Instruction/ maintenance manual of the product LCD1525V NEC
Go to page of 18
MultiSync LCD 1 525V ™ User’s Manual MultiSync ® LCD 1 525V ™ User’s Manual NEC LCD Seri es Y ou can register your product online at www .nectech.
Index W arning 1 Contents 2 Quick Start 3-5 Controls 6-7 Recommended Use 8-9 Specifications 10 Features 11 T r oubleshooting 12 References 13 Limited W arranty 14 TCO’99 15-16 A vertissement 17 Cont.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
Contents 2 Your new NEC Technologies MultiSync ® LCD monitor box* should contain the following: • MultiSync LCD 1525V ™ monitor with tilt base • Power Cord • AC Adapter • Video Signal Cable • User’s Manual * Remember to save your original box and packing material to transport or ship the monitor .
Quick Star t To attach the MultiSync ® LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.
M u lti S 4 Figure E.1 Figure C.1 Figure D.1 Clip A Clip B Power Switch Quick Star t cont. 78134641.wpc 5/4/99, 5:37 PM 6.
5 78134641.wpc 5/4/99, 5:38 PM 7.
6 OSM ™ (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: Control Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM controls main menu. CONTROL / Moves the highlighted Moves the highlighted area area up/down to select up/down to select one of the one of the controls.
7 Controls AccuColor ® Control System Five color presets select the desired color setting. If a setting is adjusted, the name of the setting will change to Custom . Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue color depending upon which is selected.
6 8 Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
Specifications 10 Monitor MultiSync ® LCD 1525V ™ Notes Specifications Monitor LCD Module Diagonal: 15.1 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 15.
11 Features Wider Compatibility: Because the MultiSync LCD monitor is analog through and through, it does not require special analog to digital display or interface cards but can accept RGB input directly. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations.
T roubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used.
13 References • BBS (978) 742-8706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem.
14 Limited W arranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agree.
TCO’99 15 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product devel- oped for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
16 TCO’99 cont. accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorine and bromine.
An important point after buying a device NEC LCD1525V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC LCD1525V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC LCD1525V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC LCD1525V you will learn all the available features of the product, as well as information on its operation. The information that you get NEC LCD1525V will certainly help you make a decision on the purchase.
If you already are a holder of NEC LCD1525V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC LCD1525V.
However, one of the most important roles played by the user manual is to help in solving problems with NEC LCD1525V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC LCD1525V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
