Instruction/ maintenance manual of the product D3351 Asko
Go to page of 40
Use & Care Guide Dishwasher ASK O D3351.
2 Dear ASKO customer! Congr atulations on your excellent product choice and welcome to the Asko family . A global family with its roots in Scandinavia. Cleaning results, design, environmental impact on nature and home, user-friendliness, low consumption of time, energ y and water , a long life span, r eliability .
3 Contents Page Contents 3-4 Before doing your first wash 5 Read through the directions for use T ak e care with cer tain materials Check the door Check the water hardness level Machines with water so.
4 Settings 24-26 Reprogramming Child-safe button lock Super rinse Setting water hardness Fault indications 27 T r oub leshooting 28-30 The dishes are not clean Stains or a film on the china The china .
5 Bef ore doing y our first wash Read through the directions for use Read the directions of use bef ore star ting to use your machine , especially the Saf ety , Child Safety and Basic Course sections.
6 Safety General: • Read and keep the directions for use! • Installation of water , drainage and elec- tricity must be carried out by a qualified professional. • Do not use the dishwasher for any pur- poses other than those stated in these directions for use.
7 Child-safe dishwashing • Use the knife box or knife stand for all long/ sharp items. • Alwa ys close the door and star t the program immediately once dishwasher detergent has been added. • K eep children awa y from the dishwasher when it is open.
8 P ar ts of the dishwasher* T echnical inf ormation Height Width Depth Weight Capacity** W ater pressure Connection Max output Accessories * Details may differ depending on model and market! **In accordance with standard, AS/NZS 2007. ***See type plate.
9 Baskets* Upper basket Lower basket Cutlery basket *Details may differ depending on the model and market! 1. Wine glass shelf 2. Cup rack 3. Folding plate stand 4.
10 PROG PROG ST ART ST ART S T A R T STOP STOP S T O P E ST ART ST ART END END AUT AUT 1. Program selector 2. Auto wash 3. Heavy wash 4. Normal wash 5. Delicate wash 6. Quick wash 7. Rinse & Hold 8. Star t/Stop Contr ol panel 9. Upper / Lower basket 10.
11 Basic Course Below are step by step instructions to help you achieve the best possible dishwashing results. Load the baskets correctly! Y our dishwasher has a Super Clean- ing System™, which means that there is no need to rinse the dishes before washing.
12 NB! Only use dishwasher detergent Detergent for washing by hand cannot be used as the build-up of foam impedes the machine’ s perf or mance. Press the P ower main switch and close the door Select program Select a program by pressing the program button one or more times until the required program symbol lights up .
13 Options Delayed start • If y ou want the machine to star t up later , press the ‘delay ed star t’ option button as many times as required for the number of hours’ dela y bef ore star ting (1-12 h). A clock symbol lights up and the number of hours until the star t appears in the display window .
14 Press start The dishwasher will no w star t. It manages the entire wash automatically . Close the door properly , or the machine will not star t. Changing options If you want to change program after having star ted the machine, press the Star t/Stop b utton f or three seconds.
15 Eco-dishwashing Only wash with a full load W aiting to run the wash until the machine is full sav es energy . W ash at a lower temperature If the load is only lightly soiled, you can lower the temperature.
16 Fragile dishes A number of household goods are not suit- able f or machine washing. There can be many reasons f or this. Cer tain mater ials cannot withstand intense heat, others can be damaged by the dishwasher detergent. Fragile decoration China with decoration on top of the glaze (the ar ticle has a rough feel) should not be machine washed.
17 Standar d program Water Temp . °C Dry i ng Pre - was h Ma in was h °C Rins es Fi nal ri ns e °C Fan Col d wat er (20°C ) Warm wat er (60°C) Lit res Col d wat er (20°C) Warm wat er (60°C) A u.
18 This page is empty for printing reasons.
19 When you have selected a program, the display shows the length of time the pro- gram took the last time it w as used. When you ha ve star ted the machine, the displa y window shows an approximate duration.
20 Cleaning Cleaning The dishwasher’ s inner container is made of stainless steel and is kept clean through nor mal use. Howe ver , if you ha v e calcif erous (hard) water , lime deposits can form in the dishwasher . In this case, r un a nor mal wash program with two tablespoons of citric acid in the dishwasher detergent compar tment.
21 If you still cannot start the machine and a humming noise can be heard, then the overfilling protection has been activated. • Shutoff the water • Remove the plug from the wall socket • Call Service CA UTION! Do not forget to replace the pump plug.
22 Rinse aid Select dosage The dispenser is usually set at 1=soft water . How e ver , depending on the water hardness you may need to change the dosage. Open the rinse aid cover . Here you will find the dispenser’ s adjustment dial. Settings 1-6: the harder the water , the higher the dosage.
