Instruction/ maintenance manual of the product IP DSLAM NetComm
Go to page of 71
Management User Guide IP DSLAM.
NetComm NCT240 Management Guide Release 1.0 T able of Content 1. INTR ODUCTION .............................................................................................................................. 5 1.1 F EA TURES ............................
NetComm NCT240 Management Guide Release 1.0 2.3.2 Ethernet Port Settin g ............................................................................................................. 22 2.3.3 MAC management ............................................
NetComm NCT240 Management Guide Release 1.0 Server ............................................................................................................................... ............... 42 Syslog ..............................................
NetComm NCT240 Management Guide Release 1.0 CONFIG: ............................................................................................................................... ............. 62 Save .................................................
NetComm NCT240 Management Guide Release 1.0 1. Introduction This document is intende d for First Office Acceptance test pl an for NetComm’ s ADSL2+ Broadband Access Switch solution (BAS) .
NetComm NCT240 Management Guide Release 1.0 T h e N CT 2 4 0 Ac ce s s s y st e m c on ta in s 2 4 A D S L2 /2 + c ir cu it s t o d el i v e r hi gh - s p ee d d a t a s er v i c e over twisted copper pa irs using indust ry standard Discrete Multi-Tone (DMT) line co ding technology.
NetComm NCT240 Management Guide Release 1.0 1.2 Basic operating information 1.2.1 Default username and Passwor d Username: admin Password: admin 1.2.2 Default IP addresses MGMT : (Management Ethernet port ) – 192.
NetComm NCT240 Management Guide Release 1.0 2. Configuring the Switch by Web Interface Log in 2.1 System 2.1.1 System Info This page displays the basic system information 8.
NetComm NCT240 Management Guide Release 1.0 2.1.2 System log When you enter to the syslog page the first function visible is enable and disable, default is enabled.
NetComm NCT240 Management Guide Release 1.0 2.1.3 SNMP setup This page is for configuring the built in SNMP agent, NCT240 support SNMP V2c SNMP set c o mmunity: SNMP get co mmunity : SNMP trap c ommunity and the T rap receiver IP address 2.
NetComm NCT240 Management Guide Release 1.0 Display and Edit General information Host Name : NCT240 Host name Location : NCT240 location Contact Person’ s Name: maintainer ’ s name Model: NCT240 model User T ime Server When Bootup: Select time service protocol during bootup.
NetComm NCT240 Management Guide Release 1.0 2.1.6 Synchroniz ation with T ime server (SNTP) 2.1.7 User Management Add, delete and Modify user information 2.
NetComm NCT240 Management Guide Release 1.0 2.1.9 Server services 2.1.10 Alarm This page is used for displaying cu rrent alarms and alarm history , Display current alarms or Alarm history , 2.
NetComm NCT240 Management Guide Release 1.0 2.1.12 Softwar e upgrade and Configuration backup Page for setting the FT P server settings Page for selecting w hich file to upgrade Page to back the files.
NetComm NCT240 Management Guide Release 1.0 2.2 ADSL 2.2.1 xDSL port setup Enable and Disable ADSL ports, m ap ADSL pr ofiles to each port individually , copy settings of one port to another port 2.
NetComm NCT240 Management Guide Release 1.0 Map ADSL profile, Alarm profile, ADSL m ode (and the annex) to ADSL ports 2.2.1.2 copy Settings to other ports 2.2.1.3 PVC Map (single and Multiple PVC setup) PVC can be set to a range of ports or to Individual ports using this page.
NetComm NCT240 Management Guide Release 1.0 2.2.1.4 PVC show The PVC profile of an individual port or a range of ports can be displayed using this page.
NetComm NCT240 Management Guide Release 1.0 2.2.2 Multiple port xDSL set up This page is used for configuring seve ral ports with the sa me configuration: After selecting the ports, click on Apply: 18.
