Instruction/ maintenance manual of the product LCD1525V NEC
Go to page of 20
English LCD1525E.PM5 99/06/09, 14:33 Page 11 PageMaker 5.0J.
LCD1525E.PM5 99/06/09, 14:33 Page 12 PageMaker 5.0J.
Introduction to the NEC MultiSync LCD 1525V E - 1 Intr oduction to the NEC MultiSync LCD 1525V Congratulations on your purchase of the NEC MultiSync LCD 1525V true colour monitor! W ider Compatibility.
IPM (Intelligent Power Manager) System Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two- thirds of your monitor ener gy costs, reducing emissions and lowering the air conditioning costs of the workplace.
Contents Y our new NEC MultiSync LCD monitor box should contain the following: – NEC MultiSync LCD 1525V . – AC Power Cord. – AC Adapter . – V ideo Signal Cable. – User ’ s Manual. Remember to save your original box and packing material to transport or ship the monitor .
Recommended Use Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the MultiSync LCD colour monitor: • DO NOT OPEN THE MONIT OR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
• AC Adapter shall not be used outdoors. • Handle with care when transporting. Save packaging for trans- porting. • The inside of the fluorescent tube located within the LCD moni- tor contains mercury . Please follow the bylaws or rules of your local municipality to dispose of this tube properly .
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONIT OR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
Installation T o attach the MultiSync LCD 1525V monitor to your system, follow these instructions: 1. T urn of f the power to your computer . 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.
E - 8 Installation Figure A.1 Figure B.1 15-pin mini D-SUB Mac Adapter (not included) 15-pin mini D-SUB LCD1525E.PM5 99/06/09, 14:33 Page 20 PageMaker 5.
Installation E - 9 MultiSy n Figure D.1 Figure E.1 Figure C.1 Clip B Clip A Power Button LCD1525E.PM5 99/06/09, 14:33 Page 21 PageMaker 5.0J.
E - 10 Installation LCD1525E.PM5 99/06/09, 14:33 Page 22 PageMaker 5.0J.
Contr ols OSM Controls The OSM controls on the front of the monitor provide the following functions: NOTE: When RESET is pressed, a warning window will appear allow- ing you to cancel the RESET function. Controls E - 1 1 T o access OSM press any of the control buttons ( , , , ) or the PROCEED button.
E - 12 Controls Brightness and Contrast Brightness Adjusts the overall image and background screen brightness. Contrast Adjusts the image brightness in relation to the background. Auto Adjust Corrects the image displayed for non-standard video inputs.
Controls E - 13 Auto Adjust Automatically adjusts the H. Size or Fine settings. Colour Contr ol System Five options select the desired colour setting. If a setting is adjusted, the name of the setting will change to Custom. Colour Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue colour depending upon which is selected.
E - 14 Controls Factory Pr eset Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to take ef fect. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.
Specifications E - 15 Display Input Signal Display Colours Synchronisation Range Resolutions Supported Active Display Area** 38 cm (15.1 inch) viewable image size; 1024 x 768 native resolution (Pixel Count); active matrix; thin film transistor (TFT); liquid crystal display (LCD); 0.
Power Supply Current Rating Dimensions W eight Operating Environmental Considerations Storage Environmental Considerations E - 16 Specifications T emperature Humidity T emperature Humidity AC 100-240 V @ 50/60 Hz 0.4 A @ 100-120 V / 0.25 A @ 220-240 V 370(W) x 325(H) x 151(D) mm 4.
T roubleshooting/Support E - 17 Problem No picture Power Button does not respond Image persistence Check These Items - The signal cable should be completely connected to the display card/computer . - The display card should be completely seated in its slot.
E - 18 T roubleshooting/Support Problem Image is unstable, unfocused or swimming is apparent LED on monitor is not lit (no green or amber colour can be seen) Display image is not sized properly Check These Items - Signal cable should be completely attached to the computer .
An important point after buying a device NEC LCD1525V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC LCD1525V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC LCD1525V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC LCD1525V you will learn all the available features of the product, as well as information on its operation. The information that you get NEC LCD1525V will certainly help you make a decision on the purchase.
If you already are a holder of NEC LCD1525V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC LCD1525V.
However, one of the most important roles played by the user manual is to help in solving problems with NEC LCD1525V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC LCD1525V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
