Instruction/ maintenance manual of the product R1000 NEC
Go to page of 110
Enhancement Guide to Migr a ting from X en Axis/Master to X en IPK R1000 NEC Business Solutions Ltd Document No.: 8283 Release 1.0 September 2003 Xe n I P K.
September 20 03 NEC Business Solutions Ltd 2 Xen IPK R1000 Upgrade Proce dure for Xen Axis/Master Doc. No.: 8283 - Release 1.0 September 2003 THIS P AGE INTENTIONALL Y LEFT BLANK.
Xen IPK R1000 Upgrade Procedure for Xen Axis/Master i Doc. No. 8283 - Release 1.0 September 2003 Preface & Disclaimer GENERAL INFORMA TION The Xen IPK System is a feature -rich key system that provides over 200 features including Compu ter T elephony Integration, Least Cost Routing, Automatic Call Distribution, ISDN T runks an d many others.
September 2003 NEC Business Solutions Ltd ii Preface & Disclaimer Doc. No. 8283 - Release 1.0 September 2003 NEC shall not be liable for any direc t, indirect, consequential or incid ental damages about the use of this equipment, manual or any related materials.
Xen IPK R1000 Upgrade Procedure for Xen Axis/Master iii Doc. No. 8283 - Release 1.0 September 2003 Import ant Note About this Upgrade Procedure This document provides all of the necessary informat ion to upgrade your Xen Axis/Master system to Xen IPK Release 1000 sof tware and to inst all the related hardware.
September 2003 NEC Business Solutions Ltd iv Import ant Note About this Upgrade Pr ocedure Doc. No. 8283 - Release 1.0 September 2003 THIS P AGE INTENTIONALL Y LEFT BLANK.
Xen IPK R1000 Upgrade Proce dure for Xen Axis/Master v Doc. No.: 8283 - Release 1.0 September 2003 T able of Content s Preface & Disclaimer ....................................... ..................................................... ....... i Important Note About this Upgrade Procedure .
September 2003 NEC Business Solutions Ltd vi T able of Contents Doc. No.: 8283 - Release 1.0 September 2003 Chapter 4 Programming 11-2-04 Call Arrival Key Block Assignment ............... ................ ................... ............... 4 - 84 1-13-00 PRI Channel Assignment .
Migration from Xen Axis/Master Chapter 1 – 1 Doc. No. 8283 - Release 1.0 September 2003 Xen IPK R1000 Upgrade Procedure for Xen Axis/ Master Chapter 1 S ECTION 1 M IGRATION FROM X EN A XIS /M ASTER Use the following instruction s to migrate from an existing Xen Axis/Master system to a Xen IPK R1000 system.
September 2003 NEC Business Solutions Ltd 2 – Chapter 1 Direct Download from the Inst alled Xen System Doc. No. 8283 - Release 1.0 September 2003 The following memories are empty af ter the upgrade:.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Direct Download from the Inst alled Xen System Chapter 1 – 3 Doc. No. 8283 - Release 1.0 September 2003 5. From the Communications menu, se lect Download and click S tart to download the databa se from the Xen Axis/Master system.
September 2003 NEC Business Solutions Ltd 4 – Chapter 1 Direct Download from the Inst alled Xen System Doc. No. 8283 - Release 1.0 September 2003 7. From the Communications menu, select Disconnect to disconnect from the Xen system.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Direct Download from the Inst alled Xen System Chapter 1 – 5 Doc. No. 8283 - Release 1.0 September 2003 8. Assign any other required syste m data assignment change s and from the File menu, select Save if required.
September 2003 NEC Business Solutions Ltd 6 – Chapter 1 Direct Download from the Inst alled Xen System Doc. No. 8283 - Release 1.0 September 2003 10. From the Communications menu , select Connect to connect the Xen IPK. 1 1. From the Communications menu, select Upload, and click S tart.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Direct Download from the Inst alled Xen System Chapter 1 – 7 Doc. No. 8283 - Release 1.
