Instruction/ maintenance manual of the product MA4000 NEC
Go to page of 280
NEC NEC Infrontia, Inc. MA4000 Inst allation Manager User Guide August 2008 NDA-30580, Revision 7.
Liability Disclaimer NEC Infrontia, Inc. reserves th e ri ght to change the specifications, functions, or features, at any time, without notice. NEC Infrontia, Inc. has prepared this document for the exclusive use of its employees and customers. The information contained herein is the property of NEC Infrontia, Inc.
i MA4000 Installation Manager User Guide - Revision 7 Content s Introduction 1-1 MA4000 Inst allation Manager Ove rview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 How This Guide is Organized . . . . . . . . . . . . . . . . . . . .
ii Content s MA4000 Installation Manager User Guide - Revision 7 Pull-Down Men us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents iii MA4000 Installation Manager User Guide - Revision 7 System Information 6-1 S tat ion Range s T ab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Access Codes T ab. . . . . . . . . . . . . .
iv Content s MA4000 Installation Manager User Guide - Revision 7 Reports 12-1 Creating and Printing a Report or DESI Label . . . . . . . . . . . . . . . . . . . . . . . . 12-2 Productivity Features 13-1 Configura tion T ab . . . . . . . . . . . . . . .
v MA4000 Installation Manager User Guide - Revision 7 Figures Figure T itle Page 2-1 Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 2-2 Installation Manager R25 - InstallShield Wizard Welcome .
vi Figures MA4000 Installation Manager User Guide - Revision 7 3-30 Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25 3-31 FLCVTR Initial . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures vii MA4000 Installation Manager User Guide - Revision 7 5-7 Hardware Information - Media Gateway and Circuit Ca rds Tab . . . . . . . 5-9 5-8 Female DB9 to Female DB9 Straight Through Cable examp le . . . . . . . 5-10 5-9 New Circuit Card - IPX Example .
viii Figures MA4000 Installation Manager User Guide - Revision 7 7-22 Advanced Features - OAI Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25 7-23 Edit OAI - New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures ix MA4000 Installation Manager User Guide - Revision 7 8-37 Column Match - Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-39 8-38 User Import Wi zard - Completing User Import Data . . . . . . . . . . . . . . . 8-40 8-39 Save As - Export Users .
x Figures MA4000 Installation Manager User Guide - Revision 7 11-14 Installation Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15 12-1 Reports - General Tab . . . . . . . . . . . . . . . . . . . . . . . . . . .
xi MA4000 Installation Manager User Guide - Revision 7 Ta b l e s T able Title Page 2-1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 3-1 Options to Activate the UNIVERGE SV8500 . . . . . . . . .
xii T ables MA4000 Installation Manager User Guide - Revision 7.
1-1 MA4000 Installation Manager User Guide - Revision 7 1 Introduction The MA4000 Installation Man ager User Guide provides the information needed to operate the Installation Manager application.
1-2 Introduction MA4000 Installation Manager User Guide - Revision 7 How This Guide is Organized Chapter 1 Introduction This chapter outlines how to use th is manual, including actual manual organization, chapter layout, keyboard con ventions, function k eys, and basic terminology for the MA400 0 Installation Manager application.
Introduction 1-3 MA4000 Installation Manager User Guide - Revision 7 MA4000 Inst allation Manager Application Abbreviations CCIS Common Channel Inter-office Signaling CSR Customer Service Representati.
1-4 Introduction MA4000 Installation Manager User Guide - Revision 7.
2-1 MA4000 Installation Manag er User Guide - Revision 7 2 Getting S t arted This chapter lists the hard ware and softw are requirements necessary to operate the MA4000 Installation Manager . The chapter also pro vides the steps needed to inst all the MA4000 Install ation Manager application.
2-2 Getting S tarted MA4000 Installation Manager User Guide - Revision 7 T able 2-1 System Requi rement s Minimum Recommended Operating System Windows 98 Note: This is the bare minimum operating system.
Getting S tarted 2-3 MA4000 Installation Manag er User Guide - Revision 7 MA4000 Inst allation Manager Inst allation T o install MA4000 Installation Manager for the firs t time, use the installation CD includ ed in your MA4000 Installation Manager package.
2-4 Getting S tarted MA4000 Installation Manager User Guide - Revision 7 Figure 2- 2 Installation Manager R25 - InstallShield W izar d Welcome Ste p 5 Follow the prompt s in the Setup program to accept the sof tware licensing agreement, to enter your cu stomer information, and to select the setup type.
Getting S tarted 2-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 2- 3 Installation Manager R25 - InstallShield W izar d Complete Ste p 7 Click the Finish button. The Inst allation Manag er R25 - Inst allShield Install Feature(s) displays ( Fig ure 2-4 ).
2-6 Getting S tarted MA4000 Installation Manager User Guide - Revision 7 Figure 2- 4 Installation Manager R25 - InstallShield Inst all Fea ture(s) Ste p 8 Select the appropriate check box to inst all the desired feature.
Getting S tarted 2-7 MA4000 Installation Manag er User Guide - Revision 7 Initializing the Flash Card and Inst alling the System Soft ware (SV7000 MPS Only) The following procedure contains a step which can result in the loss of existing dat a on your computer if performed improperl y .
2-8 Getting S tarted MA4000 Installation Manager User Guide - Revision 7 St ep - b y - Ste p P r oc e du r e T o initialize the flash card, in stall it in the server , and loa d the MPS system software do the following: Ste p 1 Insert the MPS system so ftware CD into your computer , then reboot.
Getting S tarted 2-9 MA4000 Installation Manag er User Guide - Revision 7 Ste p 7 T ype the following at the comman d prompt, the press Enter : mount /dev/hdc /mnt/cdrom Replace hdc in the command, if necessar y , with the designation your laptop uses for the internal CD- ROM device.
2-10 Getting S tarted MA4000 Installation Manager User Guide - Revision 7 Step 18 Connect an ethernet cab le be tween your laptop and the Ether1 jack on the front of the MPS. — Y ou must use a crossover Ethern et cable, not the more common straight-through type.
3-1 MA4000 Installation Manag er User Guide - Revision 7 3 Graphical User Interface This chapter provides an o verview of the components of the MA4000 Installation Manager software.
3-2 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 If multiple rows are selected the display will be listed in the form [last selected row] of [total rows] ( see Figure 3-2).
Graphical User Interface 3-3 MA4000 Installation Manag er User Guide - Revision 7 Selectin g All list box es will support the ability to multi-select items.
3-4 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 5 Edit Multiple Records example List Box Sorting All lists will hav e the ability to sort. Clicking on the title bar of a column causes the list to be sorted alphabetic ally by that column.
Graphical User Interface 3-5 MA4000 Installation Manag er User Guide - Revision 7 S t artup Dialog MA4000 Installation Manager projects are not comprised of a single file like a spreads heet or document. Instead, the projec t is consists of information contained in a database.
3-6 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Projects T ab Figure 3- 8 Projects T ab New button Y ou will have sever al choices to make. Some of the most powerful features of MA4000 Installation Manager is the ability t o re-use previous data.
Graphical User Interface 3-7 MA4000 Installation Manag er User Guide - Revision 7 Create Project Wizard Ste p 1 The W elcome to the Cr ea te Project Wizard greets you and infor ms you that the wizard will be guiding you thro ugh the steps necessary to create a new project.
3-8 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3-1 1 Create Project Wizard - Project Name and T ype - NEAX IPX UMG.
