Instruction/ maintenance manual of the product NL-6003P Navilock
Go to page of 9
NL-6003P u-blox NEO-6P MD6/seriell Receiver Operation manual (62457 ).
1. Introduction The NL-6003P is a M D6/serial GNSS receiv er with internal antenna and ublox NEO-6P GPS module. This modul e allows a positioni ng accuracy of under one me tre through a combination of PPP (Precision point Positioning) and SBAS technologies.
2. Starting operation You may connect the NL -6003P either to the serial interface of y our PC using an M D6 to DB9 adapter cable, or to the USB interface o f your PC using an M D6 to USB adapter cable. MD6 to DB9: http:// www.navilock.de/produkt e/G_61265/merkmale .
If the NME A protocol is display ed in u-Center, but you cannot find a receiver in the application software, the connec tion problem is not w ith the receiv er, but with the selected software setting. In this case, the so ftware manufacturer suppo rt center may be abl e to help you .
6. EGNOS configuration wi th u-Center 7.xx NL-6003PU use EGNOS as default. In the con figuration menu you can check these optio ns. For detailed in formation please use the documenta tion from u-blox http://w ww.u-blox.com . 7. Assist GPS configuration with u-Center 7 .
Further information to the u-Center can be found in the u-blox documentation under http://www.u-blox.co m/products/u_cen ter.html If you have any questions, please contact u-blox directly. Danger of explosion a t contact with fire! Do not permanently expose the receiv er to temperatures of ov er 60° C (140° F ).
9. Specifications Chipset manufacturer/type u-blox NEO-6P GPS Channels: 50 channels Sensitivi ty: -160 dBm Frequency: L1, 1575.42 MH z C/A Code: 1.023 MHz Target precisions: GPS Position horizon tal: .
11. Warranty period Your GPS receiv er will be repaired free of charge withi n the legal warranty period, unless i t was damaged due to ex ternal cases, humidity dropping or other da mages due to improper usa ge. Your dealer is alw ays ready to help you.
Conformity declaration Please dow nload the Declaration of Confor mity from http://w ww.navilock.de/support / in the conformity are a. WEEE note The WEEE ( Waste Electrical and Electronic Equipment) directiv e, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of u sed electric product s.
An important point after buying a device Navilock NL-6003P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Navilock NL-6003P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Navilock NL-6003P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Navilock NL-6003P you will learn all the available features of the product, as well as information on its operation. The information that you get Navilock NL-6003P will certainly help you make a decision on the purchase.
If you already are a holder of Navilock NL-6003P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Navilock NL-6003P.
However, one of the most important roles played by the user manual is to help in solving problems with Navilock NL-6003P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Navilock NL-6003P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