September 2003 NEC Business Solutions Ltd 8 – Chapter 1 Direct Download from the Inst alled Xen System Doc. No. 8283 - Release 1.0 September 2003 14. From the Communications menu, Select Disconnect to disconnect from Xen IPK. 15. Reassign all settings recorded in S tep 2, and confirm proper system operation.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Import Saved Xen Dat abase Using a Previous V ers ion of the Xen Axis/Master MA T Chapter 1 – 9 Doc. No. 8283 - Release 1.0 September 2003 S ECTION 3 I MPORT S AVED X EN D AT ABASE U SING A P REVIOUS V ERSION OF THE X EN A XIS / M ASTER MA T 1.
September 2003 NEC Business Solutions Ltd 10 – Chapter 1 Import Saved Xen Dat abase Using a Previous V ersion of the Xen Axis/Master MA T Doc. No. 8283 - Release 1.0 September 2003 4. From the File menu, select Import Xen Axis/Master file to import a previously saved database .
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Import Saved Xen Dat abase Using a Previous V ers ion of the Xen Axis/Master MA T Chapter 1 – 1 1 Doc. No. 8283 - Release 1.0 September 2003 6. When the download is finished, select Save As from the File menu and enter a file name.
September 2003 NEC Business Solutions Ltd 12 – Chapter 1 Import Saved Xen Dat abase Using a Previous V ersion of the Xen Axis/Master MA T Doc. No. 8283 - Release 1.0 September 2003 8. Change hardware from the Xen Axis/Master system to the Xen IPK system.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Import Saved Xen Dat abase Using a Previous V ers ion of the Xen Axis/Master MA T Chapter 1 – 13 Doc. No. 8283 - Release 1.0 September 2003 9. From the Communications menu, select Connect to connect to the Xen IPK.
September 2003 NEC Business Solutions Ltd 14 – Chapter 1 Import Saved Xen Dat abase Using a Previous V ersion of the Xen Axis/Master MA T Doc. No. 8283 - Release 1.0 September 2003 1 1. Click Hardware Upload. 12. When Upload is finished , Click Close.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Import Saved Xen Dat abase Using a Previous V ers ion of the Xen Axis/Master MA T Chapter 1 – 15 Doc. No. 8283 - Release 1.0 September 2003 13. From the Communications menu, select Disconnect to disconn ect from the Xen IPK.
September 2003 NEC Business Solutions Ltd 16 – Chapter 1 Upgrade Procedur e for MIFM-U( ) Doc. No. 8283 - Release 1.0 September 2003 S ECTION 4 U PGRADE P ROCEDURE FOR MIFM-U( ) Upgrade Description This ETU must be upgraded to firmware V5.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Upgrade Proced ure for MIFM-U( ) Chapter 1 – 17 Doc. No. 8283 - Release 1.0 September 2003 7.
September 2003 NEC Business Solutions Ltd 18 – Chapter 1 Upgrade Procedu re for PR T(1)-U( ) ETU Doc. No. 8283 - Release 1.0 September 2003 S ECTION 5 U PGRADE P ROCEDURE FOR PRT(1)-U( ) ETU Upgrade Description The PR T(1)-U( ) ETU must be up dated to firmware V2.
Enhancement Guide to Migrating from Xen Axis/Maste r to Xen IPK R1000 Upgrade Proced ure for PR T(1)-U( ) ETU Cha pter 1 – 19 Doc. No. 8283 - Release 1.0 September 2003 4. Install the PR T(1)-U( ) ETU in the KSU. Sof tware V erificat ion T o verify that the sof tware revision was i nstall ed: 1.
September 2003 NEC Business Solutions Ltd 20 – Chapter 1 Adding an Earth Connection Doc. No. 8283 - Release 1.0 September 2003 S ECTION 6 A DDING AN E ARTH C ONNECTION The Xen IPK B64-U23 KSU must be properly and permanently grounded, due to it being an ESEL V (Earthed Safety Extra Low V oltage) compliant product.
Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 21 Doc. No. 8283 - Release 1.0 September 2003 Hardware Description and Specifications for Xen IPK Chapter 2 1.1 B64-U23 KSU 1.1.1 Basic KSU The B64-U23 KSU provides service for out side lines, Attendant Consoles, and interconnectio n of the station terminals.
September 2003 NEC Business Solutions Ltd 22 – Chapter 2 Hardware Description and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 The installatio n instructions provided in th is chapter apply to the basic B64-U23 KSU and th e expansion B64-U23 KSUs unless otherwise specified.
Xen IPK R1000 Upgrade Procedure for Xe n Axis/Master Xen IPK Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 23 Doc. No. 8283 - Release 1.
September 2003 NEC Business Solutions Ltd 24 – Chapter 2 Hardware Descr iption and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 Switch Settings Refer to T able 1-1: CPUI( )-U( ) ETU Default Switch Settings . WARNING Pressing SW2 interrupt s all service and causes a second init ialization.
Xen IPK R1000 Upgrade Procedure for Xe n Axis/Master Xen IPK Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 25 Doc. No. 8283 - Release 1.0 September 2003 When a CPUI( )-U( ) ETU is installed in the system, the clock/ calendar must be set.
September 2003 NEC Business Solutions Ltd 26 – Chapter 2 Hardware Description and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 1. 3 P KU 1 92-UA (Port K e y Unit) The Port Key Unit allows the system to be configured as an Expanded Port Package.
Xen IPK R1000 Upgrade Procedure for Xe n Axis/Master Xen IPK Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 27 Doc. No. 8283 - Release 1.
September 2003 NEC Business Solutions Ltd 28 – Chapter 2 Hardware Descr iption and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 LED Indications Live LED indications are listed below . Blinking Red Normal Operation S teady Red Operation S topped (power On) Off No Power LED1 indications are listed below .
Xen IPK R1000 Upgrade Procedure for Xe n Axis/Master Xen IPK Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 29 Doc. No. 8283 - Release 1.
September 2003 NEC Business Solutions Ltd 30 – Chapter 2 Hardware Descr iption and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 Connectors The ESIE(8)-U( ) ETU has four co .
Xen IPK R1000 Upgrade Procedure for Xe n Axis/Master Xen IPK Hardware Descr iption and S pecific ations for Xen IPK Chapter 2 – 31 Doc. No. 8283 - Release 1.
September 2003 NEC Business Solutions Ltd 32 – Chapter 2 Hardware Descr iption and S pecifications for Xen IPK Doc. No. 8283 - Release 1.0 September 2003 THIS P AGE INTENTIONALL Y LEFT BLANK.
Features and S pecifications for Xen IPK Chapter 3 – 33 Doc. No. 8283 - Release 1.0 September 2003 Features and Specifications for Xen IPK Chapter 3 Attendant T ransfer A-15 F EATURE D ESCRIPTION At.
September 2003 NEC Business Solutions Ltd 34 – Chapter 3 Attendant T ransfer A-15 Doc. No. 8283 - Release 1.0 September 2003 S ERVICE C ONDITIONS General When a T ransfer/Camp-On is denied, the call remains on hold at the Attendant Position Multiline T erminal.
Xen IPK Features and S pecifications for Xen IPK Call Arrival (CAR) Key s C-3 Chapter 3 – 35 Doc. No. 8283 - Release 1.0 September 2003 Call Arrival (CAR) Keys C-3 F EATURE D ESCRIPTION Call Arrival (CAR) keys are available sof tware extensions as part of 120 station numbers o n the Expanded Port Package.
September 2003 NEC Business Solutions Ltd 36 – Chapter 3 Call Arriv al (CAR) Keys C-3 Doc. No. 8283 - Release 1.0 September 2003 S ERVICE C ONDITIONS General Incoming out side line calls ca n ring on a CAR. When the call is answered, it resides on a CAP (or CO Line key).