Graphical User Interface 3-9 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 12 Create Project Wizard - Project Name an d T ype - UNVERGE IPX .
3-10 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 13 Create Project Wizard - Project Name and T ype - UNIVERGE SV7000.
Graphical User Interface 3-1 1 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 14 Create Project Wizard -Project Name and T ype - UNIVERGE SV8500 Ste p 2 The Create Proje ct Wizard - Project Name and T ype dialog box allows you to enter a name for the project.
3-12 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 • NEAX IPX UMG: None — Select the maximum chassis count from the V irtual Chassis Count drop-down menu.
Graphical User Interface 3-13 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 16 Create Project Wizard - Customer Locations Ste p 5 The Create Project Wizard - Customer Loca tions is similar to the Customer Organization ( St e p 6 ).
3-14 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 17 Create Project Wizard - Customer Organization Ste p 6 The Create Project Wizard - Customer Or ganization allows you to name the levels in a customer's organization.
Graphical User Interface 3-15 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 18 Create Project Wizard - V oice Mail Ste p 7 The Create Project Wizard - V oice Mail allows you to choose from any supported voice mail system.
3-16 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 19 Create Project Wizard - Customer Contact Information Ste p 8 The Create Project Wizard - Custo mer Cont act Information allows you to enter details ab out the customer that is custom to this new project.
Graphical User Interface 3-17 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 20 Completing the Create Project Wizard Ste p 9 The Completing the Create Project Wizard i s the last panel you will encounter as p art of the Create Project Wizard .
3-18 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 •I m p o r t button Ste p 1 Click the Import button as shown in Figure 3-21 .
Graphical User Interface 3-19 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 22 Import Project Ste p 2 Select an existing project and click th e Open button. Th e selected project now appears in the Select Project: se ction of th e Installation Manager S tartu p .
3-20 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 • Delete All button Ste p Click the Delete All button. Figure 3- 24 will display . Figure 3- 24 Delete All Projects Confirmation • Clicking t he Yes button de letes a project entirely and removes the project from the database.
Graphical User Interface 3-21 MA4000 Installation Manag er User Guide - Revision 7 Te m p l a t e s Ta b Figure 3- 25 Te m p l a t e s Ta b • New button Highlighting a template lis ted in the Select T emplate: section, and cl icking the New button, will show the same Figure 3-9 through Figure 3-20 dialog bo xes as the Project T ab display ed.
3-22 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 26 Import T empla te Ste p 2 Select the template to import from those te mplates listed, and click the Open button. • Delete butt on Ste p 1 Select a template from the list located in the Installation Man ager S tartup ( Figure 3-7 ).
Graphical User Interface 3-23 MA4000 Installation Manag er User Guide - Revision 7 • Delete All button Ste p Click the Delete All button. Figure 3- 28 will display . Figure 3- 28 Delete All Projects Confirmation • Clicking t he Yes button de letes a template entirely and removes the template from the database.
3-24 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Pull-Down Menus File Menu The File pull-down menu contains these file functions: • C reate Proj ect ... • Open Project .. . • Save As — Pro ject ... — Templ ate .
Graphical User Interface 3-25 MA4000 Installation Manag er User Guide - Revision 7 Copy (Ctrl+C) Ste p 1 Select an item (this could be the context of a text box, or it could be multiple items in a list). Ste p 2 After a selection is made , press the Ctrl and C keys.
3-26 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 card, or backup data by reading data f rom the flash card to th e personal computer . See Figure 3-31 . T o launch the Flash Card Wizard, do the following: Ste p From Microsoft Desktop, select Start > Programs > Inst allation Manager 24 > Flash Card Wizard .
Graphical User Interface 3-27 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 32 FLCVTR Initial Installation Execute Ste p 1 Insert an unformatted flash card into an available PCMCIA slot. Ensure you insert a flash ca rd prior to lau nching the FLCVTR pr ogram in order to display the PC’s PCMCIA slot for the Fl ash Card field.
3-28 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 33 Setting INITDA T A Ste p 6 Enter the IP Address, Subnet Mask and Gateway of the SV7000, then click the Set button. This option only applied to the SV7000, and is not available for a NEAX 2400 IPX.
Graphical User Interface 3-29 MA4000 Installation Manag er User Guide - Revision 7 • If the Progr am Upgrade Execute button is clic ked, Figure 3-34 displays. Figure 3- 34 FLCVTR Program Upgrade Execute Ste p 1 Insert the flash card containin g the program files into an available PCMCIA slot.
3-30 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 •I f t h e D a t a B a c k u p Execute button is clicked, Figure 3-35 displa ys. Figure 3- 35 FLCVTR Data Backup Execute Ste p 1 Insert the flash card containin g the program files into an available PCMCIA slot.
Graphical User Interface 3-31 MA4000 Installation Manag er User Guide - Revision 7 Registration W izard ... The Registration Wizard screens that di splay for the UNIVER GE SV8500 system will be different from the screens shown in the following example.
3-32 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 37 NEC Registration Wizard - W e Want T o Know About Y ou Ste p 2 Select the Next button to continue.
Graphical User Interface 3-33 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 38 NEC Registration Wizard - Site Information Ste p 3 Enter the site information r equest ed. Those fields denoted with an asterisk require an entry . Ste p 4 Click the Next button to continue.
3-34 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 39 NEC Registration Wizard - Complete Y our NEC Registration Ste p 5 Click the Next button.
Graphical User Interface 3-35 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 40 NEC Registration Wizard - Select System to A ctivate Ste p 6 Select the appropriate system from the list pr ovided. — Direct Connection to t he System . Enter the communica tion port and baud rate.
3-36 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 41 NEC Registration Wizard - Gather Security Codes from System - SV7000 Example Ste p 8 Click Get System Information to connect your system and obtain/ update the hardwar e and sof tware key codes, th en click the Next .
Graphical User Interface 3-37 MA4000 Installation Manag er User Guide - Revision 7 T able 3-1 Options to Activate the UNIVERGE SV8500 Obtain SV I File Upload SVI File Activate Step 1. Login to the License Management Server (LMS) and download the SVI.zip file.
3-38 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 42 NEC Registration Wizard - Registration Information Ste p 9 In the Modem Configuration Section , enter or select the correct information into the Modem Name and Registration Serve r Dialing Number fields.
Graphical User Interface 3-39 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 43 NEC Registration Wizard - Activate Y our System Step 12 T o activate y our system, click the Next button.
3-40 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Figure 3- 44 NEC Registration Wizard - System Activation Step 13 Select the Send Activation Licen se button to activa te your system. Step 14 Select the Next button to proceed.
Graphical User Interface 3-41 MA4000 Installation Manag er User Guide - Revision 7 Figure 3- 45 NEC Registration Wizard - Congratulations Step 15 Click the Finish button to exit th e Registration Wizard .
3-42 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 License V erification T ool ... SV8500 does not support the License Verification T ool function. The License V erification T ool provides a brief summary of the primary licenses that are av ailable (and in use) on y our SV7000 system.
Graphical User Interface 3-43 MA4000 Installation Manag er User Guide - Revision 7 Clipboard has been enhanced to be able to perform batch downloads. Y ou have the ability to: • Download data from the switch ba sed on categories (for exam ple, Station Data, T runk Data, Restricted Data, etc.