23 Salt P our in salt Before using a dishwasher with a water softening filter , you must fill the salt com- par tment with salt. Use coarse salt or spe- cial salt for dishwashers. It is best to fill with salt when you are about to do a wash, as the dishwasher needs to be rinsed out immediately after filling.
24 Settings Reprogramming Some of the machine’ s functions can be reprogramd. Y ou get into the machine’ s change program using the machine’ s ordinar y buttons as per the instructions below . The selection will be retained until the next time you reset this function.
25 Super rinse Super rinse means that two extra rinses will be addes at the end of the main dish. Cannot be used in the Quick wash and Rinse & Hold programs. 1 . Switch off the dishwasher with the main switch. + 2. Hold in the Express b utton while pressing the main s witch.
26 Setting water hardness If you ha ve a dishwasher with a w ater softener , you ma y need to change the setting, de- pending on the hardness le v el of the water . Phone your local W ater Board to check the w ater hardness in your area. The dishwasher is set f or low water hardness on deliv er y .
27 F ault indications Display T ype of fault Action T oo much w ater in the machine Phone service F ault with w ater inlet Check that the tap is open V alve leakage Shut off the tap and phone for serv.
28 T r oubleshooting Problems P ossible causes Action • The spra y ar ms are not rotating. • Old dishwasher detergent. NB! Detergent is a perishable. • Incorrect dosage of detergent. • Insufficiently powerful dishwashing program. • Incorrect program chosen.
29 Problems P ossible causes Action • T oo high dosage of r inse aid. • Cer tain food remnants such as mustard, mayon- naise, lemon, vinegar , salt and dressings can cause stains on stainless steel if allowed to remain for any length of time. All stainless steel can mark silver if allowed to come into contact during the dishwashing process.
30 Problems P ossible causes Action W ater remains in the machine. Bad odour in the machine The dishes are not sufficiently dry pump) can be heard from the machine, this does not stop when the power is switched off using the main power switch. • Obstruction in the drain hose.
31 T est dosage Heavy wash/Normal wash Main wash 25 gram Standard detergent. Rinse aid dosage 3. Energy labelling Australia: AS/NZS 2007 Dishwasher program: Normal wash, 45°C Economyl drying Program time: 100 minutes. Connection: Cold water T est method noise measurement: IEC-704-3 Example of dishwasher loading AS/NZS 2007.
32 Suggestions for positioning the dishwasher The dishwasher can be built in, fully free- standing or semi-freestanding. CA UTION! Connection to electricity , water and dr ain- age must be carried out by a suitably quali- fied person. A. Built-in The dishwasher can be built in under a worktop with a working height of 820 - 87 0 mm.
33 Connection to water There must be a shut-off tap on the water supply pipe. The shut-off tap should be positioned above the work surface or at the front of the sink unit. The water supply pipe has a connection with a 1/2” or 3/4” internal thread depending on countr y .
34 P ositioning the machine A. Adjusting machines with 6 feet (freestanding dishwasher) 1. Adjust the height of the dishwasher with the four steel feet. 2. Lock the feet with the nuts. NB! The dishwasher must not be allo wed to lean more than 5 mm. 3.
35 T o pre v ent kinks, pull the dr ain hose and the connecting pipe. Adjusting the plinth (Only with kick-plate as accessory) The dishwasher has two kick-plates (some models). The taller one should be used if the machine is to be 850 - 870 mm high and the plinth depth can be v ar ied between 45 - 105 mm.
36 Setting water hardness If you ha ve a dishwasher with a w ater softener , you ma y need to change the setting, de- pending on the hardness le v el of the water . Phone your local W ater Board to check the w ater hardness in your area. The dishwasher is set f or low water hardness on deliv er y .
37 Service & guarantee Service Before calling for service, check to see whether the faults are due to something that you can put rectify . See T rouble shooting pages 28-30 .
38 Own comments.
39 Sear c h w or ds A Advice! 7, 14 After dishwashing 14 C Child safe 3, 5, 7, 24 Child safety lock 7 Citric acid 20, 22 Cleaning 6, 20, 21, 29 Connection 8, 17, 30, 31, 32 Control panel 10, 22 Crysta.
40 Ar t. No: 80 786 04. Rev . 02• W e reser ve the right to mak e changes. Disclaimer! Not all models contain all the features listed in this manual. Printed on environmentally-friendly paper which meets the demands of F r iends of the Ear th and the Swedish Society for Nature Conservation.
An important point after buying a device Asko D3351 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asko D3351 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asko D3351 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asko D3351 you will learn all the available features of the product, as well as information on its operation. The information that you get Asko D3351 will certainly help you make a decision on the purchase.
If you already are a holder of Asko D3351, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asko D3351.
However, one of the most important roles played by the user manual is to help in solving problems with Asko D3351. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asko D3351 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