Xen IPK Features and S pecifications for Xen IPK Call Arrival (CAR) Key s C-3 Chapter 3 – 37 Doc. No. 8283 - Release 1.0 September 2003 R ELATED F EATURES L IST G UIDE TO F EATURE P ROGRAMMING Item .
September 2003 NEC Business Solutions Ltd 38 – Chapter 3 Caller ID - Incoming C-6 Doc. No. 8283 - Release 1.0 September 2003 Caller ID - Incoming C-6 F EATURE D ESCRIPTION Caller ID displays the calling p arty telephone number and/or name on the LCD of the Multiline T erminal for CO incoming calls.
Xen IPK Features and S pecifications for Xen IPK Caller ID - Incoming C-6 Chapter 3 – 39 Doc. No. 8283 - Release 1.0 September 2003 For Multiline T erminals without automat ic Caller ID display but .
September 2003 NEC Business Solutions Ltd 40 – Chapter 3 Caller ID - Incoming C-6 Doc. No. 8283 - Release 1.0 September 2003 When the name is not included in the Caller ID informat ion, Memory Block 3-53 (Caller Name Indication Selection) compares the Caller ID information with the dial dat a in the speed dial area.
Xen IPK Features and S pecifications for Xen IPK Caller ID - Incoming C-6 Chapter 3 – 41 Doc. No. 8283 - Release 1.0 September 2003 General: Caller ID Indication When the CO line key , CAR key or ANSWER key is flashing red (Incoming CO call), the user can press Feature + Key to disp lay Caller ID even when Caller ID is not normally displayed.
September 2003 NEC Business Solutions Ltd 42 – Chapter 3 Caller ID - Incoming C-6 Doc. No. 8283 - Release 1.0 September 2003 The Caller ID Indication disappears: z When an incomin g call is answered. z When an intern al or ring transf er call is receiv ed.
Xen IPK Features and S pecifications for Xen IPK Caller ID - Incoming C-6 Chapter 3 – 43 Doc. No. 8283 - Release 1.0 September 2003 The DIRE key provided with the Dterm Series i T erminals performs the same function as the Caller ID Scroll key .
September 2003 NEC Business Solutions Ltd 44 – Chapter 3 Caller ID - Incoming C-6 Doc. No. 8283 - Release 1.0 September 2003 G UIDE TO F EA TURE P ROGRAMMING Order and Shortcut System Dat a Name Mem.
Xen IPK Features and S pecifications for Xen IPK Dterm Series i Multiline T e rminals D-19 Chapter 3 – 45 Doc. No. 8283 - Release 1.0 September 2003 Dterm Series i Multiline T erminals D-19 F EATURE D ESCRIPTION The D term Series i Multiline T ermin als provide ergonomic form and user- friendly functions.
September 2003 NEC Business Solutions Ltd 46 – Chapter 3 Dterm Series i Multiline T erminals D-19 Doc. No. 8283 - Release 1.0 September 2003 O PERATING P ROCEDURE S Refer to individual feature for det ails.
Xen IPK Features and S pecifications for Xen IPK Dterm Series i Multiline T e rminals D-19 Chapter 3 – 47 Doc. No. 8283 - Release 1.0 September 2003 S ERVICE C ONDITIONS General The D term Series i Multiline T erminals wi th an adjust able display of fer soft key operation.
September 2003 NEC Business Solutions Ltd 48 – Chapter 3 Dterm Series i Multiline T erminals D-19 Doc. No. 8283 - Release 1.0 September 2003 Restrictions For compatib ility of Adapter Unit s and T erminals, refer to the following table: Up to two adapters can be installe d in a D term Series i Multiline T erminal (except DTR-2DT -1A).
