Instruction/ maintenance manual of the product LD 500/500V 15" Nesco
Go to page of 18
LD 500/500V 15” TFT Color LCD Monitor User Manual IBM and VGA are registered trademarks of In ternational Business Machines Corp. MS-DOS and W indows are registered trademarks of Microsoft Corp. Macintosh is a registered trademark of Apple Computer Inc.
LD 500/500V User Manual Federal Communications Commission (F .C.C.) Statement This equipment has been tested and found to comply with the lim its for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LD 500/500V User Manual T able of Contents Federal Communications Commission (F .C.C.) Statement ................................................... 2 T able of Contents .................................................................................
LD 500/500V User Manual Safety Precautions Please read following instructions before use: 1. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display . 2. Do not scratch or press on the panel with any sharp objects, such as a pen or pencil, as this may result in damage to the panel.
LD 500/500V User Manual Thank you for your purchase of a NESO LD 500/500V TFT Color LCD monitor . Y our NESO LD 500/500V package includes: LD 500/500V LCD monitor AC adapter Power cord .
LD 500/500V User Manual Quick Installation Guide PC Setting Before connecting your PC to the LD 500/500V LCD monitor , change the display screen settings (resolution and frequency) to match those below .
LD 500/500V User Manual Illustration Removing the connector cover Connecting the cables Pulling down the T-bar support strut - 7 -.
LD 500/500V User Manual Attaching the connector cover Adjusting the viewing angle - 8 -.
LD 500/500V User Manual Operation This section explains how to fine-tune your monitor's screen im age to suit your personal preferences, or to adapt it for dif ferent applications or lighting conditions.
LD 500/500V User Manual About Auto Adjustment The Auto Adjustment is best performed at W indows “Shut Down” mode. Follow the steps as below: 1) From the “Start” menu, select “Shut Down” The following dialogue will appear . 2) Press Auto (+) on the front bezel, the following message will appear .
LD 500/500V User Manual On-Screen Display (OSD) Main Menu Y our LD 500/500V TFT Color LCD monitor provides nine main control parameters that you can adjust according to preference. T o access the main menu of the OSD controls, follow the steps as follows: 1.
LD 500/500V User Manual Description of OSD Functions The following is a description of the dif ferent choices shown in the main OSD control menu. Icon Function Function Description Brightness Increase.
LD 500/500V User Manual Specifications (LD 500) Display T ype 38.1-cm (15-inch) TFT color LCD panel Pixel Pitch 0.297 mm x 0.297 m m Display Colors 16.
LD 500/500V User Manual Specifications (LD 500V) Display T ype 38.1-cm (15-inch) TFT color LCD panel Pixel Pitch 0.297 mm x 0.297 m m Display Colors 16.
LD 500/500V User Manual Standard T iming T able If the selected timing is NOT included in the table below , this LCD monitor will use the most suitable available timing. Resolution H. Freq. (KHz) V . Freq. (Hz) Pixel Freq. (MHz) H/V Sync. Polarity Mode 640 x 350 31.
LD 500/500V User Manual T roubleshooting This LCD monitor has been pre-configured using factory standard VGA timings. Due to the output timing dif ferences among various VGA cards in the market, users m ay initially experience an unstable or unclear display when ever a new display mode or new VGA card is selected.
LD 500/500V User Manual Problem Points to check with possible solutions Display position is incorrect Adjust the vertical position or horizontal position from the OSD m enu. (“Image”, “H-pos” or “V-pos”) If the problem persists, use the graphics board’ s utility software to change the display position if available.
LD 500/500V User Manual - 18 - Cleaning the LCD Monitor Caution T o ensure safety , always unplug the monitor before clearing it. Cleaning the monitor while it is plugged into a power outlet may result in electric shock. Periodically clean the area around the plug.
An important point after buying a device Nesco LD 500/500V 15" (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nesco LD 500/500V 15" yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nesco LD 500/500V 15" - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nesco LD 500/500V 15" you will learn all the available features of the product, as well as information on its operation. The information that you get Nesco LD 500/500V 15" will certainly help you make a decision on the purchase.
If you already are a holder of Nesco LD 500/500V 15", but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nesco LD 500/500V 15".
However, one of the most important roles played by the user manual is to help in solving problems with Nesco LD 500/500V 15". Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nesco LD 500/500V 15" along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
