Instruction/ maintenance manual of the product AccuSync AS192 NEC
Go to page of 17
AccuSync AS192 User ’ s Manual.
Index W arning, Caution ............................................................................................................... .......... English-1 Registration Information .....................................................................
English English-1 W ARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . TO FULL Y DISENGAGE THE POWER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK).
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE ACCUSYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English English-5 Macintosh Cable Adapter (not included) Contents Y our new NEC AccuSync LCD monitor box* should contain the following: • AccuSync LCD monitor with tilt base • Power Cord • Video.
English-6 3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on the back of the monitor ( Figure B.1 ). 4. Connect one end of the power cord to the monitor and the other end to the power outlet. Place the Video Signal Cable and power cord to the Cable holder ( Figure C.
English English-7 Figure R.1 Non-abrasive surface Figure R.2 Figure R.3 Removing the Base Stand NOTE: Always remove the Base Stand when shipping the LCD. 1. Place monitor face down on a non-abrasive surface ( Figure R.1 ). 2. While using your thumbs, press the bottom tabs upward to unlock.
English-8 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic function at pressing each key 2. OSD structure Shows OSD. Shortcut to Brightness adjustment window . Button OSD not showing Shortcut to Contrast adjust window .
English English-9 BRIGHTNESS Adjusts the overall image and background screen brightness. T o enter ECO MODE, press the “ 1 2/RESET ” button. ECO MODE OFF: Sets brightness variable to 100% ECO MODE1: Sets brightness to 70%. This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.
English-10 OSD TURN OFF The OSD control menu will stay on as long as it is in use. In the OSD T urn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10 - 120 seconds by 5-second increments.
English English-11 Specifications Monitor Specifications AccuSync AS192 Monitor Notes LCD Module Diagonal: 48.2 cm/19.0 inches Active matrix, thin film transistor (TFT) Viewable Image Size: 48.
English-12 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and light weight allow it to be moved or transported easily from one location to another .
English English-13 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position.
English-14 TCO Displays 5 Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
English English-15 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company ’ s top priorities in trying to minimize the burden placed on the environment.
An important point after buying a device NEC AccuSync AS192 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC AccuSync AS192 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC AccuSync AS192 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC AccuSync AS192 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC AccuSync AS192 will certainly help you make a decision on the purchase.
If you already are a holder of NEC AccuSync AS192, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC AccuSync AS192.
However, one of the most important roles played by the user manual is to help in solving problems with NEC AccuSync AS192. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC AccuSync AS192 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
