Instruction/ maintenance manual of the product MultiSync LCD175M NEC
Go to page of 17
MultiSync LCD175M User ’ s Manual.
Index W arning, Caution ............................................................................................................... .......... English-1 Registration Information .....................................................................
English English-1 W ARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . T O FULL Y DISENGAGE THE POWER TO THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK).
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English English-5 Setup Manual Figure 1 Figure 2 Contents Y our new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt base • Audio Cable • Power Cord.
English-6 T ilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired ( Figure TS.1 ). Figure B.1 Cable management cover AUDIO INPUT D-Sub (Input1) Connect to Computer audio output Figure C.
English English-7 Figure R.1 Non-abrasive surface Figure R.2 Figure R.3 Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm.
English-8 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic function at pressing each key 2. OSD structure Showing OSD. Shortcut to Bright adjust window . Button At No OSD showing Shortcut to V olume adjust window .
English English-9 AUDIO Controls the volume of the speakers or headphones. To mute the speaker output, press the “1 2/RESET” button. BRIGHTNESS Adjusts the overall image and background screen brightness. To enter the ECO MODE, press the “1 2/RESET” button.
English-10 LANGUAGE OSD control menus are available in nine languages. OSD TURN OFF The OSD control menu will stay on as long as it is in use. In the OSD T urn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu.
English English-11 Specifications Monitor Specifications MultiSync LCD175M Monitor Notes LCD Module Diagonal: 43 cm/17 inches Active matrix, thin film transistor (TFT) liquid V iewable Image Size: 43 cm/17 inches crystal display (LCD); 0.
English-12 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and light weight allow it to be moved or transported easily from one location to another .
English English-13 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position.
English-14 TCO Displays 5.0 Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
English English-15 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
An important point after buying a device NEC MultiSync LCD175M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC MultiSync LCD175M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC MultiSync LCD175M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC MultiSync LCD175M you will learn all the available features of the product, as well as information on its operation. The information that you get NEC MultiSync LCD175M will certainly help you make a decision on the purchase.
If you already are a holder of NEC MultiSync LCD175M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC MultiSync LCD175M.
However, one of the most important roles played by the user manual is to help in solving problems with NEC MultiSync LCD175M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC MultiSync LCD175M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
