Instruction/ maintenance manual of the product EN104TP NETGEAR
Go to page of 14
.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Congratulations on your purchase of the NETGEAR ™ Model EN104 TP , Model EN106 TP , or Model EN108 TP Ethernet hub . The hubs deli ver standards-based, plug-and-play networking solutions for small b usinesses, home of fices, and lo w- density workgroups of lar ger companies.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide V erify that your package contains the follo wing: • Model EN104 TP hub , Model EN106 TP hub, or Model EN108 TP hub • Mounting kit (fo.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Vista 10B ASE-T Network P or ts with Built-in LEDs The front panel of the Model EN104 TP hub has four RJ-45 10B ASE-T ports, the Model EN106 TP hub has six RJ-45 10B ASE-T ports, and the Model EN108 TP hub has eight RJ-45 10B ASE-T ports.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide LEDs The table belo w describes the activity of the LEDs. Normal/Uplink Push Button The Normal/Uplink push button allo ws you to select Normal (MDI-X) wiring for direct PC connection.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Before you begin installing your hub, prepare the installation site. Mak e sure your operating en vironment meets the operating en vironment requirements of the equipment. T o install your hub on a fl at surface, you do not need any special tools.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Y ou can connect PCs, Apple Macintosh computers, UNIX w orkstations, or any de vice equipped with a 10B ASE-T Ethernet interface to the RJ-45 ports on your hub by using twisted pair Ethernet cables.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Cascading refers to connecting hubs together to increase the number of ports or the number of users supported on the network.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Cascade the Hub The follo wing illustration shows cascading hubs together in a hierarchical star through the 10B ASE-T ports and indicates the setting of the Normal/Uplink push button on each hub .
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide T o complete the installation, connect the po wer cord fi rst to the po wer receptacle on the hub rear panel and then to the po wer outlet on the wall. When power has been applied to the hub: • The green Pwr (Po wer) LED on the front panel is on.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide Hub Integrity If required, verify the inte grity of the hub by resetting it. T urn po wer to the switch of f and then back on. If the problem continues and you have completed all the preceding diagnoses, contact NETGEAR Customer Support.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide General Specifications Network Pr otocol and Standards Compatibility IEEE 802.3i, 10BASE-T Ethernet Data Rate 10 Mbps, Manchester encoded.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide © 2000 by NETGEAR, Inc. All rights reserved. T rademarks NETGEAR ™ is a trademark of NETGEAR, Inc. W indo ws ® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of their respecti ve holders.
NETGEAR, Inc. 4500 Great America Parkwa y Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: suppor t@NETGEAR.com http://www .NETGEAR.com *M-EN100TPNA-4* *M-EN100TPNA-4*.
An important point after buying a device NETGEAR EN104TP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR EN104TP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR EN104TP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR EN104TP you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR EN104TP will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR EN104TP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR EN104TP.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR EN104TP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR EN104TP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
