Instruction/ maintenance manual of the product 7110 Navigon
Go to page of 60
User's manual NAVIGON 7100 | 7110 English (UK) February 2008.
This symbol showing a crossed-thr ough refuse container signifies that, within the European Union, the product must be disposed of as sorted waste. This applies both to the product itself, as well as to all accessories that carry this symbol . This product may not be disposed of with unsorted household waste.
User's manual NAVIGON 7100 | 7110 User's manual Table of Contents III Table of Contents 1 Introduction ....................................................................................... 6 1.1 About this manual ......................
User's manual NAVIGON 7100 | 7110 IV Table of Contents User's manual 5.1.1 Initialising the GPS receiver ...................................................... 19 5.2 Specifying a new destination .........................................
User's manual NAVIGON 7100 | 7110 User's manual Table of Contents V 10 Useful f unctions .............................................................................. 43 10.1 GPS status, storing the current location ....................
User's manual NAVIGON 7100 | 7110 - 6 - Introduction 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics : Registered names, company and product descriptions.
User's manual NAVIGON 7100 | 7110 Before you begin - 7 - trademarks of their respective owners. Every right that is not explicitly accorded is reserved. The absence of the explicit labelli ng of registered trademarks used in this manual does not imply that the br and is not subject to the rights of a third party.
User's manual NAVIGON 7100 | 7110 - 8 - Before you begin 2.2 Description of the NAVIGON 7100 | 7110 1 Touch screen 2 Microphone 3 Reset 4 Headset socket (also used to connect TMC-antenna) 5 LED 6.
User's manual NAVIGON 7100 | 7110 Before you begin - 9 - 2.3 Preparing NAVIGON 7100 | 7110 for use 2.3.1 Charging the recharg eable battery It is possible that the rechargeable battery is not fully charged when you remove it from the packaging. We recommend that you fully charge the battery before using the device for the first time.
User's manual NAVIGON 7100 | 7110 - 10 - Before you begin 2.3.3 Preparing the navigation s ystem for use Caution! Please be sure to refer to the safety inform ation in chapter " Important safety information" on page 11. Securing the cradle 1.
User's manual NAVIGON 7100 | 7110 Before you begin - 11 - Caution! The car charger cable is to be connected to cigarette lighters with an operating voltage of 12V only. Connecting the TMC-ante nna The NAVIGON 7100 | 7110 has a n integrated TMC-receiver.
User's manual NAVIGON 7100 | 7110 - 12 - Before you begin Caution! Do not look at the display unless it is absolutely safe to do so ! Caution! Traffic regulations have priority over any instructions from the navigation system.
User's manual NAVIGON 7100 | 7110 Before you begin - 13 - Note: Do not unplug by pulling on the cable. Doing so could damage the cable! Note: If you want to transport the navigation device, use the cover provided in order to protect the touchscreen from s cratches.
User's manual NAVIGON 7100 | 7110 - 14 - Operating the navigation soft ware 3 Operating the navigation software 3.1 Volume The volume of the spoken driving instructions can be adjusted during navigation. You have started navigation. The map is open in Navigati on or Destination search mode.
User's manual NAVIGON 7100 | 7110 Operating the navigation soft ware - 15 - The device is being supplied by an external power source. The batt ery is being charged. The device is being supplied by its internal battery. The battery charge is sufficient.
User's manual NAVIGON 7100 | 7110 - 16 - Operating the navigation soft ware Connected : The NAVIGON 7 100 | 7110 is connected to another device. Not co nnected : The NAVIGON 7100 | 7110 is not connected to another device. Bluetooth is activated. 3.
User's manual NAVIGON 7100 | 7110 Password Lock - 17 - You can toggle the list by means of the (Up ) and (Down ) buttons. In order to accept an entry from the list, simply tap on it. The list closes as soon as you have accepted an entry. 3.5 Options Some windows offer options that lead to further fun ctions.
User's manual NAVIGON 7100 | 7110 - 18 - Navigation 4.2 Changing a password 1. In the M AIN WINDOW , tap on Options > Settings > Options > Password Lock . The P ASS WO RD L OCK windo w opens. 2. Enter the password that is currently valid in the Old password field.
User's manual NAVIGON 7100 | 7110 Navigation - 19 - Impaired GPS reception If GPS reception is impaired, navigation will be interrupted. The navigation software remains active. As soon as GPS reception is restored, the navigation system calculates any change of position which has occu rred in the meantime.
User's manual NAVIGON 7100 | 7110 - 20 - Navigation In the right-hand top corner of the display, you will see the GPS symbol. As soon as data from at least 3 sa tellites is received, the symbol changes to GPS Ready .
User's manual NAVIGON 7100 | 7110 Navigation - 21 - The C OVERED COUNTRIES list closes again. The symbol will display the country code of the destination country. Note: Only countries of which at least a part is represented on the currently loaded map may be selected.
User's manual NAVIGON 7100 | 7110 - 22 - Navigation Note: For detailed information on ho w to start navigation, please refer to chapter " Starting navigation" on page 27.