3-44 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7 Help M enu The Help pull-down menu is the place to go for assistance or information. Help Index … The Help Index... option displays the HTML, context sensitiv e help for the MA4000 Installation Manager application.
Graphical User Interface 3-45 MA4000 Installation Manag er User Guide - Revision 7 Primary Sections The buttons located along the left side of the gr aphical user interface in the Main window (see Figure 3-48 ) contain the core functions of MA4000 Installation Manager .
3-46 Graphical User Interface MA4000 Installation Manager User Guide - Revision 7.
4-1 MA4000 Installation Manag er User Guide - Revision 7 4 Project Information This chapter describes the MA4000 Instal lation Manager’ s Project Information section ( Fi gure 4-1 ) tabs.
4-2 Project Information MA4000 Installation Manager User Guide - Revision 7 Primary Cont act T ab The Primary Contact tab ( Figure 4- 2 ) is used to provide cont act information for a sing le person who will be the centr a l point of c ontact for the entire installation.
Project Information 4-3 MA4000 Installation Manager User Guide - Revision 7 Tit l e field Enter the primary contact’ s title. Phone field Enter the primary contact's primary phone number . Ext field Enter the exte nsion, if an y , of the primary contact.
4-4 Project Information MA4000 Installation Manager User Guide - Revision 7 Comp any Organization T ab The Company Organization tab ( Figure 4- 3 ) provides y ou with set fields allowing you to describe the company . This is usually information on the company where the sy stem is being i nstalled.
Project Information 4-5 MA4000 Installation Manag er User Guide - Revision 7 for each installation. In Figure 4-3 , the locations are broken down by Building then by Floor . This information will be us ed in repo rts to help ident ifying locations for all telep hone stations .
4-6 Project Information MA4000 Installation Manager User Guide - Revision 7 • New button The New button will allow y ou to define a new location. See Figure 4-5 . Figure 4- 5 New Location If the location al ready exists, y ou will receive an error message stating the location exists.
Project Information 4-7 MA4000 Installation Manag er User Guide - Revision 7 • Delete button T o use the Delete button, you must first select a branch or a leaf element of the tree. Clicking the Del ete button will displa y the Confirmation - Delete This Item ( Figure 4-6 ).
4-8 Project Information MA4000 Installation Manager User Guide - Revision 7 Organization secti on The Organization section allows y ou to define the company structure from an organization point of vi ew . Y ou can break the company down into departments, divisions, and groups.
Project Information 4-9 MA4000 Installation Manag er User Guide - Revision 7 • New button The New button is used to create a new entry into the company organization.
4-10 Project Information MA4000 Installation Manager User Guide - Revision 7 • Configure button The Co nfigure button allows you to define the names of the locations within the customer’ s buildings. Figure 4-11 displays the fiel ds used to define the organization levels.
Project Information 4-1 1 MA4000 Installation Manag er User Guide - Revision 7 Ta s k s Ta b The Tasks tab ( Figure 4-12 ) allows y ou to create a task list to manage items that must be completed t o ha v e a successful installation. Each row in the list box represents a task.
4-12 Project Information MA4000 Installation Manager User Guide - Revision 7 •E d i t button In order to use the Ed it button, a task mus t be selected .
Project Information 4-13 MA4000 Installation Manag er User Guide - Revision 7 Figure 4- 14 Edit Date - General.
4-14 Project Information MA4000 Installation Manager User Guide - Revision 7 • New button The New button will add the current information to the task list.
Project Information 4-15 MA4000 Installation Manag er User Guide - Revision 7 Phased Inst allation T ab The Phased Installation tab is intended for advanced users only! The Phased Installation tab ( F.
4-16 Project Information MA4000 Installation Manager User Guide - Revision 7 Figure 4- 17 Project Information - Phased Installation T ab.
Project Information 4-17 MA4000 Installation Manag er User Guide - Revision 7 • Edit or New button When the Edit or New button is clic ked, Figure 4-18 displays. Figure 4- 18 Phased Installation - New or Edit Button — Enter the appropriate information, as needed, in the Description and Notes fields.
4-18 Project Information MA4000 Installation Manager User Guide - Revision 7.
5-1 MA4000 Installation Manag er User Guide - Revision 7 5 Hardware Information This chapter describes the MA4000 Instal lation Manager’ s Hardware Information section tabs (see Figure 5-1 ).
5-2 Hardware Inform ation MA4000 Installation Manager User Guide - Revision 7 Options T ab Use Figure 5-2 (Options T ab) to configure miscellaneous system options . Figure 5- 2 Hardware Information - Options T ab Project Name field This is the name of the project d a tabase.
Hardware Information 5-3 MA4000 Installation Manag er User Guide - Revision 7 Dual CPU check box Select to identify when redundant SV8500 and SV7000 T10 processors are used. Dual Time Divi sion check box Select to identify when redundant SV7000 T10 processors are multiplexing.
5-4 Hardware Informat ion MA4000 Installation Manager User Guide - Revision 7 • IP Phone Type field Allows specification of the IP Phone support needed in MA4000 Installation Manager . This setting determines what options are mad e av ailable in other areas of MA4000 Installation Manager .
Hardware Information 5-5 MA4000 Installation Manag er User Guide - Revision 7 User ID and Password fields (optional) The User ID and Password fields can be used if authenticati on is required. T est button Clicking the Test button performs a ve rification of the system connection selected.
5-6 Hardware Inform ation MA4000 Installation Manager User Guide - Revision 7 Figure 5- 4 Edit IP Configuration - UNIVERGE SV8500 Example.
Hardware Information 5-7 MA4000 Installation Manag er User Guide - Revision 7 Figure 5- 5 Edit IP Configuration - UNIVERGE SV7000 and IPX, NEAX IPX, and NEAX IPX DM Example.
5-8 Hardware Inform ation MA4000 Installation Manager User Guide - Revision 7 Figure 5- 6 Edit IP Configuration - NEAX IPX UMG.
Hardware Information 5-9 MA4000 Installation Manag er User Guide - Revision 7 Media Gateway and Circuit Cards The Media Gateway and Circuit Cards ( Figure 5-7 ) tab is where peripheral dev ices (i.e, VS-32, MG-PRI, MG-CO T , MC-2A), Protocol Handlers, and Circuit Cards are assign ed and configured.
5-10 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Figure 5- 8 Female DB9 to Female DB9 S traight Through Cable example New button Clicking the New button displays the New Circuit Card dialog depending on the IP server . See the F igure 5-9 and Figure 5-10 examples.
Hardware Information 5-1 1 MA4000 Installation Manag er User Guide - Revision 7 Figure 5- 10 New Circuit Card - UNIVERGE SV8500 Example Select the Media Gatewa y or circuit card to be assigned. Fi gure 5-11 is an example of the dialog box that d isplays when selecting the Media Gateway - MG 1.
5-12 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Figure 5-1 1 Example - Media Gateway - MG 1.5M Edit Circuit Card Dependin g on the syste m type select ed, some of th e options will in stall automatically and will not need to b e selected.
Hardware Information 5-13 MA4000 Installation Manager User Guide - Revision 7 Edit button Edit the circuit c ard selected, chang i ng the fields as needed.
5-14 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Installation Phase The phase the device intends to install. Kind The PRI trunk type selected from the pull-down menu ( NI-2 , AT&T - 41459 , and DMS - Nortel A211 ). MAC Address The Media Access Control address for the equipment.
