Instruction/ maintenance manual of the product ZCVF36 Napoleon Fireplaces
Go to page of 12
1 W415-0527/ 09.29.05 INST ALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER. • Do not try to light any appliance. • Do not touch any electrical switch.
2 W415-0527 / 09.29.05 PG 3 INTRODUCTION W arranty 4-6 INST ALLA TION & FINISHING General Instructions Hood Installation Gas Connector Locations Framing Nailing T ab Instruction Mantle Clearances 7 OPTIONS Optional Blower Installation W ARNING • Under no circumstances should this enclosure be modi fi ed.
3 W415-0527/ 09.29.05 NAPOLEON gas fi replaces are manufactured under the strict Standard of the world recognized ISO 9001:2000 Quality Assurance Certi fi cate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work.
4 W415-0527 / 09.29.05 GENERAL INSTRUCTIONS THE INST ALLA TION MUST CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF LOCAL CODES WITH THE NA TIONAL FUEL GAS CODE, ANSI Z223.1 / NFP A 54 AND TO THE NA TIONAL ELECTRICAL CODE, ANSI / NFP A 70. Use only accessories designed for and listed with your speci fi c fi rebox.
5 W415-0527/ 09.29.05 7” 13” There are fi ve gas inlet locations on the ventless fi rebox enclosure. One on each side of the unit, two at the rear , and one on the bottom. Using the following illustrations ( FIGURE 2a-f ) identify the preferred inlet and remove corresponding knock out.
6 W415-0527 / 09.29.05 ANY CHANGE TO THIS ENCLOSURE CAN BE DANGEROUS AND IS PROHIBITED. It is best to frame your ventless fi rebox enclosure after it is positioned.
7 W415-0527/ 09.29.05 1) Attach the nailing tabs to the corner posts using the 2 sheet metal screws supplied. Secure through the centre of the top and bottom slots in the nailing tab and then through the existing holes in the corner posts.
8 W415-0527 / 09.29.05 Secure to the threaded stud using the lock washer and wing nut provided. Ensure that the blower does not touch the fi rebox base or the fi rebox. ( FIGURE 9 ) Attach the connectors from the black and red wires to the blower . The wire harness provided in this kit is a universal harness.
9 W415-0527/ 09.29.05 1. Remove the hearth pads and the blower access cover . ( FIGURE 9 ) 2. Install the blower using the optional blower installation instructions. 3. Pull the black and white thermal disc wires through the 7/8” bushing in the blower access cover .
10 W415-0527 / 09.29.05 REPLACEMENTS Contact your dealer for questions concerning prices and availability of replacement parts. Normally all parts can be ordered through your Napoleon dealer or distributor . FOR W ARRANTY REPLACEMENT P ARTS, A PHOTOCOPY OF THE ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR THE CLAIM.
11 W415-0527/ 09.29.05 W olf Steel Fir eplace Ser vice Histor y This fireplace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Dealer Nam.
12 W415-0527 / 09.29.05 NO TES.
An important point after buying a device Napoleon Fireplaces ZCVF36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces ZCVF36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces ZCVF36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces ZCVF36 you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces ZCVF36 will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces ZCVF36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces ZCVF36.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces ZCVF36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces ZCVF36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
