Instruction/ maintenance manual of the product 208-10026-01 NETGEAR
Go to page of 30
208-10026-01 2006-2 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA ADSL Modem Router Setup Manual.
ii v1.1, 2006-2 © 2006 by NETGEAR, Inc. All rights reserved. T rademarks NETGEAR is a trademark of Netgear , Inc. Microsoft, W indows, and W indows NT are registered trademarks of Microsoft Corporation. Other brand and product names are register ed trad emarks or tradema rks of their re spective holders.
1 v1.1, 2006-2 Content s ADSL Modem Router Setup Manual Chapter 1 Connecting the Route r to the Internet What’s in the Box? .............. ................ ................ ................ ................ ................ ............ 1- 1 The Router ’s Front Panel .
2 v1.1, 2006-2 T esting the Path from Y our Computer to a Remote Device ................ ................ ..... 2-8 Restoring the Default Configur ation and Password ...... ... ... ... .... ... ... ... .... ... ... ... ... .... ... ... .. 2-9 Using the Reset Button .
Connecting the Router to the Internet 1-1 v1.1, 2006-2 Chapter 1 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describe s how to set up your AD SL modem router for Internet access and configure basic wireless connectivity .
ADSL Modem Ro uter Setup Ma nual 1-2 Connecting the Router to the Internet v1.1, 2006-2 The Router’ s Front Panel The ADSL modem router front panel shown below contains status LEDs. Y ou can use the LEDs to verify various conditions. Ta b l e 1 -1 describe s each LED.
ADSL Modem Router Setup Manual Connecting th e Rou te r to the Internet 1-3 v1.1, 2006-2 The Router’ s Rear Panel The rear panel of the ADSL modem router contains port connections. V i ewed from left to right, the rear panel contains the following elements: 1.
ADSL Modem Ro uter Setup Ma nual 1-4 Connecting the Router to the Internet v1.1, 2006-2 Internet Configuration Requirement s Depending on how your ISP set up your Internet account, you need one or mor.
ADSL Modem Router Setup Manual Connecting th e Rou te r to the Internet 1-5 v1.1, 2006-2 1. Locate the ADSL settings in formation your Internet service provider gave you. 2. Insert the NETGEAR CD into a W indows PC. The CD will automatically start and detect the language you are using on your PC.
ADSL Modem Ro uter Setup Ma nual 1-6 Connecting the Router to the Internet v1.1, 2006-2 ADSL Microfilter Each device such as a telephone, fax machine, answering machine, or caller ID display will require an ADSL microfilter .
ADSL Modem Router Setup Manual Connecting th e Rou te r to the Internet 1-7 v1.1, 2006-2 1. Install ADSL filters on the phone lines. 2. Connect the router to the ADSL line. 3. Log in to the router. 4. Connect to the Internet. Follow the steps below to connect your router to your network.
ADSL Modem Ro uter Setup Ma nual 1-8 Connecting the Router to the Internet v1.1, 2006-2 b. T wo-Line Filter Example . Insert the two-line filter into the phone outlet and connect the phone to the phon.
ADSL Modem Router Setup Manual Connecting th e Rou te r to the Internet 1-9 v1.1, 2006-2 2. Connect the ADSL modem rout er to the ADSL filter . a. Using the included phone cable with RJ-1 1 jacks, connect the ADSL port ( B) of the ADSL modem router to the ADSL port ( C) of the two-line filter .
ADSL Modem Ro uter Setup Ma nual 1-10 Connecting the Router to the Intern et v1.1, 2006-2 b. Connect the Ethernet cable ( D) from a ADSL mo dem router LA N port to the Ethernet adapter in your computer . c. Connect the power adapter to the router and plug it in to a power outlet.
ADSL Modem Router Setup Manual Connecting th e Rou te r to the In te rn et 1-11 v1.1, 2006-2 a. T ype http://192.168.0.1 in the address field of a browser such as Internet Explorer or Netscape ® Navigator . This login window opens: Enter admin for the user name and password for the password, both in lower case letters.
