Instruction/ maintenance manual of the product Power Over Ethernet NPPOE1001 NetComm
Go to page of 16
.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 2 www.netcomm.com.au Contents Important Information ............................................................................................................................................... 3 What you should know about Power Over Ethernet (PoE) .
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 3 Important Information What you should know about Power Over Ethernet (PoE) Power -over-Ethernet (PoE) or "Active Ethernet" eliminates the need to run 240 V olt power to W ireless Access Points and other devices on a wired LAN.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 4 www.netcomm.com.au Introduction Thank you for purchasing NetComm’ s Power -over-Ethernet Adapter Kit. Before you start installing the Power -over-Ethernet Adapter Kit, verify the following parts are included in your package.
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 5 Installation This chapter describes the function of the Power -over-Ethernet Adapter Kit and shows how to install it on your network. Basic knowledge of networking is assumed. Read this chapter before you proceed.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 6 www.netcomm.com.au The POE Splitter PoE Splitters split data and power from the Cat5 Ethernet line. It will output Ethernet data to the device via the Etherent port and DC 5V/1.67A or 12V/1A power via the DC output cable.
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 7 Connecting the Power-over-Ethernet Adapter Kit The Power-over -Ethernet Adapter Kit does not need software configuration. T o install it, simply complete the following steps. Figure 2.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 8 www.netcomm.com.au Now you should see that power is provided to the device you have connected to the POE Splitter . If there is no power , please refer to the T roubleshooting section in this guide.
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 9 The following figure illustrates the connection of a Network Camera using Power Over Ethernet. Figure 5 Please Note: The tot al distance from the NB1300+4 ADSL Modem/Router to the Network Camera (as used in this example) should be less than 100 metres (i.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 10 www.netcomm.com.au Appendix A: Cable Connections This cable information is provided for your reference only . Please ensure you only connect the appropriate cable into the correct socket on either this product or your computer .
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 11 In a straight-through cable, wires 1,2,3,4,5,6,7 and 8 at one end of the cable are still wires 1~8 at the other end. In a crossover cable, the wires of 1,2,3,6 are reversed so that wire 1 become 3 at the other end of the cable, 2 becomes 6, and so forth.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 12 www.netcomm.com.au Appendix B: Troubleshooting The LEDs do not light up. Check that the power supply is properly connected. The Injector LED does not light up. First, refer to the installation instructions to ensure that you have connected the cables correctly .
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 13 Appendix C: Technical Specifications Standards IEEE 802.3, IEEE 802.3u, IEEE 802.
NetComm NPPOE1001 Power over Ethernet Kit YML720Rev1 14 www.netcomm.com.au Appendix D: Registering your NetComm Product All NetComm Limited (“NetComm”) products have a standard 12 month warranty f.
YML720 Rev1 NetComm NPPOE1001 Power over Ethernet Kit www.netcomm.com.au 15 Product Warranty The warranty is granted on the following conditions: 1. This warranty extends to the original purchaser (you) and is not transferable; 2.
NetComm is Australia’s dynamic data communications and networking solutions provider . For more information on this and other NetComm products, please visit ww w .netcomm.com.au NetComm Limited ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia.
An important point after buying a device NetComm Power Over Ethernet NPPOE1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NetComm Power Over Ethernet NPPOE1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NetComm Power Over Ethernet NPPOE1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NetComm Power Over Ethernet NPPOE1001 you will learn all the available features of the product, as well as information on its operation. The information that you get NetComm Power Over Ethernet NPPOE1001 will certainly help you make a decision on the purchase.
If you already are a holder of NetComm Power Over Ethernet NPPOE1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NetComm Power Over Ethernet NPPOE1001.
However, one of the most important roles played by the user manual is to help in solving problems with NetComm Power Over Ethernet NPPOE1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NetComm Power Over Ethernet NPPOE1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