User's manual NAVIGON 7100 | 7110 Navigation - 23 - 5. Tap the Start Navigation button. The map opens in Preview mode. For detailed information on how to start navigation, please refer to chapter " Starting navigation" on page 27.
User's manual NAVIGON 7100 | 7110 - 24 - Navigation 5. Tap on the name of the destination. 6. Tap the Start Navigation button. The map opens in Preview mode. For detailed information on how to start navigation, please refer to chapter " Starting navigation" on page 27.
User's manual NAVIGON 7100 | 7110 Navigation - 25 - ► Tap the (Destination Info ) butto n. The D ESTINATION I NFO window op ens. It contains all the information about the specified destination that is stored in the navigation system's database.
User's manual NAVIGON 7100 | 7110 - 26 - Navigation Information on how to store a destination can be found in chapter " Saving a destination" on page 29. 1. In the M AIN WINDOW , tap on My Destinations > Favourites . 2. Tap the destination to which you would like to navigate.
User's manual NAVIGON 7100 | 7110 Navigation - 27 - 3. Tap the Start Navigation button. The map opens in Preview mode. For detailed information on how to start navigation, please refer to chapter " Starting navigation" on page 27. 5.6 Determining destinations on the map You may indicate a destination directly on the map.
User's manual NAVIGON 7100 | 7110 - 28 - Managing Destinations Route Profile A so called route profile forms the basis of the route calculation. Tap the Route Profile button if you want to view or change the route profile. Note: If you change the route opt ions, these remain valid for subsequent navigation.
User's manual NAVIGON 7100 | 7110 Managing Destinations - 29 - 6.1 Saving a destination 1. Enter a destination as described in " Specifying a new destination" on page 20. Do not tap the Start Navigation button! . 2. Tap on Options > Save Destination .
User's manual NAVIGON 7100 | 7110 - 30 - Routes with stages The dialog window closes. The destination will now appear in the F AVOU R IT ES list marked b y a symbol. 7 Routes with stages It is possible to plan routes without GPS-reception, in the comfort of your home for example.
User's manual NAVIGON 7100 | 7110 Routes with stages - 31 - Changing the s tarting point ► Tap the Specify Starting Point field. The S TARTING P OINT menu opens. You can now enter a differ ent starting point. Proceed as described above. 7.1.2 Entering route points Route points are destinations on the r oute that you want to navigate to.
User's manual NAVIGON 7100 | 7110 - 32 - Routes with stages 7.2 Managing routes You can save each planned route under a particular name. Note: Only the start point and route points will be saved, not, however, the calculated route. If you load a route that has been saved, it must be recalculated before navigation can begin.
User's manual NAVIGON 7100 | 7110 Routes with stages - 33 - 7.3.2 Simulating routes It is also possible to simulate navigation. Note: The reception of GPS-signals is not necessary for simulation. Simulation is restricted to routes of 60 mi max. You have calculated and displayed a route.
User's manual NAVIGON 7100 | 7110 - 34 - Options Starting nav igation ► Tap the Start Navigation button or simply start driving. No GPS reception If the received GPS signal is insufficient, the following message will appear: "GPS reception is currently not sufficient.
User's manual NAVIGON 7100 | 7110 Options - 35 - For more detailed information, please refer to chap ter "GPS status" on page 43. Home Address : Saves the selected destination as your home address. You can then begin navigation to this destinat ion very quickly by tapping the Take Me Home button in the M AIN WINDOW .
User's manual NAVIGON 7100 | 7110 - 36 - Working with the map Rename : Opens a window in which you can change the name for the selected destination or route.
User's manual NAVIGON 7100 | 7110 Working with the map - 37 - 1 The route is highlighted in orange. 2 A triangle in orange shows your current position. If you display a planned or loaded route and the specified starting point is not the same as your current location, then the current position may or may not be shown on the preview.
User's manual NAVIGON 7100 | 7110 - 38 - Working with the map 9.3 Map in Navigation mode After the route has been viewed in Preview mode, navigation will start. The map opens in Navigation mo de. 1 Signposting to be followed is displayed here. 2 Effective speed limits are di splayed here (where available).
User's manual NAVIGON 7100 | 7110 Working with the map - 39 - 8 The remaining distance to the destinat ion, the estimated duration of the trip, and the estimated time of arrival can be seen in the Tot al field. 9 A triangle in orange shows your current position on the map.
User's manual NAVIGON 7100 | 7110 - 40 - Working with the map The navigation system will first guide you to this interim destination. Afterwards, you may simply conti nue navigation to your original destination. Skip Route Point : Tap this button to omit the next route point.
User's manual NAVIGON 7100 | 7110 Working with the map - 41 - Note: Reality View mode is not available for ever y motorway junction. Availability is dependent on the map data in use. 9.5 Map in Destination search mode The map is always in Destinatio n search mode when a pair of cross hairs can be seen.
User's manual NAVIGON 7100 | 7110 - 42 - Working with the map Entire Route : Zooms the map so that the entire route is visible. Current Position : Selects the map section shown so that the current location is centred. 9.5.1 Operating in Destination search mode 1.