Xen IPK Features and S pecifications for Xen IPK Dterm Series i Multiline T e rminals D-19 Chapter 3 – 49 Doc. No. 8283 - Release 1.0 September 2003 The ACA-U( ) UNIT (AC Adapter) is required wh.
September 2003 NEC Business Solutions Ltd 50 – Chapter 3 DTU-type Mult iline T e rminal Migration D-20 Doc. No. 8283 - Release 1.0 September 2003 DTU-type Multiline T erminal Migration D-20 F EATURE.
Xen IPK Features and S pecifications for Xen IPK DTU-type Multiline T erminal Mi gration D-20 Chapter 3 – 51 Doc. No. 8283 - Release 1.0 September 2003 R ELATED F EATURES L IST G UIDE TO F EATURE P .
September 2003 NEC Business Solutions Ltd 52 – Chapter 3 Electronic V olume Control E-2 Doc. No. 8283 - Release 1.0 September 2003 Electronic V olume Control E-2 F EATURE D ESCRIPTION Electronic V o.
Xen IPK Features and S pecifications for Xen IPK Electronic V olume Control E-2 Chapter 3 – 53 Doc. No. 8283 - Release 1.0 September 2003 1. Press P to go of f-hook. 2. Dial default Access Code FK . 3. Dial A from the dial p ad. 4. Press M while the st ation is ringing to control ringing volume ( ^ to increase or v to decr ease).
September 2003 NEC Business Solutions Ltd 54 – Chapter 3 Electronic V olume Control E-2 Doc. No. 8283 - Release 1.0 September 2003 R ELATED F EATURE L IST G UIDE TO F EA TURE P ROGRAMMING Feature Nu.
Xen IPK Features and S pecifications for Xen IPK External Zone Paging (Me et-Me) E-6 Chapter 3 – 55 Doc. No. 8283 - Release 1.0 September 2003 External Zone Paging (Meet-Me) E-6 F EATURE D ESCRIPTION External Zone Paging (Meet-Me) allows up to thre e zones of External Zone Paging plus All Zone External Paging.
September 2003 NEC Business Solutions Ltd 56 – Chap ter 3 Exter nal Zone Pagin g (Meet-Me ) E-6 Doc. No. 8283 - Release 1.0 September 2003 1. Lift th e handset. 2. Dial the desired Access Code EE ~ EI (as set in default) for the required zone. 1. Lift th e handset.
Xen IPK Features and S pecifications for Xen IPK External Zone Paging (Me et-Me) E-6 Chapter 3 – 57 Doc. No. 8283 - Release 1.0 September 2003 R ELATED F EATURES L IST G UIDE TO F EATURE P ROGRAMMIN.
September 2003 NEC Business Solutions Ltd 58 – Chapter 3 Full Duplex Ha ndsf ree F-6 Doc. No. 8283 - Release 1.0 September 2003 Full Duplex Handsfree F-6 F EATURE D ESCRIPTION The HFU-UA Unit is an add-on device to the DTU-type Multiline T erminals that provides a full duplex speake rphone for small conference ro oms.
Xen IPK Features and S pecifications for Xen IPK Full Duplex Handsfree F-6 Chapter 3 – 59 Doc. No. 8283 - Release 1.0 September 2003 G UIDE T O F EATUR E P ROGRAMMING Order and Shortcut System Data .
September 2003 NEC Business Solutions Ltd 60 – Chapter 3 ISDN-BRI T runk Connections I-7 Doc. No. 8283 - Release 1.0 September 2003 ISDN-BRI T runk Connections I-7 F EATURE D ESCRIPTION ISDN-BRI (In.
Xen IPK Features and S pecifications for Xen IPK ISDN-BRI T runk Connections I-7 Chapter 3 – 61 Doc. No. 8283 - Release 1.0 September 2003 Use Memory Block 3-72 (ISDN BR T Connection Configuration) to assign the BR T Interface as Point to Po int or Point to Multipoint (default: Point to Multipoint).
