Instruction/ maintenance manual of the product colour monitor NEC
Go to page of 21
Appendix Español Français Deutsch English Italiano Introduction to the NEC MultiSync LCD 2110 Congratulations on your purchase of the NEC MultiSync LCD 2110 true colour monitor! NuCycle Plastic A special silicone compound for PC resin, being extremely flame- retardant, safe and environmentally friendly.
Appendix Español Français Deutsch English Italiano OSM (On-Screen Manager) Controls Allow you to quickly and easily adjust all elements of your screen image via simple to use on-sreen menus. ErgoDesign Features Enhance human ergonomics to improve the working environment, protect the health of the user and save money.
Appendix Español Français Deutsch English Italiano Introduction to the NEC MultiSync LCD 2110 E - 3 FullScan Capability Allows you to use the entire screen area in most resolutions, significantly expanding image size.
Appendix Español Français Deutsch English Italiano Contents of Package Your new MultiSync LCD monitor box should contain the following: E - 4 Contents of Package – NEC MultiSync LCD 2110 (Model LA-2141JMW-P) – AC power cable. – AC Adapter. (Type A2440S01) – Video Signal Cable – 15 pin VGA to BNC.
Appendix Español Français Deutsch English Italiano Recommended Use For optimum performance, please note the following when setting up and using the MultiSync LCD 2110 colour monitor: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
Appendix Español Français Deutsch English Italiano E - 6 Recommended Use CAUTION: • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources.
Appendix Español Français Deutsch English Italiano Recommended Use E - 7 • Handle with care when transporting. Save packaging for transporting. • This LCD monitor is designed for use with a flexible arm, therefore it is delivered without stand. Please use the attached screws (4pcs) when installing.
Appendix Español Français Deutsch English Italiano Installation Connection to your Personal Computer The MultiSync LCD 2110 true colour monitor complements PC compatible computers. Your system has one of two configurations: – the video controller is built into the computer.
Appendix Español Français Deutsch English Italiano Installation E - 9 (Figure C.1). Place the 15-pin VGA to BNC Cable under clip A (Figure D.1A). Then place the 15-pin VGA to BNC cable under Clip B (FigureD.1B). 5. Connect the D-SUB cable to D-SUB connector on the back of the monitor (Figure C.
Appendix Español Français Deutsch English Italiano 9. To complete the setup of your MultiSync LCD monitor: A. Set the resolution to 1600 x1200 @60 Hz. B. Use the following OSM controls: • Auto Adjust Contrast • Auto Adjust • Image Adjust – Fine NOTE: Manual adjustment of the H/V Position and Image Adjust H.
Appendix Español Français Deutsch English Italiano Installation E - 11 Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.
Appendix Español Français Deutsch English Italiano E - 12 Installation Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Figure R.1 Figure RL.1 Fi g ure TS.1 78134811.PM5 99.
Appendix Español Français Deutsch English Italiano 1 2 3 4 Installation E - 13 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position (Figure RL.
Appendix Español Français Deutsch English Italiano E - 14 Controls Controls BNC/D-SUB: Allows you to change between the BNC and D-SUB signal inputs. OSM Controls The OSM controls on the front of the monitor provide the following functions: To access OSM press any of the control buttons ( , , , ) or the PROCEED or EXIT button.
Appendix Español Français Deutsch English Italiano Controls E - 15 Brightness/Contrast Controls BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO ADJUST CONTRAST Adjusts the image displayed for non-standard video inputs.
Appendix Español Français Deutsch English Italiano E - 16 Controls Image Adjust Controls H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting.
Appendix Español Français Deutsch English Italiano Controls E - 17 Information Indicates the current display resolution, frequency setting and type of Sync signal of the monitor. NOTE: If the or button is pressed while TYPE is highlighted, then Sync Type is switched between Separate Sync and Sync On Green.
Appendix Español Français Deutsch English Italiano E - 18 Specifications Multisync LCD 2110 Display 54.1 cm (21.3 inch) viewable image size; 1600 x 1200 native resolution (Pixel Count); active matrix; thin film transistor (TFT); liquid crystal display (LCD); 0.
Appendix Español Français Deutsch English Italiano Specifications E - 19 Power supply AC 100-120 V / 220-240 V @ 50/60 Hz DC 24V Current Rating @ 100-120V / 0.9A @ 220-240V / 0.5A @ DC 24V / 3.3A Dimensions Landscape 498(W) x 501(H) x 246(D) mm Portrait 417(W) x 541(H) x 246(D) mm Hight Adjust 80mm Weight 11.
Appendix Español Français Deutsch English Italiano E - 20 Troubleshooting/Support Problem Check These Items No picture - The signal cable should be completely connected to the display card/computer. - The display card should be completely seated in its slot.
Appendix Español Français Deutsch English Italiano Troubleshooting/Support E - 21 Problem Cheak These Items Image is unstable, - Signal cable should be completely attached to the unfocused or computer. swimming is - Use the OSM Image Adjust controls to focus and apparent adjust display by increasing or decreasing the Fine Control.
An important point after buying a device NEC colour monitor (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC colour monitor yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC colour monitor - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC colour monitor you will learn all the available features of the product, as well as information on its operation. The information that you get NEC colour monitor will certainly help you make a decision on the purchase.
If you already are a holder of NEC colour monitor, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC colour monitor.
However, one of the most important roles played by the user manual is to help in solving problems with NEC colour monitor. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC colour monitor along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
