www .NETGEAR.com * M1-RT338NA-3*.
An important point after buying a device NETGEAR RT338 RT338 RT338 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR RT338 RT338 RT338 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR RT338 RT338 RT338 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR RT338 RT338 RT338 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR RT338 RT338 RT338 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR RT338 RT338 RT338, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR RT338 RT338 RT338.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR RT338 RT338 RT338. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR RT338 RT338 RT338 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