September 2003 NEC Business Solutions Ltd 62 – Chapter 3 ISDN-BRI T runk Connections I-7 Doc. No. 8283 - Release 1.0 September 2003 For BRI firmware version 1.35 or higher , Malicious Call T race is possible provided the class of service is set in the system and is subscribed with the T elstra Network.
Xen IPK Features and S pecifications for Xen IPK ISDN-BRI T runk Connections I-7 Chapter 3 – 63 Doc. No. 8283 - Release 1.0 September 2003 Calling Party Number (CPN) Service Order and Shortcut Syste.
September 2003 NEC Business Solutions Ltd 64 – Chapter 3 ISDN-PRI T runk Connections I-8 Doc. No. 8283 - Release 1.0 September 2003 ISDN-PRI T runk Connections I-8 F EATURE D ESCRIPTION This feature allows the syste m to connect directly to ESTI Primary Rate ISDN Lines.
Xen IPK Features and S pecifications for Xen IPK ISDN-PRI T runk Connections I-8 Chapter 3 – 65 Doc. No. 8283 - Release 1.0 September 2003 S YSTEM A VAILABILITY T erminal T ype All S tations. Required Component s PRT(1)-U( ) ETU CLKG-U( ) Unit O PERATING P ROCEDURES Not applicable.
September 2003 NEC Business Solutions Ltd 66 – Chapter 3 ISDN-PRI T runk Connections I-8 Doc. No. 8283 - Release 1.0 September 2003 Dat a Assignment for CO Line Se rvices Use Memory Block 3-52 (ISDN T run k Directory Number Assignment) to assign the ISDN Directory Number .
Xen IPK Features and S pecifications for Xen IPK ISDN-PRI T runk Connections I-8 Chapter 3 – 67 Doc. No. 8283 - Release 1.0 September 2003 Dat a Assignment s for Calling Party Number (CPN) Presentat.
September 2003 NEC Business Solutions Ltd 68 – Chapter 3 ISDN-PRI T runk Connections I-8 Doc. No. 8283 - Release 1.0 September 2003 Xen IPK Exp anded Eight PRT(1)-U( ) ETUs can be installed in a system. Up to 64 ISDN trunks (B Channel s) can be assigned in a system.
Xen IPK Features and S pecifications for Xen IPK ISDN-PRI T runk Connections I-8 Chapter 3 – 69 Doc. No. 8283 - Release 1.0 September 2003 G UIDE TO F EATURE P ROGRAMMING ISDN – PRI Installation C.
September 2003 NEC Business Solutions Ltd 70 – Chapter 3 ISDN-PRI T runk Connections I-8 Doc. No. 8283 - Release 1.0 September 2003 DID Line Service Calling Party Number (CPN) Service Order and Shor.
Xen IPK Features and S pecifications for Xen IPK ISDN-PRI T runk Connections I-8 Chapter 3 – 71 Doc. No. 8283 - Release 1.0 September 2003 Calling Party Number (CPN) Presentation from S tation Order.
September 2003 NEC Business Solutions Ltd 72 – Chapter 3 Music on Hold M-7 Doc. No. 8283 - Release 1.0 September 2003 Music on Hold M-7 F EATURE D ESCRIPTION A locally provided music source or an internal music source can be used to supply music to par ties on hold, to assure them that they are still co nnected to the system.
Xen IPK Features and S pecifications for Xen IPK Music on Hold M-7 Chapter 3 – 7 3 Doc. No. 8283 - Release 1.0 September 2003 Internal Source: z Program one of two melodie s (American Folk Song melody , or Christmas Song melody) as an internal source.
September 2003 NEC Business Solutions Ltd 74 – Chapter 3 Music on Hold M-7 Doc. No. 8283 - Release 1.0 September 2003 G UIDE TO F EA TURE P ROGRAMMING Order and Shortcut System Dat a Name Memory Blo.
