Instruction/ maintenance manual of the product D1756 Asko
Go to page of 28
DEAR ASKO CUSTOMER W elcome to the family of ASK O customers . W e hope that y ou will g et many years of g ood use of your new dishwasher . T he dishwasher is v ery sophisticated. In order to get best possible use of your machine and all its functions we recommend you to read this Use and Care Guide before you use the dishwasher .
2 SERVICE SER VICE Before calling for ser vice, chec k to see whether the faults is due to something that you can put right yourself . See T rouble shooting pages 24-26.
3 CONTENTS READ FIRST Safety 4 Children ’ s safety 5 The par ts of the dishwasher 6 T echnical dat a 6 Baskets 7 Dispenser 8 Control panel, symbols 8 HOW TO USE THE DISHW ASHER Before y ou star t 9 .
4 PULL-LA TCH (FULL Y INTEGRA TED MACHINES ONL Y) The machine will stop if the door is opened during operation. Howev er, since the machine is fitted with a pull-latch, splashing may occur if the door is opened too quick l y . Ther efore, unlatch the door carefully and wait until the spray ar ms have stopped rotating before opening fully .
5 CHILDREN’S SAFETY ! MACHINE WITH CHILD-SAFETY LOCK? T o activa te the child-safety lock, if fitted, lift and turn the screw slot with a screwdriver to a horizontal position. T he screw slot is located to the left of the handle. Reset by turning the slot to its vertical position.
6 1. KNIFE BASKET 2. UPPER BASKET 3. LAMP 4. SPRA Y ARMS 5. LOWER BASKET 6. CUTLERY BASKET 7. RINSE AID FILLING 8. RINSE AID DISPENSER 9. DETERGENT COMP AR TMENT 10. MAIN POWER SWITCH 11. PROGRAMME P ANEL 12. COARSE FIL TER 13. FINE FIL TER 14. TYPE PLA TE * Deviations may occur depending on the model and the mark et con- cerned.
7 1. ADJUST ABLE RACK FOR LONG-STEMMED GLASSES 2. ADJUST ABLE AND FOLDING RACKS 3. DET ACHABLE PLA TE RACK 4. CUTLER Y BASKET WITH ADJUST ABLE AND FOLDING COVER * Deviations may occur depending on the mo- del and the market concerned.
8 Intensive Normal Quick Rinse & hold Drying 1. MAIN POWER INDICA TION 2. INDICA TION LAMPS 3. INTENSIVE W ASH 4. NORMAL W ASH 5. QUICK W ASH 6. RINSE AND HOLD 7. DRYING HEA T 8. DISPLA Y 9. RINSE-AID INDICA TION DISPENSER 1. COMP AR TMENT FOR MAIN W ASH DETERGENT 2.
9 BASIC INSTRUCTIONS The following step-by-step instr uctions will help you to achie ve the best possible results . FILL THE BASKETS PROPERL Y Y our dishwasher features the ASK O Super Cle- aning System ™ .
10 Place larger plates , dishes , pots , sauce pans and cutler y (in the cutler y basket) in the low er basket. The detachable plate rack that is supp- lied with some models can easily be lifted out to provide space f or big plates , sauce pans and pots , or be fitted in one of the three different posi- tions.
11 Intensive wash Use the Intensive wash programme for heavily soiled ware, such as pots and pans, and gratin for ms. The dishwasher can suitably be loaded with other items if not completely filled. Normal wash Use this programme for normal washing. It is devised for normally soiled glasses, cups and saucers, plates, dishes, etc.
12 CONSUMPTION FIGURES W ashing time (ca. min)* Energy (ca. kWh) W ashing time (ca. min)** Energy (ca. kWh) W ater (litre) 70° 55° 55° - 22 1 - 11 1 - 22 2 1 Ye s N o N o N o 95 80 35 4 1.0 0.5 0.4 0.01 135 110 50 4 1.9 1.1 0.9 0.01 25.0 17.5 14.0 3.
13 OPTION DR YING HEAT The dr ying heat button lights if dr ying hea t is selected. Press ag ain if you want a pr og ramme without dr ying heat, and the lamp will g o out.
14 ECO W ASH W ASH ONL Y WHEN FULL Sav e energ y by not r unning the machine until it is completely full. CONNECT TO COLD W A TER SUPPL Y If the machine is connected to a cold water supp- ly , r unning time will be long er because hea ting of the water will take longer .