ADSL Modem Ro uter Setup Ma nual 1-12 Connecting the Router to the Intern et v1.1, 2006-2 Y ou are now ready to co nfigure your ADSL modem router to connect to the Inte rnet. There are two ways you can configure y our ADSL mode m router to connect to the Internet: a.
Troubleshooting 2-1 v1.1, 2006-2 Chapter 2 T roubleshooting This chapter gives informatio n about troubleshooting y our ADSL modem router. After each problem description, instructions ar e provided to help you dia gnose and solve the problem. For the common problems listed, go to the section indicated.
ADSL Modem Ro uter Setup Ma nual 2-2 Troubleshooting v1.1, 2006-2 b. The LAN port LEDs are lit for any local ports that are connected. c. The ADSL Internet port LED is lit. If a port’ s LED is lit, a link has been establis hed to the connected device.
ADSL Modem Router Setup Manual Troubleshooting 2-3 v1.1, 2006-2 LAN or ADSL Intern et Port LEDs Not On If either the LAN LEDs or ADSL Internet LED do not light when the Ethern et connection is made, check the following: • Make sure that the Ethernet cable connections are secure at the router and at the hub or workstation.
ADSL Modem Ro uter Setup Ma nual 2-4 Troubleshooting v1.1, 2006-2 • Make sure you are using th e correct login in fo rmation. The factory de fault login name is admin and the password is password . Make sure that CAPS LOCK is off when entering this information.
ADSL Modem Router Setup Manual Troubleshooting 2-5 v1.1, 2006-2 If disconnecting telephones does no t result in a green ADSL Internet LED, there may be a problem with your wiring. If the telep hon e co mp any has te sted the ADSL signal at your Network Interface Device (NID), then you may have po or quality wiring in your house.
ADSL Modem Ro uter Setup Ma nual 2-6 Troubleshooting v1.1, 2006-2 V erify with your ISP the Multiplexing Method and parameter value, and update the router’ s ADSL Settings accordingly . • Y ou r ISP may require a login program. Ask your ISP whether they require PPP over Ethernet (PPP oE) or PPP over A TM (PPPOA) login.
ADSL Modem Router Setup Manual Troubleshooting 2-7 v1.1, 2006-2 If you cannot connect afte r sev eral min utes, you may be using an incorrect Service Name, User Name or Password.
ADSL Modem Ro uter Setup Ma nual 2-8 Troubleshooting v1.1, 2006-2 1. From the W indows toolbar , click the S tart button and select Run. 2. In the field provided, type Ping followed by the IP address of the router , as in this example: ping 192.168.0.
ADSL Modem Router Setup Manual Troubleshooting 2-9 v1.1, 2006-2 — Check that your PC has the IP address of your router listed a s the default gateway . If the IP configuration of your PC is assigned by DHCP , this information will not be visible in your PC’ s Network Control Panel.
ADSL Modem Ro uter Setup Ma nual 2-10 Troubleshooting v1.1, 2006-2.
Technical Specifications A-1 v1.1, 2006-2 Appendix A T echnical S pecifications This appendix provides technical specifications for the ADSL modem router.
ADSL Modem Ro uter Setup Ma nual A-2 Technical Specifications v1.1, 2006-2.
Related Documents B-1 v1.1, 2006-2 Appendix B Related Document s This appendix provides links to reference documents you c an use to gain a more comple te understanding of the technolog ies used in your NETGEAR product. Document Link Internet Netw orking and TCP/IP Addressing http://documentation.
ADSL Modem Ro uter Setup Ma nual B-2 Related Documents v1.1, 2006-2.
An important point after buying a device NETGEAR 208-10026-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR 208-10026-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR 208-10026-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR 208-10026-01 you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR 208-10026-01 will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR 208-10026-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR 208-10026-01.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR 208-10026-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR 208-10026-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