User's manual NAVIGON 7100 | 7110 Useful functions - 43 - ► Tap the (Back ) button to return to the M AIN WINDOW . If you are currently navigating, you will be prompted to confirm your decision to quit navigation.
User's manual NAVIGON 7100 | 7110 - 44 - Useful functions 1 Schematic depiction of the next junction where you must turn. 2 Distance to this junction. 3 Name of the street onto which you must turn. 4 Indicates whether you want to travel on the relevant route section or not.
User's manual NAVIGON 7100 | 7110 Useful functions - 45 - 10.3 TMC (Traffic Information) The integrated TMC receiver enables the navigation system to make use of current traffic messaging. If necessary, it can change your route dynamically in order to avoid a traffic jam, for example.
User's manual NAVIGON 7100 | 7110 - 46 - Useful functions ► Hold frequency : Use the arrow buttons in the station section to tune into another frequency.
User's manual NAVIGON 7100 | 7110 Configuring NAVIGON 7100 | 71 10 - 47 - 11 Configuring NAVIGON 7100 | 7110 The S ETTINGS window is where you can adapt N AVIGON 7100 | 7110 to suit your personal requirements. The settings can be reached via the options of several windows.
User's manual NAVIGON 7100 | 7110 - 48 - Handsfree Module You can close the settings windows in two ways: ► Tap the Done button. Any changes you have made will be adopted. ► Tap the Cancel button. Any changes you have made will not be adopted.
User's manual NAVIGON 7100 | 7110 Handsfree Module - 49 - Note: These settings in the B LUETOOTH M AN AG E R window do not have to be changed in order to operate the hands-free m odule. NAVIGON urgently recommends not to change these settings and not to use the other functions.
User's manual NAVIGON 7100 | 7110 - 50 - Handsfree Module 6. Tap on > OK . The B LUETOOTH HF P HONE window opens. A connection is established between the two devices. At the bottom edge of the screen, the name of the connected mobile phone is displayed.
User's manual NAVIGON 7100 | 7110 Handsfree Module - 51 - ► Tap on (Pick up , bottom left, green handset) if you want to take the call. The C ALL IN P ROGRESS window opens. ► Tap on (Hang up , bottom right, red handset) if you do not want to take the call.
User's manual NAVIGON 7100 | 7110 - 52 - Handsfree Module (Incoming calls ) (Outgoing calls ) (Missed calls ) 3. Tap on the desired number. 4. Tap repeatedly on (Make a call ) until a '+' is displayed on the button ( ). The number will be dialled as soon as you let go of the button.
User's manual NAVIGON 7100 | 7110 Handsfree Module - 53 - 12.6.1 Adjusting the v olume ► In the C ALL IN P ROGRESS window, tap on (Louder ) or (Quieter ) to adjust the volume of the conversation. The volume will be displayed in the C A LL IN P ROGRESS window.
User's manual NAVIGON 7100 | 7110 - 54 - Handsfree Module Note: If Bluetooth is activated on t he mobile phone, the connection can also be established during a call. (See chapter "Connecting to a mobile phone" on page 50) 12.6.5 Entering numbers You can enter numbers during a call.
User's manual NAVIGON 7100 | 7110 Handsfree Module - 55 - 12.7 Hands-free module troubleshooting Many of the problems that may arise with the hand s-free module can be solved in the following way: 1. Open the B LUETOOTH HF P HONE window. 2. Deactivate Bluetooth on the mobile phone.
User's manual NAVIGON 7100 | 7110 - 56 - Appen dix 13 Appendix 13.1 Technical data Dimensions 131.6 x 92.4 x 23.0 mm Weight approx. 195 g Operating temperature -10°C bis 60°C Storage temperature -20°C bis 70°C Operating conditions Humidity 0% bis 90%, non-precipitating CPU Samsung 2440-400Mhz Operating System Microsoft Windows ® CE Net 5.
User's manual NAVIGON 7100 | 7110 Appen dix - 57 - 13.2 Declaration of Conformity Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directiv e (R&TTE) .
User's manual NAVIGON 7100 | 7110 - 58 - Index 14 Index B Block............................................ 40, 44 Bluetooth Connect ........................................ 50 Connection with Mobile Phone ..... 49 Handsfree Module ..............
User's manual NAVIGON 7100 | 7110 Index - 59 - Handsfree Module Close ............................................. 48 Connect ........................................ 50 Connection with Mobile Phone ..... 49 Open ................................
User's manual NAVIGON 7100 | 7110 - 60 - Index Route Profile ................................. 33 Save .............................................. 32 Simulation ..................................... 33 Start Navigation ........................
An important point after buying a device Navigon 7110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Navigon 7110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Navigon 7110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Navigon 7110 you will learn all the available features of the product, as well as information on its operation. The information that you get Navigon 7110 will certainly help you make a decision on the purchase.
If you already are a holder of Navigon 7110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Navigon 7110.
However, one of the most important roles played by the user manual is to help in solving problems with Navigon 7110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Navigon 7110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
