Instruction/ maintenance manual of the product MD215MG NEC
Go to page of 21
MD2 15MG.
Disclaimer * Windows and MS-DOS are trademarks and/or registered trademarks of Microsoft Corporation in the United States and/or other countries. * VESA is a trademark of the V ideo Electronics Standard Association. * All other products and company names are trademarks of their respective owners.
English.
English-1 English Inde x Registration Information ...............................................................................................................English-2 Intended Use ...................................................................
English-2 Registration Inf ormation Dec laration Means of Conformity Device Classifi cation: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.
English-3 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE.
English-4 Intended Use The MD215MG grayscale display is intended to be used for displaying and viewing of digital images for diagnosis, including digital mammography , by trained physicians. Caution: The MD215MG grayscale display cannot be used for a life-support system.
English-5 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD GRA YSCALE MONITOR: • DO NO T OPEN THE MONIT OR OR AC AD APTER.
English-6 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English-7 English Contents Y our new NEC monitor box* should contain the following: • MD215MG monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D.
English-8 Quic k Star t T o connect the LCD monitor to your system, follow these instructions: NO TE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller that can output a resolution of 2048 x 2560 is needed.
English-9 English 5. T o keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly ( Figure D ). Figure D 6. Slide down the cable cover ( Figure E ). 7.
English-10 Contr ols 1 Power Switch T o turn the monitor on and off. 2 LED Indicates that the power is on. T urns off automatically , when the luminance is stabilized. 3 Front Sensor For luminance stabilization and calibration. 4 Ambient Light Sensor Measures ambient light during calibration process.
English-11 English Specifi cations Monitor Specifi cations MD215MG Notes LCD panel color Clear Base LCD 21.3-inch (54 cm), monochrome, TFT active matrix, anti-glare Pixel pitch (H x V) 0.
English-12 Additional Installation Inf ormation Adv anced OSD Several control functions are available by entering the advanced OSD. These control functions are additional OSD menu items, which are always accessible after opening the standard OSD.
English-13 English 3. After selecting your preferred EDID mode, hold down the (+) plus button and the (-) minus button simultaneously for over 2 seconds again. Then confi rm the EDID line (Portrait/Landscape) on the “INFORMA TION” OSD. 4. Click the (+) plus button or (-) minus button once to close the “INFORMA TION” OSD.
English-14 How to Change Confi guration (Preset 1, 2, 3) The NEC model MD215MG is shipped with 3 factory preset confi gurations, as listed below . Confi guration Luminance (cd/m 2 ) Gamma Remark Maximum Minimum Ambient 1 400 1.0 0.0 DICOM [Factory Default] 2 430 1.
English-15 English Adv anced OSD Controls without video input If no video signal is available, the display enters the power save mode and the OSD cannot be displayed. In this case, please follow the procedure below . 1. Confi rm that the display is in power save mode and the LED next to the power switch is lit orange.
English-16 Antitheft Security Slot The display is equipped with the security slot supported by MicroSaver Security Lock System by Kensington T echnology Group. The MicroSaver locks are available at PC supply stores. Note: Kensington is the registered trademark of Kensington T echnology Group.
English-17 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
NEC Display Solutions, Ltd. MS Shibaura Building, 13-23, Shibaura 4-chome, Minato-ku, T okyo 108-0023 Japan NEC Display Solutions of America 500 Park Blvd.
An important point after buying a device NEC MD215MG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC MD215MG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC MD215MG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC MD215MG you will learn all the available features of the product, as well as information on its operation. The information that you get NEC MD215MG will certainly help you make a decision on the purchase.
If you already are a holder of NEC MD215MG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC MD215MG.
However, one of the most important roles played by the user manual is to help in solving problems with NEC MD215MG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC MD215MG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
