Instruction/ maintenance manual of the product NI USB-6259 National Instruments
Go to page of 12
USER GUIDE NI USB-6221/6229/6251/6259 OEM This document provides dimensions, p inouts, and information about the connectors, switch, LEDs, and chassis ground of the NI USB-6221/6229/6251/62 59 OEM devices.
NI USB-6221/6229/6 251/6259 OEM User Guide 2 ni.com Dimensions Figure 2 shows the dimensions of the USB-6221/625 1 OEM device. Figure 2. USB-6221/6251 OEM Dimensions in Inches (Millimeters) 0.436 (11.07) 0.392 (9.96) 0.362 (9.19) 0.162 (4.11) 0.062 (1.
© National Instruments Corporatio n 3 NI USB-6221/6229/6251 /6259 OEM User Guide Figure 3 shows the dimensions of the USB-6229/6259 OEM device. Figure 3. USB-6229/6259 OEM Dimensions in Inches (Millimeters) 0.436 (11.07) 0.392 (9.96) 0.362 (9.19) 0.162 (4.
NI USB-6221/6229/6 251/6259 OEM User Guide 4 ni.com I/O Connector Pinouts Figures 4 through 7 show the connect or pinouts for the USB-6221 OEM, USB-6229 OEM, USB-6251 OEM, and USB-6259 OEM devices. Refer to the M Series User Manual at ni.com/manuals for more information about USB-6221/622 9/6251/6259 signal s and how to connect them.
© National Instruments Corporatio n 5 NI USB-6221/6229/6251 /6259 OEM User Guide Figure 4. USB-6221 OEM Connector Pinout AO 0 AO 1 AI GND AI GND AI GND AI 8 AI 1 AI GND AI 10 AI 3 AI GND AI 12 AI 5 A.
NI USB-6221/6229/6 251/6259 OEM User Guide 6 ni.com Figure 5. USB-6229 OEM Connector Pinout AO 0 AO 1 AI GND AI GND AI GND AI 8 AI 1 AI GND AI 10 AI 3 AI GND AI 12 AI 5 AI GND AI 14 AI 7 AI GND AO GND.
© National Instruments Corporatio n 7 NI USB-6221/6229/6251 /6259 OEM User Guide Figure 6. USB-6251 OEM Connector Pinout AO 0 AO 1 AI GND AI GND AI GND AI 8 AI 1 AI GND AI 10 AI 3 AI GND AI 12 AI 5 A.
NI USB-6221/6229/6 251/6259 OEM User Guide 8 ni.com Figure 7. USB-6259 OEM Connector Pinout AO 0 AO 1 AI GND AI GND AI GND AI 8 AI 1 AI GND AI 10 AI 3 AI GND AI 12 AI 5 AI GND AI 14 AI 7 AI GND AO GND.
© National Instruments Corporatio n 9 NI USB-6221/6229/6251 /6259 OEM User Guide LEDs USB-6221/6229/6251/625 9 OEM devices have two LEDs that reflect the device state. The green READY LE D indicates whether the device is powered on and co nfigur ed as a USB device.
NI USB-6221/6229/6251 /6259 OEM User Guide 10 ni.com Power Switch The power switch on the USB-6221/62 29/6251/6259 OEM device po wers the device on and off. Figure 10 shows the pins on the power switch. Figure 10. Power Switch (USB-6229/6259 OEM Shown) Pin 1 is connected to VDC th rough the fuse (ref erence designator XF1).
© National Instruments Corporation 11 NI USB-6221/6229/6251 /6259 OEM User Guide Chassis Ground Chassis ground provides a connection betw een the enclosure and USB ground. D GND is connected to the chassis ground thro ugh an internal connection to hole A, shown in Figure 12.
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of Use section on ni.com/legal for more information a bout National Instruments trademarks. Other product and compan y names mentioned herein are trademarks or trade names of their respective companie s .
An important point after buying a device National Instruments NI USB-6259 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments NI USB-6259 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments NI USB-6259 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments NI USB-6259 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments NI USB-6259 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments NI USB-6259, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments NI USB-6259.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments NI USB-6259. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments NI USB-6259 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