Hardware Information 5-15 MA4000 Installation Manag er User Guide - Revision 7 Media Gateway Setup button •S e t u p button Ste p 1 Configure a Media Ga teway device by highlig hting a predefined Media Gateway and click ing the Setup button. Figur e 5-12 displays.
5-16 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Figure 5- 13 Media Gateway Setup Wizard - Select Operation Ste p 3 Select the appropriate Comm Port , Properties , Spee d , and Duplex Mode , you wish the operation to perform, ente r the Default Gate way , if applicable, and then click the Next button.
Hardware Information 5-17 MA4000 Installation Manag er User Guide - Revision 7 Figure 5- 14 Media Gateway Setup Wizard - Select V alues Ste p 4 Update the va lues befor e continuing. Ste p 5 Connect a serial cable from the COM port on the PC to the RS232C connector on the Media Gate way unit.
5-18 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Figure 5- 15 Media Gateway Setup Wizard - Setting Media Gateway Ste p 7 When the Medi a Gatewa y setup is complete, Figur e 5-16 displays.
Hardware Information 5-19 MA4000 Installation Manag er User Guide - Revision 7 Figure 5- 16 Media Gateway Setup Wizard - Operation Completed Ste p 8 Click the Vie w Lo g button to see a list of the operation result s. Ste p 9 Click the Finish button to exit the Me dia Gateway Setup Wizard.
5-20 Hardware Information MA4000 Installation Manager User Guide - Revision 7 terminate IP-base calls. Y ou can use Installation Manager to set basic signaling server communication par ameters. Figure 5- 17 Hardware Information - Signaling Server T ab For the UNIVERE SV8500, the LMG , T ime Zone , and DNS IP Address fields do not display .
Hardware Information 5-21 MA4000 Installation Manager User Guide - Revision 7 Name (Description) field Enter a server desc ription, or use the d efault shown. Signaling Server ID field (This name must be u nique on the NEAX IPX UMG) Enter the Signaling Server’ s ID, or use the default value of 1 .
5-22 Hardware Information MA4000 Installation Manager User Guide - Revision 7 V oice Mail T ab The Voice Mail tab ( Figure 5-18 ) allows you to set and configure information used to link a user to a voice mail system. The Voice Mail tab will provide information to the MA4000 Installation Manager on how it can connect to the v o ice mail sy stem.
Hardware Information 5-23 MA4000 Installation Manag er User Guide - Revision 7 V oice M ail System V oice Mail T ype field The available op tions are <None>, NEAXMail AD-64, UNIVERGE UM4730, UM 8500 SQL Message Store, UM8500 Exchange Message Store, and <Other V oice Mail>.
5-24 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Exchan ge Infor mation Server field This is the Microsoft Ex change se rver name. Example: Mailbox Store. Mailbox Store The Mailbox St ore (similar to group) where the mailb ox es were creat ed.
Hardware Information 5-25 MA4000 Installation Manager User Guide - Revision 7 Enter the applicable station number and the phone name to be display ed. Select the R oute Re strictions and Service Restrict ions (use the default, or create a new confi gurati on) from the Route Restrictions (RSC) and Service Restrictions (SFC) dro p-down menu.
5-26 Hardware Information MA4000 Installation Manager User Guide - Revision 7 Security T ab The Security tab ( Figure 5-20 ) allows y ou to set and configure a one- time password that will prev ent unauthorized access to the SIP terminal/equipment.
Hardware Information 5-27 MA4000 Installation Manager User Guide - Revision 7 T erminal/Equipmen t Security One-Time Password field The one-time password is a di sposable password that can be used only one time. The password becomes inv alid when the time period indicated in the One-Time Password Expires field is ex ceeded.
5-28 Hardware Information MA4000 Installation Manager User Guide - Revision 7.
6-1 MA4000 Installation Manag er User Guide - Revision 7 6 System Information This chapter describes the MA4000 Instal lation Manager’ s System Information section tabs (see Figure 6-1 ).
6-2 System Information MA4000 Installation Manager User Guide - Revision 7 S t ation Ranges T ab The Station Rang es tab ( Figure 6-2 ) allows you to define r anges for various types of phone extensions and to also reserve numbers so the tool will not automatically be assigned to those ranges.
System Information 6-3 MA4000 Installation Manag er User Guide - Revision 7 St ation Range section The Station Range section lists all the station r anges that have been defined. •E d i t butt on Y ou must first select a record in the Station R ange list, then click the Edit bu tton.
6-4 System Information MA4000 Installation Manager User Guide - Revision 7 Office Code section The Area / Office Cod e field allows y ou to specify the T elco information associated with th e r ange of station numbers. Select the OK butt on to accept the changes, or the Cancel button to ignore the modifications speci fied.
System Information 6-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 6- 5 Edit Reserved St ations - General Description field Enter a meaningful description of the range being defined. St ation Range section Enter the range of extensions to be reserved.
6-6 System Information MA4000 Installation Manager User Guide - Revision 7 Figure 6- 6 Warning - Delete Reserved St ation Range(s).
System Information 6-7 MA4000 Installation Manag er User Guide - Revision 7 Access Codes T ab Special Access Codes allow access to additional system- w ide features that may not exist on individual telephones. This feat ure may be restricted using the Service F eature Rest rictions (SFC) settings.
6-8 System Information MA4000 Installation Manager User Guide - Revision 7 Figure 6- 8 Edit Access Code Ste p 1 Select the desired feature fo r the new or edited access code from the Feature Description drop-down field. Ste p 2 Enter the code to be used for this feature in the Access Cod e field.
System Information 6-9 MA4000 Installation Manag er User Guide - Revision 7 S peed Calling T a b The Speed Calling feature allows a us er or attendant console to call frequently dialed numbers using fewer digit s (Abbreviated Call Codes) than normally required.
6-10 System Information MA4000 Installation Manager User Guide - Revision 7 Figure 6- 10 Edit System Speed Calling Ste p 1 Enter the de sired number in the S peed Calling Number field (a maximum of 24 digit s). Ste p 2 Enter the code to be used for this feature in the Abbreviated Call Code field.
7-1 MA4000 Installation Manag er User Guide - Revision 7 7 Advanced Features This chapter describes the MA4000 Instal lation Manager’ s Advanced Features section tabs (see Figure 7-1 ).
7-2 Advanced Features MA4000 Installation Manager User Guide - Revision 7 System Features (ASYD) T ab The System Features (ASYD) tab ( Figure 7-2 ) defines the ranges of station numbers the Installation Manager wi ll use to assign phone numbers to users.
Advanced Features 7-3 MA4000 Installation Manag er User Guide - Revision 7 memory (DM), local data memory (LDM), and network data memory (NDM) (see Figure 7-3 ). By defa ult, Instal lation Mana ger supp lies init ial values for these necessary paramete rs and uploads them to the CPU during the installation process.
7-4 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Ste p 2 Enter the appropri ate information to the Syst em , Index , Dat a , Bit , and Note fields. The information containe d in the Dat a field is in hexidecimal format. Ste p 3 If editing an existing feature, click the OK button to a ccept the changes.
Advanced Features 7-5 MA4000 Installation Manag er User Guide - Revision 7 Feature Restrictions T ab Information entered in the fields on the Feature Restrictions (ASYD) tab are for Phase 1 installations only .
7-6 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 4 Advanced Features - Feature Restrictions T ab •E d i t button When you select a Service F e ature Class, then click the Edit button, Figure 7-5 initiall y displays.
