Instruction/ maintenance manual of the product GIGABIT TX TO SX TAP CVT-GCU/SX Net Optics
Go to page of 16
Installation Guide for GigaBit TX to SX T ap Model CVT -GCU/SX Doc. PUBCVTGCUSXU Revised 03/07.
.
.
Installation Guide for Gigabit TX/SX T ap T a ble of Contents I n t r o d u c t i o n .....................................................1 Key Features ....................................................1 Product Diagram ...........................
Installation Guide for Gigabit TX/SX T ap PLEASE READ THESE LEGAL NOTICES CAREFULL Y . By using a Net Optics T ap you agree to the terms and conditions of usage set forth by Net Optics, Inc. No licenses, express or implied, are granted with respect to any of the technology described in this manual.
Installation Guide for Gigabit TX/SX T ap 1 Introduction Net Optics GigaBit TX to SX T ap simplies connecting FX ber monitoring and security devices to GigaBit copper network links. Convert TX to SX and tap into the link with one device, reducing cost and complexity at the same time.
Installation Guide for Gigabit TX/SX T ap 2 Product Dia g ram Figure 1. Monitor A/B SX Network B TX Network A TX LED Indicators B A www .netoptics.com GigaBit TX to SX Converter T ap LINK ACT 1 2 LASE.
Installation Guide for Gigabit TX/SX T ap 3 Figure 2. Connecting a GigaBit TX to SX T ap to the Networ k 1. Unpack the T ap and verify that you have all components, and obtain the required cables needed to successfully install the unit. 2. Connect Network Port A to the appropriate switch, server or router using a CA T5E RJ45 straight-thru cable.
Installation Guide for Gigabit TX/SX T ap 4 Connecting a GigaBit TX to SX T ap to the Monitoring De vice 1. Supply power to the T ap using the 2 redundant power supplies included with the unit. V erify that the Power LED illuminates. 2. Using a Net Optics Custom Monitor Cable, connect the single-duplex end to the T ap Monitor Port A/B.
Installation Guide for Gigabit TX/SX T ap 5 Figure 3. Connecting a GigaBit TX to SX T ap to the Monitoring De vice T o monitoring device ® www .netoptics.
Installation Guide for Gigabit TX/SX T ap 6 Specications Splitter Specications: Split Ratio: 50/50 Fiber T ype: Multimode Corning 62.5/125µm, wavelength 850nm Insertion Loss: Network Port: ≤ 4.
Installation Guide for Gigabit TX/SX T ap 7 Limitations on W arranty and Liability Net Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, INC.
Installation Guide for Gigabit TX/SX T ap 8 Notes:.
Installation Guide for Gigabit TX/SX T ap 9 Notes:.
.
© 2007 by Net Optics, Inc. All Rights Reserved. www .netoptics.com.
An important point after buying a device Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX you will learn all the available features of the product, as well as information on its operation. The information that you get Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX will certainly help you make a decision on the purchase.
If you already are a holder of Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX.
However, one of the most important roles played by the user manual is to help in solving problems with Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Net Optics GIGABIT TX TO SX TAP CVT-GCU/SX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
