Instruction/ maintenance manual of the product MultiSync LCD19WV NEC
Go to page of 17
LCD19WV LCD22WV User ’ s Manual.
English English-1 Declaration Declaration of the Manufacturer TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED.
English-2 For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
English English-3 Contents Y our new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord •V ideo Signal Cable • User ’s Manual • CD-ROM • Base Stand • Cable Holder Quick Start To attach the Base to the LCD Stand: 1.
English-4 3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the V ideo Signal Cable and power cord together ( Figure B.1 ). 4. T o attach the Cable Holder: Attach the Cable Holder on to the Base.
English English-5 Figure R.1 Non-abrasive surface Figure R.2 Removing the Base NOTE: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface ( Figure R.1 ). 2. While using your thumbs, press the bottom tabs upward to unlock.
English-6 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic Key function Button OSD Off OSD ON (Icon selection stage) OSD ON (Adjustment stage) OSD Lock 2.
English English-7 Luminance Contrast Contrast from Digital-register . Brightness Backlight Adjustment. Image Setup Focus Adjusts Picture Phase to reduce Horizontal-Line noise. Clock Adjusts picture Clock to reduce V ertical-Line noise. Image Position H.
English-8 OSD Locked When the OSD is unlocked, keep holding down “Menu” key and press “Power” key once to turn on the monitor , the OSD will be locked and show this message. When the OSD is locked, only Power key function is still working, if user presses any other key it will also show this message.
English English-9 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-10 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English English-11 Specifications - LCD19WV Monitor Specifications LCD19WV Monitor Notes LCD Module Diagonal: 48.1 cm/19 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 48.
English-12 Specifications - LCD22WV Monitor Specifications LCD22WV Monitor Notes LCD Module Diagonal: 54.9 cm/21.6 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.
English English-13 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another .
English-14 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position.
English English-15 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
English-16 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
An important point after buying a device NEC MultiSync LCD19WV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC MultiSync LCD19WV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC MultiSync LCD19WV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC MultiSync LCD19WV you will learn all the available features of the product, as well as information on its operation. The information that you get NEC MultiSync LCD19WV will certainly help you make a decision on the purchase.
If you already are a holder of NEC MultiSync LCD19WV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC MultiSync LCD19WV.
However, one of the most important roles played by the user manual is to help in solving problems with NEC MultiSync LCD19WV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC MultiSync LCD19WV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
