Instruction/ maintenance manual of the product PL1200-100PES Netgear
Go to page of 12
Quick S t ar t P ow erline 1200 Model PL1200.
2 P ack age Cont ents In some r egions, a resour ce CD is included with your pr oduc t..
3 Getting St ar t ed P owerline adapters give you an alt ernative way t o ext end your network using your existing electrical wiring. Plug two or mor e P owerline adapters into electrical outlets t o creat e a wired ne twork connection. Y ou c an add up to 16 Homeplug A V-certified and A V2-certified adapters t o extend your network.
4 Powe r LE D F actory Re set button Ethernet port Pick A P lu g LED Ethernet LED Security button Meet Y our Adapt er Bef ore you inst all your adapter , f amiliarize yourself with its LEDs, buttons, and port .
5 P ower LED Solid green . The electrical pow er is on. Blinking amber . The adapter is in pow er saving mode. Blinking green . The adapt er is in the proc ess of setting up security. O . The adapter is no t rec eiving electrical power . Ethernet LED Solid .
6 Ethernet port Connect your wired devic es, including computers, Wifi r outers or game consoles, t o your Powerline ne twork . Security button Use the Security button to cr eate a secur e P owerline network.
7 Install Y our Adapt ers Room 1 Room 2.
8 Secur e Y our Network ¾ T o creat e a secure network: 1. Plug in your adapters. 2. W ait until the Pick A Plug LEDs are blinking. 3. Pr ess the Security button on one of the adapt ers f or two seconds, then pr ess the Securit y button on one of the o ther adapters in your existing ne twork for two sec onds.
9 Add Adapt ers T o add adapters bef or e you configur e the security featur e, just plug them in and connect the adapters t o your equipment . ¾ T o add an adapter t o a P owerline network with security set : 1. Plug in and connect the new adapters.
10 T roubleshooting T ips P ower LED is o . Make sur e that power is supplied t o the elec trical outlet , and that the P owerline devices ar e not plugged into an e x tension c ord, pow er strip, or surge pr ot ec tor . P ower LED is blinking amber .
11 Ethernet LED is o . • Make sur e that the Ethernet cables ar e working and secur ely plugged into the devices. • Pr ess the Factory Reset butt on on each device f or one second to r eturn the P owerline adapt er to its factory def ault settings.
May 2015 NETGEAR Inc. 350 East Plumeria Drive San Jose, CA 95134, USA 201-19270-01 Support Thank you f or pur chasing this NETGEAR pr oduc t . Aer installing your devic e, locate the serial number on the label of your pr oduct and use it to r egister your pr oduct at https ://my .
An important point after buying a device Netgear PL1200-100PES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Netgear PL1200-100PES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Netgear PL1200-100PES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Netgear PL1200-100PES you will learn all the available features of the product, as well as information on its operation. The information that you get Netgear PL1200-100PES will certainly help you make a decision on the purchase.
If you already are a holder of Netgear PL1200-100PES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Netgear PL1200-100PES.
However, one of the most important roles played by the user manual is to help in solving problems with Netgear PL1200-100PES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Netgear PL1200-100PES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