NetComm NCT240 Management Guide Release 1.0 2.2.3 xDSL profiles 2.2.3.1 Port profile ADSL profiles can be added and deleted using this page 2.2.3.2 VC profile VC profile can be added using this page 1.
NetComm NCT240 Management Guide Release 1.0 2.2.3.3 Alarm profile SET alarm profile 2.2.3.4 Map alarm profile Map the Alarm profile 20.
NetComm NCT240 Management Guide Release 1.0 2.2.4 Line Diagnostic – DEL T 2.3 Switch 2.3.1 VLAN Default VLAN S tack VLAN Priority T ag mode S trip mode 21.
NetComm NCT240 Management Guide Release 1.0 Forwarding method Frame types 2.3.2 Ethernet Port Setting Uplink 1 and 2 enable and disable Flow control configuration 22.
NetComm NCT240 Management Guide Release 1.0 2.3.3 MAC management This page is used for setting up the MA C aging time for the L2 switch feature in NCT240 and for setting up the MAC filter , MAC aging time setting – Default is NO MAC ageing MAC filter settings, up to 20 MAC addresse s can be added to the filter list.
NetComm NCT240 Management Guide Release 1.0 2.3.4 IGMP snooping This page is for co nfigu ring IGMP snoopi ng feature, IGMP snooping can be enabl ed for PVC, VLAN. IGMP sno opin g and IGMP fast leave feature can be en able d and disabled. 2.3.5 Port authentication 802.
NetComm NCT240 Management Guide Release 1.0 802.1x monitor page: 2.3.6 Queue MAP 25.
NetComm NCT240 Management Guide Release 1.0 2.3.7 DHCP relay – option 82 2.3.8 Loop test 2.4 Status 2.4.1 Channel status 26.
NetComm NCT240 Management Guide Release 1.0 Display the channel status of each port Upstream and Downstream. 2.4.2 Line status Display the Line status for each line.
NetComm NCT240 Management Guide Release 1.0 2.5 IP 2.5.1 IP setup For Setting IP , Net mask and Default gateway for two 1000base uplink ports. For setting IP , Net mask and Default gate way for the Management 100base Ethernet port.
NetComm NCT240 Management Guide Release 1.0 2.5.3 PING function For pinging any IP address for diagnostic purposes. 2.5.4 VLAN (For management ) 2.6 Performance 2.
NetComm NCT240 Management Guide Release 1.0 2.7 Statistics 2.7.1 Gigabit Ethernet port counters 2.7.2 Utopia counter Port 1~8 = Utopia port 0~7 Port 9~16 = Utopia port 32~39 Port 17~24 = Utopia port 64~71 2.
NetComm NCT240 Management Guide Release 1.0 2.7.4 Ether port counter 2.7.5 Vcencap counter 2.7.6 Excpetion counter 31.
NetComm NCT240 Management Guide Release 1.0 2.8 Configuration 2.8.1 Configuration save SA VE the current configuration of NCT240 in to non volatile Memory 2.
NetComm NCT240 Management Guide Release 1.0 3. Configuring NCT240 by CLI Interface T o use “windows hyper terminal” to get in to CLI interface, a confi guration need to be set as the method below:.
NetComm NCT240 Management Guide Release 1.0 Select the comport the device is connected to - (if you are using a com puter with a built in com-port the port num ber will be COM1 or COM2 but if you are .
NetComm NCT240 Management Guide Release 1.0 After completing the initial setup, GOTO – File > Properties > settings And do the settings according to the window below .
NetComm NCT240 Management Guide Release 1.0 This chapter intr oduces the command line interface and lists the available commands. It is divided into 7 topics : 1. System:- Deal with system configuration and maintenance. 2. ADSL:- Introducing and configuring ADSL parameters.
NetComm NCT240 Management Guide Release 1.0 Command format Some commands required parameter(s). The num ber of parameter required is dif ferent for each command.
NetComm NCT240 Management Guide Release 1.0 SYSTEM: These are the commonly used commands that belong to the sys (system) group of commands as the figure 2.
