Instruction/ maintenance manual of the product 1905 Asko
Go to page of 17
1 1905, DW 955 Printed on paper friendly to the environment. How to use your dishwasher AU/NZ Important! Read right through these instructions before using your dishwasher for the first time, in order to obtain the best performance from it.
2 How to use your new dishwasher Follow the steps in the strip along the top of each page for a brief summary of the instructions. Further details and advice are on the page below the strip.
3 1 Start/Stop Lamp Open the door by pulling the handle forwards and upwards. Press the main on/off switch. How to open the door if the child safety catch is engaged: Slide the safety catch to the left and then lift the handle upwards.
4 2 . 3 Load the baskets Be careful when washing items made of certain materials (see page 12). Add detergent Pre-wash and Main wash: in the detergent com- partment Close the door after you have added the detergent. Upper basket Load glasses, cups, bowls, small plates, saucers, long items of cutlery and carving knives into the upper basket.
5 4 6 5 T echnical details W arning! Dishwasher detergent is corrosive – take care to keep it out of the reach of children. Make sure that children cannot get hold of dishwasher detergent. If any is accidentally swallowed, give plenty to drink: one or two glasses of milk or water.
6 If you have used programme 1, 2 or 3 by the last wash, the machine remembers it and you need only press the Start pushbutton to get the same programme.
7 • Press the Start button The machine will start and work through the selected programme automatically. • Want to change your mind? • If you turn off the machine at the main on/off switch (or if there is a power failure) before the programme has finished, the programme will continue when power is restored.
8 By pressing you can select temperature in the programmes: In The Intensive, Strong, Normal and Light wash you can select 55, 65, 70 or 75 ° C. In the other programmes you can select 45, 55 or 65 ° C. Selected temperature is shown in the display for 3 seconds.
9 If you wash-up delicate items as fine china or thin glasses, big temperature changes mean risk for cracking. If the machine is connected to cold water, you can make the machine cool down the dishes after the first pre-wash and the main wash (65 ° C), before cold water enters the machine for the next step.
10 T oo little water in the machine? The water level is correct when it reaches up to the marking of the lower spray pipe bearing, see picture. If there is insufficient water in the machine, it may be because the supply pressure is too low. This can be compensated for by altering the admission time.
11 . . . assists fault-tracing If the machine doesn't work properly, you can identify the reason. This allows you to describe the fault to service personnel and saves repair time. Start the fault-tracing programme by pressing the pushbutton 5 times within 15 seconds.
12 W ash these items with care: Some items must not be machine-washed. There are several reasons: some materials cannot withstand the high temperature, while others can be damaged by the detergent used. China/porcelain marks Modern china or porcelain may be marked underneath with a code that indicates its suitability for machine washing.
13 Dishwashers with water softeners: Salt container cover The salt container in machines fitted with water softeners must be prefilled with water then salt before the machine is used for the first time. Use coarse salt or salt specially intended for use in dishwasher water softeners.
14 Filter You can reach the outlet pump from the inside of the machine. First remove the coarse strainer and the fine strainer. Then you can remove a small cover in the bottom of the hole. There you can rach the pump wing and remove eventual dirt. replace the cover and the strainers.
15 If the machine does not work If the machine does not work, check to see whether there is some simple fault that you can rectify your- self. Follow the instructions below. Aslo check page 11, Fault-tracing programme. Problem Response 1. You have forgotten to press the main switch.
16 Safety Service and guarantee To disengage the child safety catch Slide the catch to the left and turn the trace horizontal with a screwdriver. To open the door, hold the catch with your left hand and pull the main catch with your right hand in the usual way.
17 3 2 1 Choose the right programme Do as follows We reserve the right to make changes. . . . and that the water is turned on. Load the baskets and fill with deter- gent. Check that the spray arms can rotate freely . . . Close the door and select the pro- gramme.
An important point after buying a device Asko 1905 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asko 1905 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asko 1905 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asko 1905 you will learn all the available features of the product, as well as information on its operation. The information that you get Asko 1905 will certainly help you make a decision on the purchase.
If you already are a holder of Asko 1905, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asko 1905.
However, one of the most important roles played by the user manual is to help in solving problems with Asko 1905. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asko 1905 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