Advanced Features 7-7 MA4000 Installation Manag er User Guide - Revision 7 Figure 7- 5 Edit Service Feature Restrictions (SFC) - Day T ab Y ou are then allowed to p rovide a description of the SFC number selected, and the service features to be assigned to the SFC number .
7-8 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 6 Edit Service Feature Restri ctions (SFC) - Night T ab — Selecting the Allow Day and Night Service Feature Restrictions check box allows the service feature restrictions to be av ailable day or night.
Advanced Features 7-9 MA4000 Installation Manag er User Guide - Revision 7 Route Restrictions T ab Information entered in the fields on the Route Restrictions tab are for Phase 1 instal lations onl y . There are 16 Route Restriction Classes (RSC) and 16 Service Feature Classes (SFC) av ailable on your system.
7-10 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 7 Advanced Features - Route Restrictions T ab The Route R estrictions (RSC) (see Fig ure 7-7 ) provides a list of restriction classes in the system. The list is pro vided as an enhancement.
Advanced F eatures 7-1 1 MA4000 Installation Manag er User Guide - Revision 7 (Optional) Click the Allow/Restrict All Data check box to instruct your system whether to allow or restrict Atte ndant Incoming, Attendant Outgoing, Direct Inco ming, or Direct Outgoing Calls.
7-12 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 9 Edit RSC - Night T ab.
Advanced Features 7-13 MA4000 Installation Manag er User Guide - Revision 7 • New Toll button Select a R oute R estriction Class, and click the New bu tton, Figure 7- 10 displays.
7-14 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7-1 1 Edit T oll - Outgoing Connection - Night T ab —U s i n g t h e Day tab, when the 3/6 Toll Restriction option is selected, Figure 7-12 displa ys.
Advanced Features 7-15 MA4000 Installation Manag er User Guide - Revision 7 Figure 7- 12 Edit T oll - Outgoing Selection — Selecting the Add button displa ys Figure 7-13 .
7-16 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 13 Edit Route T oll Restriction — Enter the destination and whether their is a restriction or not.
Advanced Features 7-17 MA4000 Installation Manag er User Guide - Revision 7 Least Cost Routing (LCR) T ab Information entered in the field s on the Least Cost Routing (LCR) tab are for Phase 1 instal lations on ly .
7-18 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Y ou can enable the Least Cost Routing by deselecting the Load Default LCR check box. Ste p 1 Choose the LCR number to be programm ed and select the Edit button. Figure 7-15 displays .
Advanced Features 7-19 MA4000 Installation Manag er User Guide - Revision 7 At this point, the user may need to configure a local or network pattern. If so, the user can optionally specif y whether the LCR is in voked only during certain time periods.
7-20 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 17 Edit Time of Day Patterns — Enter the desired time sequences, not to exceed 24 hours.
Advanced Features 7-21 MA4000 Installation Manag er User Guide - Revision 7 Figure 7- 18 Edit Least Cost Routing Data Ste p 8 Using the Number of Digits to Skip field, the user must specify the number of digits (in the dialed stre am) the system will strip out (or digit s skipped).
7-22 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 19 Additional Digit T r anslation (AADC) Ste p 1 1 Enter the additional digit s and select the OK butt on. Step 12 Select the Priority Restriction Class . Step 13 Use the Kind of T runk fiel d to specify whether the trunk is IP or non-I P .
Advanced Features 7-23 MA4000 Installation Manag er User Guide - Revision 7 Automated Call Distribution (ACD) T ab The ACD tab ( Figure 7-20 ) is used to configure the ACD system to connect large amounts of incoming calls automatically to groups composed of ACD agent positions.
7-24 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Y ou can disable the Automated Call Distribution by selecting the Disable ACD (Automated Call Distribution) check box. •E d i t button When you select a OP Code K ey , then click the Edit bu tton, Figure 7-21 displays.
Advanced Features 7-25 MA4000 Installation Manag er User Guide - Revision 7 Open Application Interface (OAI) T ab The OAI Systemtab ( Figure 7-22 ) is the interface joining a variety of facilities in .
7-26 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Y ou can disable the Open Applicati on Interface by selecting the Disable OAI (Open Application Interface) check box. • New button When the Ne w button is sel ected, Figure 7-23 displa ys.
Advanced Features 7-27 MA4000 Installation Manag er User Guide - Revision 7 —M o d i f y t h e Key Code , Chime , Facility Type , and OP-Cod e fields, as needed. • Delete butt on T o delete an existing OAI, highlight the OAI to be rem oved and cli ck the Delete bu tton.
7-28 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Monitor Number T ab AMNO assigns monitored numbers in the PBX. In a ACD system, the monitored numbers programmed in AM NO are the entry points for pilot numbers. Monitored Numbers are also used in OAI applications for call deflection.
Advanced Features 7-29 MA4000 Installation Manag er User Guide - Revision 7 Figure 7- 27 Monitor Number - New or Edit — Enter , modify or select th e desired information in the Monitor Number , UCD (Follow UCD) , Use as Attendant Console , UCD Hunt Group , and Phase fields.
7-30 Advanced Features MA4000 Installation Manager User Guide - Revision 7 Figure 7- 28 Edit UCD Group T emplate • Delete button T o d elete an exis ting Monitor Nu mber , hig hlight the Monitor n umber to be remo ved and click the Delete button. Figure 7-29 will disp lay to confirm whether you want to dele te the Monito r Number .
8-1 MA4000 Installation Manag er User Guide - Revision 7 8 User Assignment s This chapter describes the MA4000 Instal lation Manager’ s User Assignments section. The User Assignments ( Figure 8 -1 ) allows you to manipu late a larg e number of users from an easy to use graphical user interface.
8-2 User Assignment s MA4000 Installation Manager User Guide - Revision 7 •E d i t button Y ou can select one or more records, then clic k the Edit button. Figure 8-2 and Figure 8-3 (Business system type) or Figure 8-4 and Figure 8-5 (Hospitali ty system type) d isplays.
User Assignments 8-3 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 3 Edit User - Business (UMG only).
8-4 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 4 Edit User - Hospitality (except UMG).
User Assignments 8-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 5 Edit User - Hospitality (UMG only) • Add User button The Ad d User button allows y o u to quickly add users while remaining in the Edit User dialog. When the Add User button is click ed, the user’s name fields will blank out.
8-6 User Assignment s MA4000 Installation Manager User Guide - Revision 7 User Assignments - New or Edit User Last Name field Last name of the user . First Name field First name of the user . Phone Name Display field Displays when y ou call another station.
User Assignments 8-7 MA4000 Installation Manag er User Guide - Revision 7 Location field Used to id entify the location of your phone. Phone Model field The models liste d will be based on the IP Phone T ype option selected in Chapter 6 , System Information , St ation Ranges T ab .
8-8 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Button T emplate field The Button Template fi eld allows you to select a button t e mplate. This template contains definitions for t he buttons for that particul ar phone model.
User Assignments 8-9 MA4000 Installation Manag er User Guide - Revision 7 — Macros All template editors make heavy use of macros. When the project is compiled, the MA4000 Installation Manager provides a v alue for each user wherever the macro is used.
8-10 User Assignment s MA4000 Installation Manager User Guide - Revision 7 •C l e a r K e y s button Clicking the Clear K eys button eliminates all the key definitions currently existing in the K ey Data Programming List.
