Instruction/ maintenance manual of the product PDWXS 46-55 L NEC
Go to page of 9
– 1 – W all mount User’ s Manual Manuel de l’utilisateur du montage mural Manual de usuario para el montaje en par ed Bedienungsanleitung zur W andbefestigung Manuale Utente della staf fa a mu.
– 2 – Caution DO NOT moun t the monitor yourself. Ask your dealer for assistance. • Fo r pr ope r in st all at ion it is str ong ly r ec omm en ded to u se a t rai ne d, qualified technician. Read this user’ s manual and the user’ s manual of the monitor carefully • before using.
– 3 – Installation Procedure/Procédure d’installation/Procedimiento de instalación/ Installationsv erf ahren/Procedura d’installazione/ 設置手順 / 安装步骤 1. Attach the wall brac kets (top) and (bottom) to the wall as sho wn on the installation drawing (separate sheet).
– 4 – 2. Place a protective sheet on a tab le or other flat surface , then place the monitor on top with the back of the monitor facing up . Remov e the two optional stand holders attached to the bottom of the monitor (Fig. 2-1), then switch the monitor’ s left and r ight handles from diagonal (Fig.
– 5 – 3. Mounting the monitor brac kets Montage des suppor ts du moniteur Montaje de los sopor tes de monitor Montage der Bildschirmhalter ungen Montaggio delle staff e monitor ディスプレイ金具の取り付け 安装显示器支架 3-1.
– 6 – 3-2. When using the tilt brac kets By using the tilt brac kets, the monitor can be installed at an angle of 5° with respect to the wall. Mount the two tilt brack ets and the two monitor brac kets to the left and right sides of the back of the monitor using the included screws (M6).
– 7 – 4. Lift the monitor and hook the monitor brac kets into the V -shaped notches in the wall brack et (top) (Fig. 4). Caution: Do not release your hands from the monitor until y ou are sure it is securely fastened to the wall brack et.
– 8 – 5. Pull the bottom of the monitor slightly f orward and lift the prop at the center of the wall bracket (bottom) (Fig. 5-2) to provide space f or wires (Fig. 5-1). Caution: Do not tur n on the power or leave for long periods of time with the prop lifted.
– 9 – 6. Put the prop back in its original position, then f asten the monitor brac kets and wall brack et (bottom) using the included screws (M6). F asten at the fastening points on the left and right sides. Also , depending on the installation conditions, the fastening points on the bottom can also be used (Fig.
An important point after buying a device NEC PDWXS 46-55 L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC PDWXS 46-55 L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC PDWXS 46-55 L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC PDWXS 46-55 L you will learn all the available features of the product, as well as information on its operation. The information that you get NEC PDWXS 46-55 L will certainly help you make a decision on the purchase.
If you already are a holder of NEC PDWXS 46-55 L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC PDWXS 46-55 L.
However, one of the most important roles played by the user manual is to help in solving problems with NEC PDWXS 46-55 L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC PDWXS 46-55 L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
