Instruction/ maintenance manual of the product FSM7352S NETGEAR
Go to page of 24
© 2005 by NETGEAR, Inc. All rights reserved. Trademarks © 2005 NETGEAR, Inc. NETGEA R ® , the N etgear Logo, the Gear Guy, and Everybody’s connecting are tr ademarks or registered tra de mark of Netgear, Inc. in the United States and/or other countries.
Warning: This is a Class A product. In a domestic envir onment, this product may cause radio interference , in which case th e user may be required to t ake appropriate measures.
CONTENTS CHAPTER 1: INTRODUCTION ............................................................................................................................... 5 Overview ...............................................................................
Figures FIGURE 1-1. PACKAGE CONTENTS ............................................................................................................................... .................. 8 FIGURE 2-1. FRONT PANEL OF THE FSM7352S LAYER 3 MANAGED STACKABLE FAST ETHERNET SWITCH .
CHAPTER 1: INTRODUCTION Congratulations on your purchase of a NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch! Your NETGEAR Switch is a state- of-the-art, high-performance, IEEE-.
Features The following list identifies the key features of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. • Forty-eight 10/100Mbps and four 10/100/100 Mbps auto sensing F.
o Full-duplex IEEE 802.3x pause frame flow control • Multiple interfaces to access the management features o Browser-based Graphical User Interface (GUI) o Command Line Interface (CLI) o Telnet or C.
Figure 1-1. Package Contents Verify that your packag e contains the following: FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch Rubber footpads for tabletop installation Rubber caps for the 4 S.
CHAPTER 2: PHYSICAL DESCRIPTION This chapter describes the hardware features of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch.
establish a link with non-stacking inte rfaces no traffic will pass across the i nterface. These interfaces are available to quickly and easily build a stack of switches by simply connecting two or more FSM7300 switches together with either Category 5 copper Ethernet cables or with SFP-based fiber connections.
LED Descriptions The front panel of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet SFP ports also have LEDs that show link and activity status.
The console port is configured to use the following settings: • Baud rate: 9,600 bps • Data bits: 8 • Parity: none • Stop bit: 1 • Flow control: none These settings appear below the connector on the switch fr ont panel.
CHAPTER 3: INSTALLATION This chapter describes the installatio n procedures for your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch.
Step 2: Installing the Switch You can install your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads.
1. Connect the female end of the supplied AC power adapter cable to the power receptacle on the back of the switch. 2. Connect the 3-pronged end of the AC power adapter cable to a grounded 3-pronged AC outlet. When you apply power, the Power LED on the switch’s front panel will be Yellow, as it conducts a Power On Self Test (POST).
To install additional Gigabit Ethernet module, repeat this procedure Figure 3-3. Installing a Gigabit Ethernet fiber Module into an FSM7352S Step 7: Connecting to the Console Port to Manage the S witch (ini tial configuration) To learn the IP address, you must first access the Command Line management via the console interface.
Figure 3-4. System Information. 5. The login name is “admin”. And there is no password assigned. We strongly recommend you enable password for admin access to secure access to the switch management function. After successful login, the screen should show (FSM7352S)> prompt.
Sysinfo page. To use your web browser, simply type t he IP address in the URL address bar and hit enter. If you want to use an SNMP management application, y ou will need to note the IP address and to configure the SNMP settings in your switch so that it will respond to SNMP requests.
APPENDIX A: TECHNICAL SPECIFICATIONS This appendix provides technical specifications fo r the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Network Protocol and Standards Compatibility IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.
Secured Shell (SSHv1,v2) Interface 48 RJ-45 connectors for 10BASE-T and 100BASE-TX (Auto Uplink™ on all ports) 4 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports) 4 Gigabit Interface Converter (SFP) slots for SFP modules RS-232 Console Port LEDs Per port (10/100 for TP): Link, Speed, and Activity.
EN 55024 Safety CE mark, commercial CSA certified (CSA 22.2 #950) UL listed (UL 1950)/cUL IEC950/EN60950 Page 21 of 24.
APPENDIX B: TROUBLESHOOTING This chapter provides information about troubl eshooting the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Topics include: Troubleshooting chart Additional troubleshooting suggestions Troubleshooting Chart Table B-1 lists symptoms, causes, and solutions of possible problems.
Configuration If problems occur after altering the network configuration, restore the original connections and det ermine the problem by implementing the new changes, one step at a time. Make sure that cable distances, repeater limits, and other physical aspects of the in stallation do not exceed the Ethernet limitations.
APPENDIX C: Default Settings This appendix provides the default settings for the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch.
An important point after buying a device NETGEAR FSM7352S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR FSM7352S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR FSM7352S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR FSM7352S you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR FSM7352S will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR FSM7352S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR FSM7352S.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR FSM7352S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR FSM7352S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