User Assignments 8-1 1 MA4000 Installation Manag er User Guide - Revision 7 The numeric value of the func tion as specified by the SV7000, R16 manual. Y ou can display all the features av ailable, or just by the ACD, AD64, Call F orwarding, CALL PICKUP/PAGE, or FLEX group.
8-12 User Assignment s MA4000 Installation Manager User Guide - Revision 7 • Service Restrictions (SFC) field Y ou can select either Use Myline Settings , SF C - 0 Reserved for Trunks , SFC - 1 through SFC - 13 , SFC -14 Conferencing , or SFC - 15 ACD .
User Assignments 8-13 MA4000 Installation Manag er User Guide - Revision 7 — Button Template Editor - Advanced Tab The Advanced tab ( Fig ure 8-13 ) consists of system specific data or data that is typica lly defaulted for 90% or more of the user .
8-14 User Assignments MA4000 Installation Manager User Guide - Revision 7 Line Preference • Prime Line Pickup (Default) • Set For Other Buttons Note: Speaker , Answer , and Originate Preference ar.
User Assignments 8-15 MA4000 Installation Manag er User Guide - Revision 7 — Button Template Editor - Information Tab Figure 8- 14 Button T emplate Editor - Information T ab Button Layout Section The graphic of the phone is provid ed to the user to show them the button lay out.
8-16 User Assignment s MA4000 Installation Manager User Guide - Revision 7 St ation Range T ype field This section changes depending on the T y pe selection. •M a n u a l O p t i o n Y ou can manually assign an extension number to this user . The user ente rs the station number in the Station Number field.
User Assignments 8-17 MA4000 Installation Manag er User Guide - Revision 7 Route Restrictions (RSC) field The Route R estriction numbers in the system. There are only 16 available, numbered 0 through 15. Service Restrictions (SFC) field The Service Feature Class numbers in the system.
8-18 User Assignment s MA4000 Installation Manager User Guide - Revision 7 T able 8-3 Edit Call Forwarding T emplate Options Option Description {NO ENTR Y} Do not program this call forwarding option. {VOICE MAIL} Assign the voice mail pilot number here.
User Assignments 8-19 MA4000 Installation Manag er User Guide - Revision 7 V oice Mail T emplate Figure 8- 18 New V oice Mail T emplate - General Synchronize with VM Server button Select this button to the match the cu rrent template pr operties with the VM server .
8-20 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Reset V alues to Default button Select this button to reset the current template properties to the default val u e s.
User Assignments 8-21 MA4000 Installation Manag er User Guide - Revision 7 Group Membership s section Understanding t he Group Assignments The Group Assignments lets y ou define call handling for groups of users . Groups should contain at leas t two members.
8-22 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 21 New Pickup Group T emplate - General •A d d button The Add b utton creates a new entry . Figure 8-22 displays. • Delete butt on The Delete button removes a selected entry .
User Assignments 8-23 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 22 Select Users.
8-24 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 23 New Pickup Group T emplate - Information —T h e Notes field allows the user to enter any free form text associated with a user .
User Assignments 8-25 MA4000 Installation Manager User Guide - Revision 7 Hunt Fields When a hunt group temp late is chos en the user is automatically added to the hunt group . The template de termines whether the hunt group is Circular , Pilot, o r UCD.
8-26 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 24 Edit Hunt Group - Circular T emplate Option.
User Assignments 8-27 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 25 New Hunt Group - Pilot T emplate Option.
8-28 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 26 Secretary Option.
User Assignments 8-29 MA4000 Installation Manag er User Guide - Revision 7 Hunt (UCD) Options: •N o n e •N e w ( s e e Figure 8-27 ) Figure 8- 27 New UCD Group T emp late.
8-30 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Misc Section Figure 8- 28 Misc. Jack ID field The Jack ID is used only for reporting purp oses. It is useful when it comes to cable management , phone placement and running of cross- connects.
User Assignments 8-31 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 29 Edit Phone Accessory T emplate - General T able 8-4 Option Description T emplate Name User enters a unique Phone Accessories T emplate name here. Handset Cord This is the length of the cord from the handset to the base.
8-32 User Assignment s MA4000 Installation Manager User Guide - Revision 7 T able 8-5 Phone Adapters Series i Series E Common Listing Remarks AD(A) ADA-U ADA Ancillary Device Adapter AP(A) AP A Analog.
User Assignments 8-33 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 31 Warning - Delete User Profile.
8-34 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Import button The Import button launches the User Import Wizard . The User Im port Wizard allows the user to import the user information from a text (or .
User Assignments 8-35 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 33 User Import Wizard - Import File Ste p 2 Use the Location of file field to specify the co mplete pa th and file name to be used to import users, or select the Browse button to open an existing file.
8-36 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 34 Record Separation - Record Delimiter Ste p 4 Provide the end of line delimiter to use. The de limiter character choices are: —C o m m a —S p a c e —T a b Ste p 5 Click the Next button to continue.
User Assignments 8-37 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 35 Select Import V alue - Field Names Ste p 6 Y ou may change the name of any of the fields being imported by selecting the field name an d editing its name in the Name field.
8-38 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 36 Default V alues - Field Mapping Ste p 8 For each field option listed in the left column , use each drop-down box located in the right column to sele ct the matching imported field.
User Assignments 8-39 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 37 Column Match - Default Values Ste p 9 S pecify the default values for each import ant field for each user . When finished, click the Next button. Step 10 The User Import Wizard will begin impo rting each file and creating new users.
8-40 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 38 User Import Wizard - Completing User Import Dat a Ste p 1 1 After the file is imported, the user is presented with the result s of the import. If there were any errors, they will be re ported here as well.
User Assignments 8-41 MA4000 Installation Manag er User Guide - Revision 7 •E x p o r t button The Export button allows the user to expo rt the list of selected users. The user will first sel ect a set of users and click the Export bu tton. When the user clicks the Expo rt button, Figure 8-39 displays.
8-42 User Assignment s MA4000 Installation Manager User Guide - Revision 7 • Pickup Group Name • Hunt Group Name •J a c k I D •O l d P h o n e N u m b e r After the export is complete, Figure 8-40 displays.
User Assignments 8-43 MA4000 Installation Manag er User Guide - Revision 7 •U p d a t e W i z a r d button Figure 8- 41 User Update Wizard - Welcome to Installation Manager User Up date Wizard Step 13 Click the Next button to proceed. Figure 8- 42 displays.
8-44 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 42 User Update Wizard - Select Operation Step 14 Select the user records to up date using the Add , Remove , Ad d All , or Remove All buttons, then click the Next button to proceed.
User Assignments 8-45 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 43 User Update Wi zard - Select V alues Step 15 Set the default value of each field. Click the Next button to proceed. Figure 8-44 displays. If a user selects a phone model with no button layout (Analog, SIP , etc.
8-46 User Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 8- 44 User Update Wi zard - V erify Settings Step 16 Review the settings specified. If satisfied with the values, click the Next button to continue. Figure 8-45 displays.
User Assignments 8-47 MA4000 Installation Manag er User Guide - Revision 7 Figure 8- 45 User Update Wizard - Completing the User Update W izard Step 17 Click the Finish button.
8-48 User Assignments MA4000 Installation Manager User Guide - Revision 7.
9-1 MA4000 Installation Manag er User Guide - Revision 7 9 Group Assignment s This chapter describes the MA4000 Instal lation Manager’ s Group Assignments section ( Figure 9- 1 ). Figure 9- 1 Group Assignments •E d i t button The user will select a group from the list box, then select the Edit butt on.
