Instruction/ maintenance manual of the product 6211 National Instruments
Go to page of 7
USER GUIDE NI USB-6211/6218 OEM This document provides inform ation about the d imensions, mounting options, connectors, and other com ponents of the NI USB-6211/6218 OEM devices. Caution There are no product safety , electro magnetic compatib ility (EMC), or CE marking compliance claims made for the USB-6211 /6218 OEM devices.
NI USB-6211/6 218 OEM User Guide 2 ni.com Dimensions Figure 2 shows the dimensions of the USB-6 211 OEM device. Figure 2. USB-6211 OEM Dimensions in Inches (Millimeters) 0.000 (0.00) 0.373 (9.47) 0.000 (0.00) 0.420 (10.66) 1.321 (33.54) 3.022 (76.75) 3.
© National Instruments Corporation 3 NI USB-6211/6218 OEM User Guide Figure 3 shows the dimensions of the USB-6218 OEM device. Figure 3. USB-6218 OEM Dimensions in Inches (Millimeters) 0.091 (2.31) 0.000 (0.00) 0.000 (0.00) 0.373 (9.47) 0.000 (0.00) 0.
NI USB-6211/6 218 OEM User Guide 4 ni.com I/O Connector Pinouts Figure 4 shows the connector pinout on the USB-6211 OEM device. Figure 4. USB-6211 OEM Connector Pinout AI GND AI 7 AI 14 AI GND AI 5 AI.
© National Instruments Corporation 5 NI USB-6211/6218 OEM User Guide Figure 5 shows the connector pinouts on the USB-6218 OEM device. Figure 5. USB-6218 OEM Connector Pinout Note In non-referenced single-ended (NR SE) mode, the USB-6218 OEM device measures AI <0.
NI USB-6211/6 218 OEM User Guide 6 ni.com Board Mounting the USB-621 x OEM The USB-621 x OEM device can be mounted on a motherboard using the 50-pin connector(s) and board mount socket(s), as shown in Figures 6 and 7. Note Y ou can use either one or both 50-pin connectors to board mount the USB-6218 OEM device.
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of Use section on ni.com/legal for m ore informat ion about Nationa l Instruments trademarks. Other product and compan y names mentioned herein are trademarks or trade names of their respective companie s.
An important point after buying a device National Instruments 6211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments 6211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments 6211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments 6211 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments 6211 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments 6211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments 6211.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments 6211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments 6211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