NetComm NCT240 Management Guide Release 1.0 Command usage : BAS0/sys>daisy The management of daisy chain. Usage: daisycontrol <show|setdevice|setta rg et|tsetslavenum|tshowslavenum> show Display the settings of daisy chain management. s e t d e v i c e S e t t h e l o c a l d e v i c e I D .
NetComm NCT240 Management Guide Release 1.0 Info This command shows general system se tting about switch name, switch location, contact person and contact phone number .
NetComm NCT240 Management Guide Release 1.0 Command usage : BAS/sys>user Setup user information. Usage: user <add| del| list| online| passwd> add Add an account and assign it's group.
NetComm NCT240 Management Guide Release 1.0 SNMP This command is for configuring S NMP agent: Synt ax: snmp <show|getcommunity |setcommunity |trapcommunity> ¾ s h o w D i s p l a y S N M P s e t t i n g s . ¾ getcommunity Set the SNMP GetRequest community .
NetComm NCT240 Management Guide Release 1.0 Syslog syslog is a utility for tracking and logging all manner of system messages from the merely inform ational to the extremely critic al.
NetComm NCT240 Management Guide Release 1.0 Ti m e This command can display and set system’ s time. Syntax: time <show | set> ¾ show – display system time ¾ set – set system time Command.
NetComm NCT240 Management Guide Release 1.0 Command usage: ¾ set date use this format yyyy:mm:dd BAS/sys>date The system's current date Usage: date <show| set> show Display the system's current date. s e t S e t t h e s y s t e m ' s d a t e .
NetComm NCT240 Management Guide Release 1.0 Alarm Syntax: alarm <show> show Display the recorded system alarm. alarm show <current|his tory> Command usage: BAS0/sys>alarm The recorded system alarm . Usage: alarm <show> show Display the recorded system alarm.
NetComm NCT240 Management Guide Release 1.0 ADSL: This chapter explains how to configur e NCT240 system’ s ADSL ports. It also covers how to configure virtual chan nels and virtual channel profiles. A profile is a table that contains a list of pre-configured ADSL settings.
NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/adsl>enable T urn on the specified ADSL ports Usage: enable portlist (1-24) BAS/adsl>enable 1~24 (will enable all the ports) enable.
NetComm NCT240 Management Guide Release 1.0 Profile Syntax: profile <show| set| delete| map> ¾ show –show an ADSL profile ¾ set – create an ADSL line profile do wnst ream max rate – down.
NetComm NCT240 Management Guide Release 1.0 Line diagnostic Syntax: linediag <port number> ¾ Run line diagnostic on the specified port Command usage: BAS/adsl>linediag Usage: linediag Set the specified port to line diagnostics and display the result.
NetComm NCT240 Management Guide Release 1.0 Alarmprofile Syntax: alarmprofile <show| set| delete| map> ¾ show – display alarm profiles and their settings ¾ set – configure an alarm profile.
NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/adsl>pvc Display , create, modify , and remove a PVC setting Usage: pvc <list|show| set| delete> list List all mapped vcprofiles for all port. s h o w D i s p l a y P V C s e t t i n g s .
NetComm NCT240 Management Guide Release 1.0 Linestatusget This command will list the line status. Syntax: linestatusget Command usage: BAS/status>linestatusget line status get Usage: linestatusget nLine(1- 24) nDirection(0-1) linestateget command Linestateget This command will list the line states.
NetComm NCT240 Management Guide Release 1.0 SWITCH: This chapter will guide user how to configure the NCT240 switch features. h e l p D i s p l a y c o m m a n d l i s t ? D i s p l a y c o m m a n d .
NetComm NCT240 Management Guide Release 1.0 VLAN Usage: vlan <show|portshow|basicset|advset|switchm ode|frametype> ¾ s h o w D i s p l a y V L A N s e t t i n g s . ¾ portshow Display the port(s) VLAN settings. ¾ b a s i c s e t B a s i c C onfiguration of a VLAN entry .