Xen IPK Features and S pecifications for Xen IPK S tation T ransfer S-19 Chapter 3 – 75 Doc. No. 8283 - Release 1.0 September 2003 S tation T ransfer S-19 F EATURE D ESCRIPTION S tation T ransfer allows any station user in the system to transfer any call to any other station.
September 2003 NEC Business Solutions Ltd 76 – Chapter 3 S tation T ransfer S-19 Doc. No. 8283 - Release 1.0 September 2003 S ERVICE C ONDITIONS General After transferring a n answered call, the Multiline T erminal user can enter a conference by pressing the Conferen ce key on the Multiline T erminal even after the T ransfer key is pressed.
Xen IPK Features and S pecifications for Xen IPK Universal Slots U-3 Chapter 3 – 77 Doc. No. 8283 - Release 1.0 September 2003 Universal Slot s U-3 F EATURE D ESCRIPTION The Xen IPK system, B64-U( ) KSU, has eight universal slots and up to three cabinet s can be installed for both the Basic and Exp anded systems.
September 2003 NEC Business Solutions Ltd 78 – Chapter 3 U niversal Slots U-3 Doc. No. 8283 - Release 1.0 September 2003 The Basic Port Package does not limit the number of slot s. It only limit s the number of port s. An ESIB(8)-U( ) ETU with an ESIE(8)-U( ) ETU inst alled support s 16 Electronic St ation Interface ports.
Xen IPK Features and S pecifications for Xen IPK Universal Slots U-3 Chapter 3 – 79 Doc. No. 8283 - Release 1.0 September 2003 The available interfa ce cards and maximum capacities for Universal Slots with the Xen IPK system are shown in the following tables.
September 2003 NEC Business Solutions Ltd 80 – Chapter 3 U niversal Slots U-3 Doc. No. 8283 - Release 1.0 September 2003 T runk In terface Units Descripti on Maximum Cap acities Notes Basic Port Pac.
Xen IPK Features and S pecifications for Xen IPK Universal Slots U-3 Chapter 3 – 81 Doc. No. 8283 - Release 1.0 September 2003 Refer to the Xen IPK System Hardware Manu al for more information.
September 2003 NEC Business Solutions Ltd 82 – Chapter 3 U niversal Slots U-3 Doc. No. 8283 - Release 1.0 September 2003 R ELATED F EATURE L IST G RUIDE TO F EA TURE P ROGRAMMING Feature Number Feat.
Programming DRAFT 3 Chapter 4 – 83 Doc. No.: 8283 - Release 1.0 September 2003 Programming Chapter 4 The Memory Blocks listed in this section are new or modified Memory Blocks for Xen IPK Release 1000 software.
84 – Chapter 4 DRAFT 3 Call Arrival Key Block Assignment, 11-2- 04 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 11-2-04 System Mode 1 Submode 1 Data No.
Xen IPK Programming 1 1-2-04, Call Arrival Key Block Assignment DRAFT 3 Chapter 4 – 85 Doc. No.: 8283 - Release 1.0 September 2003 Programming Procedures 1 Go off-line. 2 Press LK1 + LK2 + KD to access the Memory Block. 3 Press the corresponding CO/PBX line key to change the data opti on.
86 – Chapter 4 DRAFT 3 PRI Channel Assignment, 1-13-00 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 1-13-00 System Mode 1 Submode 13 Data No.
1-13-04, PRT B Channel Outgoing Priority Selection DRAFT 3 Chapter 4 – 87 Xen IPK Programming Doc. No.: 8283 - Release 1. 0 September 2003 1-13-04 System Mode 1 Submode 13 Data No.
88 – Chapter 4 DRAFT 3 PRT B Channel-to-Trunk Group Assignment, 1-13-05 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 1-13-05 System Mode 1 Submode 13 Data No.