15 For a variety of reasons, some articles are unsu- itable for mac hine washing . Some materials can- not withstand high temperature, other s can be damaged by dishwasher detergents . SENSITIVE DECORA TION China that has “on-glaze“ decoration (feels a litt- le rough) should not be machine washed.
16 CLEANING CLEANING The inside of the machine is made of stainless steel, which is k e pt c lean by nor mal use. Howe - v er, deposits of lime can be for med inside the mac hine if the water is hard. If this happens , r un a Nor mal wash prog ramme with tw o table- spoonful of citric acid in the deterg ent compar t- ment.
17 W ARNING Do not use a spray of any kind close to the door lock. Spray arms Spray-arm jets and bearings may sometimes be- come clogged. Screw off the nut and take off the washer on top of the spray arm and lift off the ar m. P oke out any obstr uctions with a ske- w er or other suitable pointed tool.
18 TOPPING UP WITH RINSE AID Dr ying will be faster if you use rinse aid. The rinse-aid indicating lamp on the panel will light when the rinse-aid container becomes empty .* There is also an indicator on the dispenser. See the figure . T here is sufficient rinse aid av ailable if the indica tor is completely black.
19 SAL T FILLING WITH SAL T The salt compar tment must be filled with salt before using a mac hine that is equipped with a water softener . Use coarse salt or reg enerating salt that is especially intended for dishwashers.
20 REPROGRAMMING Some of the machine functions can be reprog rammed. Access to reprogramming of the machine is g ained via the ordinar y contr ol buttons as explained below . Any alteration made will remain intact until the next time you alter the functions .
21 SETTING THE W A TER LEVEL The machine takes in a suitable amount of water when the lev el r eaches the mark on the lower spra y pipe bearing, see illustration. Chec k the le vel b y opening the door after about 2 minutes during a Nor mal programme .
22 SETTING THE PUMPING-OUT TIME T he pumping-out time can suitably be extended if you are using a long drain hose , max. 3 metres , or if the machine for any other reason has difficulty in pumping out the waste water in time . Proceed as follows: 1. PRESS INTENSIVE W ASH FIVE TIMES* (WITHIN 15 SECONDS) 2.
23 F AUL T INDICA TIONS INDICA TOR LAMPS I NDICA TION DISPLA Y TYPE OF F AUL T ACTION DOOR IS OPEN PREVENTING ST ART OF THE SELECTED CLOSE THE DOOR PROGRAMME ELEMENT MALFUNCTION CONSUL T SERVICE TOO M.
24 TROUBLE SHOOTING - DISHW ASHING RESUL TS F AUL T - POOR W ASHING PERFORMANCE Possible causes 1. Rota tion of spray arms pr evented b y protr uding object. Check also that jets in the spra y ar ms are not clogged. 2. Spray ar ms slowed down b y impurities in the bearings .
25 • V er y hard w ater . Compensate with acidic rinse aid. Still not clean after testing with citric acid? • The cause is pr obably temperature that is too high and/or too much detergent. T his type of film, or etching, cannot be remedied, only prevented.
26 TROUBLE SHOOTING - DISHW ASHER If the machine does not w or k, chec k first to find out if the reason is a simple fault that you can remedy yourself . T r y to locate the fault with the aid of the f ollowing description. T r y the tr ouble- shooting prog ramme also , see F ault indications .
27 PERFORMANCE INFORMA TION EXAMPLE OF HOW TO LOAD THE MACHINE TECHNICAL DA T A Height: 820–890 mm Width: 596 mm W eight: 4 8 k g * 51kg with water softener* Capacity: 14 AS covers W ater pressure: 0.03–1.0 MP a W ater pressure: 0.15–1.0 MP a 1.
QUICK GUIDE 1.FILL THE BASKETS Remo v e larg e partic les of food and waste. It is not necessary to rinse, thanks to the Super Cleaning System ™ . 2. DOSE THE DETERGENT The deter gent compar tment has a small space for pre-w ash and a lar g er space for the main wash.
An important point after buying a device Asko D1756 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asko D1756 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asko D1756 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asko D1756 you will learn all the available features of the product, as well as information on its operation. The information that you get Asko D1756 will certainly help you make a decision on the purchase.
If you already are a holder of Asko D1756, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asko D1756.
However, one of the most important roles played by the user manual is to help in solving problems with Asko D1756. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asko D1756 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