NetComm NCT240 Management Guide Release 1.0 802.1x Syntax: 802_1x <show|portmode|enable|disable|porte nable|portdisable|config|timer> ¾ show - Display IEEE 802.1X settings. ¾ Enable - Enable 802.1x protocol ¾ disable - Disable 802.1x protocol ¾ portmode - Set portmode on special ports ¾ portenable - T urn on IEEE 802.
NetComm NCT240 Management Guide Release 1.0 Command Usage: igmpsnoop <show|set|enable|disable|fastleave> igmpsnoop <show> igmpsnoop set <VPI(0~4095)> <VCI(0~ 65535)> <VID> <Priority> igmpsnoop <enable> T urn on IGMP snooping.
NetComm NCT240 Management Guide Release 1.0 Looptest Using this command you can diagnostic this device through four ways loops. Syntax: looptest <ingutopia|egutop ia|ingge0|egge0|disable> ¾ ing.
NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/ip>show ixp0 ip addr: 192.168.1.1 mac addr: 00:aa:aa:aa:aa:aa gateway: 0.0.0.0 net mask: 255.255.255.0 eth0 ip addr: 192.168.0.1 mac addr: 00:05:ca:00:04:10 gateway: 0.0.0.0 net mask: 255.
NetComm NCT240 Management Guide Release 1.0 Command usage: set <ip|netmask|mac|vlan> s e t i p <device ID> <ip> s e t n e t m a s k <device ID> <netmask> s e t m a c <.
NetComm NCT240 Management Guide Release 1.0 Command usage : ping <ip> <count> STATISTICS: Use these commands to display ADSL statistics. h e l p D i s p l a y c o m m a n d l i s t ? D i s.
NetComm NCT240 Management Guide Release 1.0 Ethuto Syntax: ethuto <utopia| v cc| ether| ge| vcen capgroup| exception> ¾ utopia –display UT OPIA port rx and tx counters ¾ vcc –display Vcc i.
NetComm NCT240 Management Guide Release 1.0 Save This command saves all system configura tions to nonvolatile memory . Y ou must use this command to save any configura tion changes that you make, otherwise the NCT240 will ignore the changes. Save your changes after each configuration session.
NetComm NCT240 Management Guide Release 1.0 4. Troubleshooting Troubleshooting guide T rouble Possible cause Solution PWR indicator does not light up after power on. Power outlet, power cord, or internal power supply may be defective. • Check the power outlet by plugging in another device that is functioning properly.
NetComm NCT240 Management Guide Release 1.0 Cannot ping uplink 65.
NetComm NCT240 Management Guide Release 1.0 6. Glossary 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX IEEE 802.3u specification for 100 Mbps Fast Et hernet over two pairs of Category 5 UTP cable.
NetComm NCT240 Management Guide Release 1.0 OSI model and extends the physical la yer and media with repeaters and implementations that operate on fiber, thin coax and twisted-pair cable. Fast Ethernet A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method.
NetComm NCT240 Management Guide Release 1.0 A portion of the networking protocol that governs access to the transmission m edium, facilitating the exchange of data between network nodes. MDF (Main Distribution Fram e) Equipment where outside telephone lines ar e terminated at a building or site.
NetComm NCT240 Management Guide Release 1.0 A Virtual LAN is a collection of network nodes that share the same collision dom ain regardless of their physical location or connection point in the network.
Product W arranty NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option, via registering your product online at the NetComm website www .
An important point after buying a device NetComm IP DSLAM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NetComm IP DSLAM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NetComm IP DSLAM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NetComm IP DSLAM you will learn all the available features of the product, as well as information on its operation. The information that you get NetComm IP DSLAM will certainly help you make a decision on the purchase.
If you already are a holder of NetComm IP DSLAM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NetComm IP DSLAM.
However, one of the most important roles played by the user manual is to help in solving problems with NetComm IP DSLAM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NetComm IP DSLAM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