3 -12, Trun k-to-MOH Trunk Assignment DRAFT 3 Chapter 4 – 89 Xen IPK Programming Doc. No.: 8283 - Release 1. 0 September 2003 3 -12 System Mode 3 Submode — Data No. 12 PC Programming + BCT T runk-to-MOH T runk Assignment General Descr iption Use this Memory Block to specify the music on hold source for each CO/PBX line.
90 – Chapter 4 DRAFT 3 Multiline Terminal Type Selection, 4 -50 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 4 -50 System Mode 4 Submode — Data No.
Xen IPK Programming 4 -50, Multiline T erminal T ype Selection DRAFT 3 Chapter 4 – 91 Doc. No.: 8283 - Release 1.0 September 2003 DTR-32D-1A TEL T elephone port s A0~C0 are ports 100~120.
92 – Chapter 4 DRAFT 3 MOH or Ring Back Tone Selection, 4 - 66 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 4 - 66 System Mode 4 Submode — Data No.
Xen IPK Programming 4 - 66, MOH or Ring Back T one Selection DRAFT 3 Chapter 4 – 93 Doc. No.: 8283 - Release 1.0 September 2003 Related Programming M.
94 – Chapter 4 DRAFT 3 LCD Line Key – Name Assignment, 4 - 68 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 4 - 68 System Mode 4 Submode — Data No.
Xen IPK Programming 4 - 68, LCD Line Key – Name Assignmen t DRAFT 3 Chapter 4 – 95 Doc. No.: 8283 - Release 1.0 September 2003 LK Assign Default Note NON (not assigned) All Blan k CO Outside Lines.
96 – Chapter 4 DRAFT 3 Card Interf ace Slot Assi gnment, 7-1 September 2003 NEC Business Solutions Lt d Doc. No.: 8283 - Release 1.0 September 2003 7-1 System Mode 7 Submode 1 Data No. — PC Programming + BS Card Interface Slot Assignment General Descript ion Use this Memory Block to specify the type of installed ETUs.
Xen IPK Programming 7-1, Card Interf ace Slot Assignm ent DRAFT 3 Chapter 4 – 97 Doc. No.: 8283 - Release 1.0 September 2003 1 Go off-line. 2 Press LK7 + LK1 to acces s the Memory Block.
September 2003 NEC Business Solutions Lt d 98 – Chapter 4 DRAFT 3 Card Inter face Slot Assignment, 7-1 Doc. No.: 8283 - Release 1.0 September 2003 Note: Use the following to enter dat a: J to move the cursor l eft. L to move the cursor right. K ~ I to enter numeric dat a.
Xen IPK Programming 7-1, Card Interf ace Slot Assignm ent DRAFT 3 Chapter 4 – 99 Doc. No.: 8283 - Release 1.0 September 2003 KSU Power-Based ETU Quantity Limit ations The following charts indicate the ma ximum number of specific ETU combinatio ns in each KSU that are restricted by power limitations of the KSU.
September 2003 NEC Business Solutions Lt d 100 – Chapter 4 DRAFT 3 Card Interface Slot Assignment, 7-1 Doc. No.: 8283 - Release 1.0 September 2003 Card Interface Slot Assignment 4 1 C: Port Number of CO/PBX Line T : T elephone Port Number (smallest number is displayed) V : V oice Recording Service Package –: No Display B: BSU No.
Xen IPK Programming 7-1, Card Interf ace Slot Assignm ent DRAFT 3 Chapter 4 – 101 Doc. No.: 8283 - Release 1.0 September 2003 Related Programming M.B.
September 2003 NEC Business Solutions Lt d 102 – Chapter 4 DRAFT 3 Card Interface Slot Assignment, 7-1 Doc. No.: 8283 - Release 1.0 September 2003 THIS P AGE INTENTIONALL Y LEFT BLANK.
An important point after buying a device NEC R1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC R1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC R1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC R1000 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC R1000 will certainly help you make a decision on the purchase.
If you already are a holder of NEC R1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC R1000.
However, one of the most important roles played by the user manual is to help in solving problems with NEC R1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC R1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