9-2 Group Assignments MA4000 Installation Manager User Guide - Revision 7 • Edit Pickup Group Figure 9- 2 Edit Pickup Groups T emplate - General.
Group Assignments 9-3 MA4000 Installation Manag er User Guide - Revision 7 Figure 9- 3 Edit Pickup Groups T emplate - Information.
9-4 Group Assignments MA4000 Installation Manager User Guide - Revision 7 • New button When the user selects the New button, Figure 9-4 dis plays. Figure 9- 4 Select Users - New Group Ste p 1 Use the radio buttons to select the ap propriate Group T ype, then click the OK button.
Group Assignments 9-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 9- 5 New Hunt Group - Cir cular T emplate - Group.
9-6 Group Assignments MA4000 Installation Manager User Guide - Revision 7 Figure 9- 6 New Hunt Group - Cir cular T emplate - Information.
Group Assignments 9-7 MA4000 Installation Manag er User Guide - Revision 7 Figure 9- 7 New Hunt Group - Pilot T emplate - Group The same secretary may be included in multiple groups (the multiple secretary feature). The secre tary can no t be a member of Pilot or Circul ar Hunt Group s.
9-8 Group Assignments MA4000 Installation Manager User Guide - Revision 7 Figure 9- 8 New Hunt Group - Pilot T emplate - Information.
Group Assignments 9-9 MA4000 Installation Manag er User Guide - Revision 7 Figure 9- 9 New UCD Group T emplate - Group.
9-10 Group Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 9- 10 New UCD Group T emp late - Information.
Group Assignments 9-1 1 MA4000 Installation Manag er User Guide - Revision 7 Figure 9-1 1 New Pickup Groups T emplate - Gene ral.
9-12 Group Assignment s MA4000 Installation Manager User Guide - Revision 7 Figure 9- 12 New Pickup Group T emplate - Information • Delete button The user first se lects a hunt gr oup to delete, then clicks the Delete button.
10-1 MA4000 Installation Manag er User Guide - Revision 7 10 Circuit Card Assignment s This chapter describes the MA4000 Instal lation Manager’ s Circuit Card Assignments section ( Figure 10-1 ).
10-2 Circuit Card Assignments MA4000 Installation Manager User Guide - Revision 7 Figure 10-2 NEAX IPX / IPX DM / UNIVERGE IPX Circuit Card Assignment s Figure 10-3 UNIVERGE SV7000 Circuit Card Assign.
Circuit Card Assignments 10-3 MA4000 Installation Manag er User Guide - Revision 7 Figure 10-4 NEAX IPX UMG Circuit Card Assignment s Creating a New Circuit Card Assignment (UMG) An Ultr a Module Grou.
10-4 Circuit Card Assignments MA4000 Installation Manager User Guide - Revision 7 Ste p 9 Click in the diagram or use the Slot drop-down menu to select a slot you wish to configure (see Figu re 10-7 ). Step 10 Use the Card dro p-down menu to select the ca rd you wish to configure in the selected slot.
Circuit Card Assignments 10-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 10-5 UNVERGE SV8500 Circuit Card Assignments The Chassis LEN numbers (see Figure 10-6 ) are based on the information provided by the user when the “Create Project Wizard” on page 3-7 is performed.
10-6 Circuit Card Assignments MA4000 Installation Manager User Guide - Revision 7 •Z o o m I n button When the Zo om In button is click ed, Figure 10- 7 displays.
Circuit Card Assignments 10-7 MA4000 Installation Manag er User Guide - Revision 7 Figure 10-8 New Chassis — Select the Physical Chassis or Virtual Chassis option button to add the desired PIR to the Circuit Card Assignments panel.
10-8 Circuit Card Assignments MA4000 Installation Manager User Guide - Revision 7.
1 1-1 MA4000 Installation Manag er User Guide - Revision 7 11 Inst all This chapter describes the MA4000 Instal lation Manager’ s Install section ( Figure 11-1 ). Figure 1 1-1 Pre-Installation Check List Ste p 1 Ensure all the actions listed in the checklist are com pleted before continuing with installation.
The device type displayed in Figure 1 1-2 is dependent on the syste m selected. For example, the UNIVERGE SV8500 options are: 1 1-2 Install MA4000 Installation Manager User Guide - Revision 7 NOTE.
Install 1 1-3 MA4000 Installation Manag er User Guide - Revision 7 Ste p 3 Select the features to use during inst allation. — Compile Installation Plan — Flash System Memory Card ( SV8500 not supp.
1 1-4 Install MA4000 Installation Manager User Guide - Revision 7 Figure 1 1-3 Phased Installation Check List Ste p 5 Click the Next button to proceed. Figure 1 1-4 displays providing the progress st atus throughout the compil ing pr ocess. It provides the st atus of what is currently being compiled, a list of warnings, and a list of errors.
Install 1 1-5 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-4 Compile User Phone Assignments Progress — If an error is encountered during the compiling process, Figure 1 1-5 displays.
1 1-6 Install MA4000 Installation Manager User Guide - Revision 7 Figure 1 1-5 Installation W arning - Stop Installation Query — Select the Ye s button to halt the installation immedi ately . — Select the No button to ignore the error encountere d and continue.
Install 1 1-7 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-6 Initialization of System Flash Card UNIVERGE SV8500 is not supported. The flash card installation need s to be installed using the MPS System CD-ROM. Ste p 7 T o initialize a System Flash Card: — Insert the Flash Card into the PC PCMCIA slot.
1 1-8 Install MA4000 Installation Manager User Guide - Revision 7 — When complete exit the program. Fi gure 3-31 and Figure 1 1-7 or Figure 1 1-8 displays.
Install 1 1-9 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-8 Installing IPX Flash Card Ste p 8 Follow the installa tion procedures listed.
1 1-10 Install MA4000 Installation Manager User Guide - Revision 7 Figure 1 1-9 System Software Registration Step 10 Activate the regis tration process by clicking the Reg ister System button. See “If the Initial Installation Execute button is clicked, Figure 3-32 displays.
Install 1 1-1 1 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-10 Backup/Restore Voice Server Data Memory Step 12 Select the type of backup to perform then select the Next button.
1 1-12 Install MA4000 Installation Manager User Guide - Revision 7 Figure 1 1-1 1 Media Gateway Setup Step 13 Ensure each Media Gateway has been configured and connected to the network, then select the Next button. Figure 1 1-12 displays. The Media Gateway Setup dialog box wil l not display if there is no Media Gateway circuit card inserted.
Install 1 1-13 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-12 Upload Data to System Step 14 After the in stallation plan upload finishes, Figure 1 1-13 displays.
1 1-14 Install MA4000 Installation Manager User Guide - Revision 7 Figure 1 1-13 V oice Mail Ser ver Setup Step 15 Click the Next button. Figure 1 1-14 displays.
Install 1 1-15 MA4000 Installation Manag er User Guide - Revision 7 Figure 1 1-14 Installation Complete Step 16 Click the Finish button to complete the inst allation process.
1 1-16 Install MA4000 Installation Manager User Guide - Revision 7.
12-1 MA4000 Installation Manag er User Guide - Revision 7 12 Report s This chapter describes the MA4000 Instal lation Manager’ s Reports section ( Figure 12-1 ). The user will be able to print sev era l useful reports. Many reports won’t be meaningful or useful until the information has been compiled.
