Instruction/ maintenance manual of the product Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports Net Optics
Go to page of 16
Installation Guide for Link Aggregator T ap 10/100 In-Line to GigaBit with SFP Monitor Ports Doc. PUBLAIF4CU4SFPU Rev . 1, 10/08.
.
10/100 In-Line Link Aggregator T ap Contents Introduction ..................................................... 1 Key Features .................................................... 2 Application Diagram .............................................. 3 C a b l i n g G u i d e l i n e s .
10/100 In-Line Link Aggregator T ap PLEASE READ THESE LEGAL NOTICES CAREFULL Y . By using a Net Optics T ap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual.
10/100 In-Line Link Aggregator T ap 1 Introduction Thank you for choosing the most versatile monitoring T ap available today . Net Optics Link Aggregator T aps are an efciency breakthrough for passively monitoring multiple full-duplex links.
10/100 In-Line Link Aggregator T ap 2 K ey Fea tur es Passive, Secure T echnology Supports full-duplex monitoring of four links with a single NIC, increasing • monitoring efciency Optional Regene.
10/100 In-Line Link Aggregator T ap 3 Application Diag ram Link Aggregator Tap Implementation Switch Switch Switch HR Finance Switch 10/100 In-Line Link Aggregator Tap GigaBit SX Monitoring Device 2 G.
10/100 In-Line Link Aggregator T ap 4 Unpacking and Inspection Carefully unpack the 10/100 In-Line Link Aggregator T ap and check for dam- aged or missing parts.
10/100 In-Line Link Aggregator T ap 5 LED Indicators PWR 1/ PWR 2 • : Main and Redundant Power . If the T ap is deployed with both power supplies, both LEDs illuminate when the T ap is plugged in. If an LED is off, this indicates that the corresponding power supply is not connected or not functioning.
10/100 In-Line Link Aggregator T ap 6 NOTE: _____________________________________________________________ At 10Mbps, if any of the network links ar e unplugged during operation, it will be necessary to r estart trafc from the connected network devices upon r e-connecting to the Link Aggr egator .
10/100 In-Line Link Aggregator T ap 7 Note: ______________________________________________________________ The 10/100 Link Aggr egator is shipped with the following default dip-switch settings. It is str ongly recommended that you do not make any changes to these settings, except when needed, and only to switches 2,4,5 and 6.
10/100 In-Line Link Aggregator T ap 8 Specications Environment Operating T emperature: 0˚C to 55˚C Storage T emperature: -10˚C to 70˚C Relative Humidity: 10% min, 95% max, non-condensing Power Power Supply Input: 100-240V AC, 0.5A, 47-63Hz DC Power Input: -48 VDC typical, -36 VDC min, -75 VDC max Mechanical Dimensions: 1.
10/100 In-Line Link Aggregator T ap 9 Limitations on W ar ranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC.
10/100 In-Line Link Aggregator T ap 10 Notes:.
.
© 2008 by Net Optics, Inc. All Rights Reserved. www .netoptics.com.
An important point after buying a device Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports you will learn all the available features of the product, as well as information on its operation. The information that you get Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports will certainly help you make a decision on the purchase.
If you already are a holder of Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports.
However, one of the most important roles played by the user manual is to help in solving problems with Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