12-2 Report s MA4000 Installation Manager User Guide - Revision 7 Creating and Printing a Report or DESI Label Ste p 1 Click a report to sele ct it, then click Run . The report dialog displays. Ste p 2 Click a radio button, drop-down list, or check box to specify the report's scope, then click OK .
Reports 12-3 MA4000 Installation Manager User Guide - Revision 7 DESI Label for Series E (DTP-16D) Prints Desi labels for a single user , for a range of users, or for all users. DESI Label for Series i (DTR-2D) Prints Desi labels for a single user , for a range of users, or for all users.
12-4 Reports MA4000 Installation Manager User Guide - Revision 7.
13-1 MA4000 Installation Manag er User Guide - Revision 7 13 Productivity Features This chapter describes the MA4000 Installation Manager’ s Productivity Features section ( Figure 13-1 ) tabs.
13-2 Productivity Features MA4000 Installation Manager User Guide - Revision 7 The Productivity Features menu provides access to applications you use in conjunction with Installat ion Manager . These applications launch in a separ ate window and perform specific func tions you need to configure your system properly .
Productivity Features 13-3 MA4000 Installation Manag er User Guide - Revision 7 Figure 13-2 Productivity Features - Configuration T ab.
13-4 Productivity Features MA4000 Installation Manager User Guide - Revision 7 UC Suite - MA 4000 Manager Ste p 1 Select To o l s → Configuratio n → UC Suite — MA4000 Manager , then click the Run button.
Productivity Features 13-5 MA4000 Installation Manag er User Guide - Revision 7 — Click Return to close the MA400 0 Configur ation dialog. This sele ction does not stop a current up load in progress.
13-6 Productivity Features MA4000 Installation Manager User Guide - Revision 7 Figure 13-4 View S tatus Example.
Productivity Features 13-7 MA4000 Installation Manag er User Guide - Revision 7 Location Diversity Location Diversity all ows you to re gist er an IP telephon e with up to two backup nodes when operating in a Fusion (FCCS) network.
13-8 Productivity Features MA4000 Installation Manager User Guide - Revision 7 Location Diversity - FCCS T ab Before you can begin configur ing Location Diversity you must scan your Fusion network so Installation Manager can save node informat ion to its database.
Productivity Features 13-9 MA4000 Installation Manag er User Guide - Revision 7 — Installation Manager sca ns your ne twork and displays a list of it s nodes.
13-10 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Location Diversity - S tation Backup T ab Selecting the Station Backup tab ( Figure 13-8 ) results in a table listing the existing backup nodes for vi siting stations.
Productivity Features 13-1 1 MA4000 Installation Manag er User Guide - Revision 7 Designating Primary , Secondary , and T ertiary Backup S tations Users can select multiple Primary stat ions and assign them to the list. Ste p 1 T o designate Primary , Secondary , and T ertiary station s, click New .
13-12 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Ste p 4 Click the backup stations (multiple stations can be selected) in the list to select it, then use the IP-KIND drop-down menu to specify whe ther the backup station is a Dt erm IP , SIP phone, etc.
Productivity Features 13-13 MA4000 Installation Manag er User Guide - Revision 7 Figure 13-10 Location Diversity - Extended Backup Data Ste p 3 (Optional) Use the Remove Secondary Dat a check box to delete existing data for the secondary backup st ation.
13-14 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Ste p 5 (Optional) Use the Remove T ertiary Dat a check box to delete existing data for the tertiary backup station.
Productivity Features 13-15 MA4000 Installation Manager User Guide - Revision 7 Ste p 3 Click Ye s to delete all the station data, or No to delete only the backup station from the list. — The entry now displays in the backup station list with a red background, indicating the station will be deleted during the next Location Diversity data upload.
13-16 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Location Diversity - S tation Pool Dat a T ab Installation Manager Location Diversity allows users to reserve extensions by creating station pool data. See Figure 13-11 .
Productivity Features 13-17 MA4000 Installation Manag er User Guide - Revision 7 The user can also add new pool data or edit/delete an existing pool. Installation Manager displays the last previously synchroniz ed pool data in the table. The Status column identifies the tr ansaction.
13-18 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Ste p 3 Use the TEC T ype field to select the appropriate pool number . — Installation Manager ’s location diversity populates the available LENS ba sed on the TEC T ype and Pool Size .
Productivity Features 13-19 MA4000 Installation Manag er User Guide - Revision 7 Location Diversity - Key T emplate T ab Installation Manager Location Div ers ity allows users to create new K ey T emplates and save the new template data to the database.
13-20 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Creating or Editin g a Key T emplate Ste p 1 T o create a new Key T emplate, click New .
Productivity Features 13-21 MA4000 Installation Manag er User Guide - Revision 7 —U s e t h e Line Key Pattern d rop-down menu to specify the number and type of key patterns as signed to the station. — Use the Pa ttern dr op-down menu to specify one of 16 key p atterns the station will use.
13-22 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 SUBLINE TELN number and Ringing Information If you selected Func tion , use the Featur es By Name list to select the feature you wish to assign to the selected function key .
Productivity Features 13-23 MA4000 Installation Manag er User Guide - Revision 7 Location Diversity - ADVF T ab Assignment of Default Value for FCCS Location Diversity Installation Manager Location Div ersity allows users to assign a default value for the FCCS Location Diversit y .
13-24 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Location Diversity - AFCMN T ab Assignment of FCCS Locati on Diversity Miscellaneous Data for NDM Installation Manager Location Div ers ity allows users to assign FCCS Location Diversity Miscellaneous data for NDM.
Productivity Features 13-25 MA4000 Installation Manager User Guide - Revision 7 Ste p 4 In the Monitoring Level p ane, enter a value be tween 60-300 seconds to specify how long a backup station waits before atte mpting to re-establish a connection to it s original PBX.
13-26 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Location Diversity - Upload T ab Installation Manager Location Div ersity allows users to compi le and upload specific data or all of the Location Div ersity data to the FCCS network.
Productivity Features 13-27 MA4000 Installation Manag er User Guide - Revision 7 Figure 13-19 Location Diversity - Upload Compile Ste p 4 Clicking the Upload button sends all new an d modified dat a to the fusion network.
13-28 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Management T ab The Management tab ( Fi gure 13-20 ) consists of the followi ng application: • Fusion Netwo rk Manager Allows the user to add Fusion network nodes and manage network telephone number .
Productivity Features 13-29 MA4000 Installation Manag er User Guide - Revision 7 —S o f t w a r e K e y C o d e Dual CPU systems require ke y codes for both CPUs. During the registration process, the wizard will connect to your system to obtain the key codes automatically .
13-30 Pr oductivity Features MA4000 Installation Manager User Guide - Revision 7 Maintenance T ab The Maintenance tab ( Figure 13-22 ) cons ists of the following applications: • Flash Ca rd Wizard Formats, writes, and pro vides backup for PBX files to a PCMCIA flash memory card (see Flash Card Wizard .
For additional informatio n or support on this NEC Inforntia product, contact your NEC Infrontia representative..
MA4000 Installation Manager User Guide NEC NEC Infrontia, Inc. NDA-30580, R e vision 7.
An important point after buying a device NEC MA4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC MA4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC MA4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC MA4000 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC MA4000 will certainly help you make a decision on the purchase.
If you already are a holder of NEC MA4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC MA4000.
However, one of the most important roles played by the user manual is to help in solving problems with NEC MA4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC MA4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
